What is the proper AppleCare part number...

...for the original 11" MBA?
I have the option to purchase 2 different part numbers that are both for MB, MBA and 13" MBP. One is less expensive than the other. I can't seem to find any part number beyond the current one sold in the Apple Store. The part number in question is MC246LL/B. Anyone?

Hi:
I can't find any specs on your notebook to pinpoint the motherboard you need.
Below is the link to the service manual for your notebook series.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
See chapter 3, pages 22 and 23.
If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
Paul

Similar Messages

What is the motherboard part number for hp dv6-3037tx?

I have a bricked laptop and would like to buy a replacement motherboard
What is the motherboard part number for hp dv6-3037tx notebook PC?
Laptop product number is WY285PA.
And also, will the replacement motherboard be identical to the old one (i.e. same GPU). I don't want to get a new motherboard with a crappy GPU, my old one was great.
Thanks

Hi:
I can't find any specs on your notebook to pinpoint the motherboard you need.
Below is the link to the service manual for your notebook series.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
See chapter 3, pages 22 and 23.
If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
Paul

Satellite Pro M70 - What is the Bluetooth module part number

Could someone who has a Toshiba Satellite Pro M70, with bluetooth, tell me the part number of the bluetooth module please?
You can reed it from one of the labels under your notebook. You can read bluetooth in it, the part number is in the up left side of the label, and it will be something like this: PA3418U-BTM.
Thanks.

Hi
Why you dont make a call to the authorized service partner in your country and would order an compatible BT module for your notebook?
In my opinion this would be the easiest way to get one.
Unfortunately Im not owner of Sat Pro M70 and therefore I dont know the BT part number. But my A210 has been equipped with an internal BT module and the part number is PA3608U-1BTM
Greets

What is the Replacement Product Part Number of the SFP MGBSX1 that I can use?

I did a BOM using ESW-520-48-K9 with SFP MGBSX1 (I need 1000BaseSX).
But the configuartion tool said that Unit Price Column: "EOL" indicates item is end of life; N/A indicates item not available in current pricelist

We still sell the MGBSX1 as a refurbished item. You can order part number MGBSX1-RF in Cisco Commerce Workspace.
MGBSX1-RF (Gigabit Ethernet SX Mini-GBIC SFP Transceiver REFURBISHED) - USD 95.00
Best regards,
"Nilz"
Nilo Noguera
.:|:.:|:. Specialist, Cisco Global Virtual Engineering - Cisco Partner Help
http://www.cisco.com/web/partners/tools/ph.html

What is the proper way to record line numbers in Master/Detail records?

Guys and Gals,
Been thinking about this for awhile, but thought it best to ask the people who really know what they are doing.
What is the proper way to record & show line numbers in a Master / Detail record set?
For example, take Master/Detail relationship Orders and OrderItems. Orders has a column Document_Number and OrderItems has Document_Number, Line_Number. Line_Number should contain the row number 1,2,3,4 ... etc. for each row in a document.
Should I ...
<ol><li>Add a sequence and a trigger in the database? The FusionOrderDemo does this, but then the sequence never "resets" and I've got row numbers that keep incrementing. So one document has rows 4,5,6 and the next document has 7,8,9 when they should both have 1,2,3.</li>
<li>Programmatically take care of the row numbers? This seems like I'm asking for trouble. Anytime an insert or delete operation gets done, I'll have to iterate through rows and re-assign row numbers.</li>
<li>Is there a way to assign row numbers in a table iterator (or data collection?) to an entity?</li></ol>
Any suggestions would be appreciated. It's looking like #2 is my only option, but if anyone knows different I'd love the input.
Will

Thank you both guys.
As John said, I believe I'm looking for a gap-free sequence per master record.
The line number of the OrderItems table is the second half of the primary key. The first half of the primary key (DocumentNumber) is the foreign key to the Orders table.
Think of it like line items on an order or invoice. For example, if you were talking to someone on the phone concerning an invoice, you might say, "The pricing for line item #3 is incorrect." In this case, it's good to have a common reference. Or imagine a Microsoft Excel spreadsheet with no row numbers displayed! You'd never get anywhere if you had to explain something over the phone.
If this is tricky to perform, I take it using a sequence and trigger such as the Fusion Order Demo is the best way to approach the challenge for simplicity's sake?
Will

