What is the proper setup in BIOS when using promise raid controller

I am using the k7n2g-islr board and using the on-board promise controller.  Everything has been working ok, but all of a sudden I get a "disk read error".  THe Promise Bios picks up both my drives (one is serial ATA, the other IDE), so I don't think the hardware has failed (completely anyway).  So, in the main BIOS it doesn't pick up any drives there with autodetect.  So...my question is twofold.  First, should the main BIOS be picking up a drive or not?  Second, what should the boot sequence be to boot of the promise controller (i.e. HDD-0 or SCSI?).
THanks in advance.
Dave
k7n2g-islr
160GB Serial ATA (Boot)
120GB IDE (secondary)
WinXP

The main bios page will not show any sata/scsi drives.....only ide drives....as for booting the first boot option should be either sata, or scsi...if that is the drive the os is on.

Similar Messages

  • What is the proper way to demote a Win 2003 Domain Controller running SQL Server 2008 WorkGroup Edition?

    Hi, 
    What is the proper way to demote a Windows 2003 Domain Controller running SQL Server 2008 WorkGroup Edition? 
    I will be migrating AD from Win 2003 to 2012....
    Thanks in advanced. 

    Running SQL on a domain controller is highly not recommended for performance reasons and for complexities it introduces in the management of both systems (You are already facing this situation now).
    I would recommend proceeding like the following before demoting your domain controller:
    Install a new SQL server on a member server
    Migrate your databases to the new SQL server
    Once done, you can safely demote your DC.
    More if you ask them here: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=sqlserver
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • What is the proper setup for Gmail on iOS

    I have been struggling with this since I made the switch to iPhone in November.   I use gmail and would like my emails to be sent from my own domain.   Exchange no longer works.  Any help is appreciated

    Google stopped supporting their version of Exchange (ActiveSync) unless you have a premium GMail account.
    The "proper" setup depends on your preferences and needs.
    You can use the standard iOS profile to set up your GMail account using the standard iOS Mail app, or use the GMail app.  The GMail app supports Push, the standard iOS GMail does not.
    If you want your Google contacts to be available on your iPhone, the GMail app will pull a contact into a new message without the contacts actually being installed in your iOS Contacts app, but of course they won't be available for any other purpose.  The standard iOS profile for GMail does not let you sync your Google contacts, so the best route is to set up your Google contacts as a CardDAV account:
    http://support.apple.com/kb/HT4872?viewlocale=en_US
    This is done as an additional account to your iOS GMail account (or just set up contacts only and use the GMail app).
    The GMail app does not provide Calendar or Notes support, only the iOS GMail profile does.
    Personally I use the standard iOS GMail account for Mail, Calendar, and Notes, and set up a separate CardDAV account to sync my Google contacts.  I'm OK with not having Push support for mail, there are more important things to fret over.

  • What is the type of backup file when using ovi sui...

    Hi there....
    Where is the backup file usually stored when using ovi suite??
    what is the type of the file when i want to search in windows viasta???
    THANK YOU
    Solved!
    Go to Solution.

    The backup file will have a ".nbu" file extension. You can view (and edit) the default saving location by going to Tools>Options>My devices.
    Attachments:
    ovi_suite_backup.jpg ‏93 KB

  • What are the possible LdapException.ErrorCode values when using System.DirectoryServices.Protocols?

    When making Ldap calls using the System.DirectoryServices.Protocols Namespace classes and a request generates an LdapException the ErrorCode property contains a numeric value describing the error. However, I cannot find any documentation describing what
    the possible error codes are and what they mean. Is this documented somewhere?
    Thank you.
    -Dave Herrmann

    That should be the error code returned by the ldap_* native functions:
    https://msdn.microsoft.com/en-us/library/aa367014(v=vs.85).aspx

  • What is the speed of data transmission when using Data Dashboard?

    Hello, everybody, I've seen that doesn't matter if an iphone or a chinese tablet is used, the speed  of data transmission with Shared Variables and Data Dashboard is almost the same, and is low speed. Does anybody know how could I measure this speed of transmission? Thank you in advance.
    Impossible is nothing
    Solved!
    Go to Solution.

    Hello there;
    The update rate of the Data Dashboard for 1.0 is fixed  1 second for webservices and 0.2 seconds for network shared variables, depending of course on how much information is streaming on the network . On the second version of Data DAshboard you can specify your update rate within a range
    You can find that info in this KB
    Hope this info helps.
    Cheers

  • What is the proper vehicle power adapter to use with the hp 2000-2a28dx notebook?

    I would like to buy a vehicle power adapter for my HP 2000-2A28DX notebook, preferably by part number, voltage, and wattage.