What is the cpu fan part no for dv6 2060ea

what is the cpu fan part no for dv6 2060ea

Hi
Please find the web link given below check the part number under page 4-39 Removal and replacement procedures will let you know how to replace the part and the part number as well.
http://h10032.www1.hp.com/ctg/Manual/c01860375.pdf
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

What is the Proper Way to place a Background Image inside a Div?

I have been searching Google and the Adobe forums for awhile now, and while there are very valid solutions to similar problems I found that none of them fixed the problem that I am facing. I blame myself and getting lost in this sloppy coding of mine, so part of my plan was to start my style sheet over from scratch.
My question, what is the proper way to add a background image into a div? I currently have the top div following the "header" css style, here is what I have typed into that sections:
<style type="text/css">
@import url("../twoColLiqLtHdr.css");
.header {
    width: 1000px;
    height: 300px;
    background-image: url(Assets/HeaderTemplate.png);
    background-repeat: no-repeat;
    background-position: center;
The problem here is that the background image isn't even appearing. I would greatly appreciate any help, could anyone inform me on the proper way to doing this so that I can implement images in divs in the future without turning my coding in a down right mess?
Thank you in advance.

I apologize, I'm unable to post a link to the page just yet. This is a snip of coding for a website still in the making for the company I work for.
Would any of the coding below help?:
</script>
<style type="text/css">

</style>
<link href="../twoColLiqLtHdr.css" rel="stylesheet" type="text/css" />
</head>
<header class="twoColLiqLtHdr">
<scmenu class="twoColLiqLtHdr">
<tab class="twoColLiqLtHdr">
<body class="twoColLiqLtHdr">
<div class="header" align="" id="header">Content Goes Here</div>
<div class="scmenu" align="" id="scmenu">Content Goes Here</div>
<div class="tabs" align="" id="tabs">Content Goes Here</div>
<div class="body" align="" id="body">Content Goes Here</div>
<div class="footer" align="" id="footer">Content Goes Here</div>
<script type="text/javascript">var TFN='';var TFA='';var TFI='0';var TFL='0';var tf_RetServer="rt.trafficfacts.com";var tf_SiteId="11773g197b36be92cde14c11fc77dacc3a2a4f1660eb17h9";var tf_ScrServer=document.location.protocol+"//rt.trafficfacts.com/tf.php?k=11773g197b36be92c de14c11fc77dacc3a2a4f1660eb17h9;c=s;v=5";document.write(unescape('%3Cscript type="text/JavaScript" src="'+tf_ScrServer+'">%3C/script>'));</script>
</body>
</html>
That above is parts I added into the source code.

What is the proper way to demote a Win 2003 Domain Controller running SQL Server 2008 WorkGroup Edition?

Hi,
What is the proper way to demote a Windows 2003 Domain Controller running SQL Server 2008 WorkGroup Edition?
I will be migrating AD from Win 2003 to 2012....
Thanks in advanced.

Running SQL on a domain controller is highly not recommended for performance reasons and for complexities it introduces in the management of both systems (You are already facing this situation now).
I would recommend proceeding like the following before demoting your domain controller:
Install a new SQL server on a member server
Migrate your databases to the new SQL server
Once done, you can safely demote your DC.
More if you ask them here: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=sqlserver
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

What is the proper way to use the write method?