    I found 2
    http://www.shopping.hp.com/en_US/home-office/-/products/Accessories/AC-Adapters/ER691AA?HP-90W-Noteb...
    http://www.shopping.hp.com/en_US/home-office/-/products/Accessories/AC-Adapters/KS474AA?HP-90W-Smart...

  • What is the proper config for the Airport Extreme when a Voice over IP device is between the cable modem and the router.

    What is the proper config for the Airport Extreme when a Voice over IP device is between the cable modem and the router.  Its a VoIPo device. The cable modem is connected to the VoIP WAN port and the LAN port on the device feeds the Airport Extreme.  The VOIP is working fine, and my Mac are getting 10. addresses from the Airport Extreme.  But I do get confict messages and lose my connection periodicaly.  Looking for help.

    Its a VoIPo device.
    Per chance, is this device the Grandstream HT502?

  • I use photo stills in my iMovie. I want them to last longer than a minute, but when I input 01: 45: 00, to signify one min. and 45 seconds, it doesn't accept it. What is the proper format for inputting minutes?

    I use photo stills in my iMovie. I want them to last longer than a minute, but when I input 1:45:00, to signify one minute and 45 seconds, it doesn't accept it. What's the proper way to input it?

    There are 30 frames in one second of video. So you can specify down to the frame level, which is 1/30th of a second.
    Is the Duration box switching to some other time every time you type in 1:45:00?
    For instance this is a 5 second clip plus 3 frames. To get this set properly I would type in 1:45:00, then click done. I don't know if it is different under older versions of iMovie, as I'm using iMovie '11 for thisi example.

  • What Are The Proper Settings In Audio/MIDI Setup?

    In the Audio Input, Line In, what is the proper setting for Hz? 44100, 48, 96, And should the 2ch be 16bit, 20bit or 24 bit? Right now I'm using an older gray iMic as the Audio in
    Thanks

    Steve B5 wrote:
    what is the proper setting for Hz?
    44100
    And should the 2ch be 16bit, 20bit or 24 bit?
    16 is standard, 24-bit (new to GB4) is the highest resolution

  • How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

    How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

    "Method Three
    Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
    This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
    I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

  • What's the proper way of mixing voices on top of loud music?

    Hello!
    I'm working on a little something that contains very loud music and very loud voices mixed together.
    It sounds great on my Logitech G35 headphones, but when playing it through my studio monitors in the living room, the voices seem to get a little drowned out by the music (The music is at a pleasingly loud level that I wish to keep, as it doesn't sound as powerful as soon as I bring it's gain down a little).
    So I was wondering what is the proper way of keeping the great loudness of the music and the voices at the same time, but make the voices a little more understandable?
    The music and the voices are on seperate tracks of course in my Audition file.
    Here is an example of what it sounds like currently: http://soundcloud.com/stefanpanic/gameshow-trailer
    Thanks in advance!

    Okay, with my acoustician's hat on:
    Headphone mixing - especially when it comes to voices in the centre of a stereo field - has always been a disaster area, and you can almost always spot when a mix has been made to play on headphones, because the vocal is invariably too quiet.
    I suppose that the easiest way to explain this is to consider what happens to the central voice with loudspeakers. That voice is essentially a virtual image; there isn't a loudspeaker there to support it. So it's been created out of the off-axis responses of your loudspeakers, and is in a space that's quite a distance from your ears, compared to where it would be on headphones. So, the level of this voice depends as much on the angle of your speakers as anything, and whilst this varies considerably between different setups, it's still considerably different to the relationship that headphones have with your ears!
    Traditionally in the past, it's been recommended that you should sit in an equilateral triangle with your speakers, which should be pointing towards you which means an included angle of 120 degrees between them. Despite this information being repeated all over the place since the 1950's, there's no physical basis for it at all, and most people don't have setups like that anyway. And I have to say that this really isn't good positioning for establishing a central image - that angle is too great, and you are relying on an extremely good off-axis response to achieve any level at all there.
    In this day and age, what you really need is a monitoring compromise that will let you create a mix that sounds not so bad on both headphones and loudspeakers, and there are a couple of things you can do to improve the situation considerably, and get a generally better result. And FWIW, it's what I do in this situation...
    The first is to alter the angle of your monitors so that the included angle is 90 degrees (a right-angle) and sit so that both of them are pointing directly at your ears. This gets you a lot closer to the monitors, admittedly, but is far more realistic as far as a compromise mix is concerned. If you do your whole mix like this, you'll find that it's a lot easier to position things in it too. And don't put anything like soft furnishings between them either - that will definitely make things worse. The second thing is that one of the important things you should always do with a mix like this, to finally establish vocal levels, is to listen to it really quietly. No, really quietly! Almost at vanishing point. What you should hear is the whole mix, but if anything is standing out (like the vocal), it will become obvious like this in a way that it simply won't when it's louder. You want it to be there, certainly - but it shouldn't be either missing or standing out too much.

  • What is the proper way to record line numbers in Master/Detail records?

    Guys and Gals,
    Been thinking about this for awhile, but thought it best to ask the people who really know what they are doing.
    What is the proper way to record & show line numbers in a Master / Detail record set?
    For example, take Master/Detail relationship Orders and OrderItems. Orders has a column Document_Number and OrderItems has Document_Number, Line_Number. Line_Number should contain the row number 1,2,3,4 ... etc. for each row in a document.
    Should I ...
    <ol><li>Add a sequence and a trigger in the database? The FusionOrderDemo does this, but then the sequence never "resets" and I've got row numbers that keep incrementing. So one document has rows 4,5,6 and the next document has 7,8,9 when they should both have 1,2,3.</li>
    <li>Programmatically take care of the row numbers? This seems like I'm asking for trouble. Anytime an insert or delete operation gets done, I'll have to iterate through rows and re-assign row numbers.</li>
    <li>Is there a way to assign row numbers in a table iterator (or data collection?) to an entity?</li></ol>
    Any suggestions would be appreciated. It's looking like #2 is my only option, but if anyone knows different I'd love the input.
    Will

    Thank you both guys.
    As John said, I believe I'm looking for a gap-free sequence per master record.
    The line number of the OrderItems table is the second half of the primary key. The first half of the primary key (DocumentNumber) is the foreign key to the Orders table.
    Think of it like line items on an order or invoice. For example, if you were talking to someone on the phone concerning an invoice, you might say, "The pricing for line item #3 is incorrect." In this case, it's good to have a common reference. Or imagine a Microsoft Excel spreadsheet with no row numbers displayed! You'd never get anywhere if you had to explain something over the phone.
    If this is tricky to perform, I take it using a sequence and trigger such as the Fusion Order Demo is the best way to approach the challenge for simplicity's sake?
    Will

  • What is the proper way to close all open sessions of a NI PXI-4110 for a given Device alias?

    I've found that, when programming the NI PXI-4110 that, if a the VI "niDCPower Initialize With Channels VI" (NI-DCPower pallette) is called with a device
    alias that all ready has one or more sessions open (due to an abort or other programming error) a device reference results from the reference out that has a (*) where "*" is post-fixed to the device reference where and is an integer starting that increments with each initialize call. In my clean up, I would like to close all open sessions. For example, let's said the device alias is "NIPower_1" in NI Max, and there are 5 open sessions; NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4). A simple initialize or reset (using niDCPower Initialize With Channels VI, or, niDCPower Initialize With Channels VI, etc.) What is the proper way to close all open sessions?
    Thanks in advance. Been struggleing with this for days!

    When you Initialize a session to a device that already has a session open, NI-DCPower closes the previous session and returns a new one. You can verify this very easily: try to use the first session after the second session was opened.
    Unfortunately, there is a small leak and that is what you encountered: the previous session remains registered with LabVIEW, since we unregister inside the Close VI and this was never called. So the name of the session still shows in the control like you noted: NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4), etc.
    There may be a way to iterate over the registered sessions, but I couldn't find it. However, you can unregister them by calling "IVI Delete Session". Look for it inside "niDCPower Close.vi". If you don't have the list of open sessions, but you have the device name, then you can just append (1), (2) and so forth and call "IVI Delete Session" in a loop. There's no problem calling it on sessions that were never added.
    However - I consider all this a hack. What you should do is write code that does not leak sessions. Anything you open, you should close. If you find yourself in a situation where there are a lot of leaked sessions during development, relaunching LabVIEW will clear it out. If relaunching LabVIEW is too much of an annoyance, then write a VI that does what I described above and run it when needed. You can even make it "smarter" by getting the names of all the NI-DCPower devices in your system using the System Configuration or niModInst APIs.
    Hope this helps.
    Marcos Kirsch
    Principal Software Engineer
    Core Modular Instruments Software
    National Instruments

  • What's the proper protocol for a reset on my ipod touch 4g?  iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.

    What's the proper protocol for a reset on my ipod touch 4g?  iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.
    It's a 64G ipod touch and was fine till Apple told me to upgrade to ios 6.  Now most of my apps crash, my music won't play and I just get a white screen when I hit Music.
    When I try to sync to itunes it acts like it's going to sync and appears to recognize the ipod, but it's grayed out and has an update circle by it that spins for a while until itunes eventually freezes alltogether.  Is there a  way to go back to ios 5 after a erase and reset?

    iOS: Unable to update or restore

Maybe you are looking for