What is the proper way to use the OutputStreams write method? I know the flush() method is automatically called after the write but i cant seem to get any output
to a file. The char array contains characters and upon completion of the for loop the contents of the array is printed out, so there is actually data in the array. But write dosnt seem to do squat no matter what i seem to do. Any suggestions?
import java.io.*;
public class X{
public static void main(String[] args){
try{
FileReader fis = new FileReader("C:\\Java\\Test.txt"); //read chars
FileWriter fw = new FileWriter("C:\\Java\\Test1.txt"); //read chars
File f = new File("C:\\Java\\Test.txt");
char[] charsRead = new char[(int)f.length()];
while(true){
int i = fis.read(charsRead);
if(i == -1) break;
// fw.write(charsRead); this wont work
// but there is infact chars in the char Array?
for(int i = 0; i < charsRead.length -1 ; ++i){
System.out.print(charRead);
}catch(Exception e){System.err.println(e);}

Sorry to have to tell you this guys but all of the above are broken.
First of all... you should all take a good look at what the read() method actually does.
http://java.sun.com/j2se/1.3/docs/api/java/io/InputStream.html#read(byte[], int, int)
Pay special attension to this paragraph:
Reads up to len[i] bytes of data from the input stream into an array of bytes. An attempt is made to read as many as len[i] bytes, but a smaller number may be read, possibly zero. The number of bytes actually read is returned as an integer.
In other words... when you use read() and you request say 1024 bytes, you are not guaranteed to get that many bytes. You may get less. You may even get none at all.
Supposing you want to read length bytes from a stream into a byte array, here is how you do it.int bytesRead = 0;
int readLast = 0;
byte[] array = new byte[length];
while(readLast != -1 && bytesRead < length){
readLast = inputStream.read(array, bytesRead, length - bytesRead);
if(readLast != -1){
bytesRead += readLast;
}And then the matter of write()...
http://java.sun.com/j2se/1.3/docs/api/java/io/OutputStream.html#write(byte[])
write(byte[] b) will always attempt to write b.length bytes, no matter how many bytes you actually filled it with. All you C/C++ converts... forget all about null terminated arrays. That doesn't exist here. Even if you only read 2 bytes into a 1024 byte array, write() will output 1024 bytes if you pass that array to it.
You need to keep track of how many bytes you actually filled the array with and if that number is less than the size of the array you'll need pass this as an argument.
I'll make another post about this... once and for all.
/Michael

What's the proper way to charge my iPod?

What's the proper way to charge my iPod? I am confused because some people say that the ipod fast charges for up to 80% in 2 Hours and full charges up to 100% for the next 2 Hours, 4 Hours total. Now, i sync my iPod on the PC and charges it up to 2 Hours and the indicator on my iPod and iTunes already displayes the "PLUG" icon on the battery. Here's the part where i'm confused, how am i supposed to charge my iPod up to 100%/4 Hours if it will already be full w/in 2 Hours? Is it normal? :/

Lithium ion batteries don't require much special handling. Charge them when ever you want. You don't have to wait until they discharge completely. In fact, the one thing you really shouldn't do with a lithium ion battery is drain it completely and let it sit that way.
Best of luck.

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

Need to convert mini dvi to s video to run a school's Hatiachi ceiling mount projector. What is the proper adapter?

Need to convert mini dvi to s video to run a school's Hatiachi ceiling mount projector. What is the proper adapter?

Check the projector and see what kind of input is has, most have a VGA connector, so you would need a male to male VGA. You will also need the Mac mini dvi to male VGA (of course).
Some of the older projetors have a component in only, which is the red,yellow,green, RCA connectors, which are avaialable. (Usually the are fairy short, 5 ft or so, so you would need to get a VGA with yhe mini DVI to VGA, and a component (the one with the 3 RCA's) you will probaly have to get a Female to Female VGA adapter to connect te VGA to the component.
And finaally if that weren't enough, the really old projectors have only a composite input. All I can say about that is "the hunt is on"
Best of luck

What is the proper way to close all open sessions of a NI PXI-4110 for a given Device alias?

I've found that, when programming the NI PXI-4110 that, if a the VI "niDCPower Initialize With Channels VI" (NI-DCPower pallette) is called with a device
alias that all ready has one or more sessions open (due to an abort or other programming error) a device reference results from the reference out that has a (*) where "*" is post-fixed to the device reference where and is an integer starting that increments with each initialize call. In my clean up, I would like to close all open sessions. For example, let's said the device alias is "NIPower_1" in NI Max, and there are 5 open sessions; NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4). A simple initialize or reset (using niDCPower Initialize With Channels VI, or, niDCPower Initialize With Channels VI, etc.) What is the proper way to close all open sessions?
Thanks in advance. Been struggleing with this for days!

When you Initialize a session to a device that already has a session open, NI-DCPower closes the previous session and returns a new one. You can verify this very easily: try to use the first session after the second session was opened.
Unfortunately, there is a small leak and that is what you encountered: the previous session remains registered with LabVIEW, since we unregister inside the Close VI and this was never called. So the name of the session still shows in the control like you noted: NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4), etc.
There may be a way to iterate over the registered sessions, but I couldn't find it. However, you can unregister them by calling "IVI Delete Session". Look for it inside "niDCPower Close.vi". If you don't have the list of open sessions, but you have the device name, then you can just append (1), (2) and so forth and call "IVI Delete Session" in a loop. There's no problem calling it on sessions that were never added.
However - I consider all this a hack. What you should do is write code that does not leak sessions. Anything you open, you should close. If you find yourself in a situation where there are a lot of leaked sessions during development, relaunching LabVIEW will clear it out. If relaunching LabVIEW is too much of an annoyance, then write a VI that does what I described above and run it when needed. You can even make it "smarter" by getting the names of all the NI-DCPower devices in your system using the System Configuration or niModInst APIs.
Hope this helps.
Marcos Kirsch
Principal Software Engineer
Core Modular Instruments Software
National Instruments

What's the proper protocol for a reset on my ipod touch 4g? iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.

What's the proper protocol for a reset on my ipod touch 4g? iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.
It's a 64G ipod touch and was fine till Apple told me to upgrade to ios 6. Now most of my apps crash, my music won't play and I just get a white screen when I hit Music.
When I try to sync to itunes it acts like it's going to sync and appears to recognize the ipod, but it's grayed out and has an update circle by it that spins for a while until itunes eventually freezes alltogether. Is there a way to go back to ios 5 after a erase and reset?

iOS: Unable to update or restore

What Is The Proper J2EE Architect For This National Defense Project?

A brief description of a national defense project I am looking into is that the system being developed is supposed to verify the "smartcard" of the card holder and his/her fingerprints against the Defense Department database. The system also reads in information about people (facial features, height, weight, etc.) and stores the information in the database, and then issues new "smartcard".
1. People involved in the project already decided to use swing for the client tier.
2. The problem is the Defense Department database. It is a flat file database and this database cannot be touched. It is a black box for Java developers. The Defense Department may provide a jar as an outer layer of this database.
Question 1: Is the web tier essential for this defense project?
Question 2: What is the proper J2EE architect for this project?
Question 3: How to deal with the data problem? Especially it looks that entity beans are not applicable.
Question 4: How does the system handle very heavy load? It is possible that tens of thousands of people will use the system at the same time.

A brief description of a national defense project I am
looking into is that the system being developed is
supposed to verify the "smartcard" of the card holder
and his/her fingerprints against the Defense
Department database. The system also reads in
information about people (facial features, height,
weight, etc.) and stores the information in the
database, and then issues new "smartcard".
1. People involved in the project already decided to
use swing for the client tier.
2. The problem is the Defense Department database. It
is a flat file database and this database cannot be
touched. It is a black box for Java developers. The
Defense Department may provide a jar as an outer layer
of this database.
Question 1: Is the web tier essential for this defense
project?
Question 2: What is the proper J2EE architect for this
project?
Question 3: How to deal with the data problem?
Especially it looks that entity beans are not
applicable.
Question 4: How does the system handle very heavy
load? It is possible that tens of thousands of people
will use the system at the same time.
Hi,
You can get it done here :http://www.thesoftwareobjects.com

What is the proper AppleCare part number...

Similar Messages

Maybe you are looking for