What is the Proper Way to "Sync My Music & Apps to a New Computer Using ITunes"

What is the Proper Way for Me to "Sync My Music, Pictures & Apps to a New Computer Using ITunes"?
I had to buy a New Computer since my other one went out, but when I log into ITunes with the New Computer using My Apple ID "Nothing is there"...
None of My Previously Purchased Music or Apps are in My ITunes Media Library; so, I any not sure how to Properly Proceed with Syncing?
Any Help & Guidance would be Greatly Appreciated!!!
Thanks,
Don

Sounds like something might be wrong there. Years ago I set up the playlists to sync to my iPhone and 'Everything' for my iPod and I've never needed to change or even check it since, ever.
However, how and why are you 'restoring' the iPod? This is not something you should ever need to do. If you restore back to original settings, then I guess that would throw away your own settings, but as I said, there should be no need to keep doing that. Or at all in fact.

Similar Messages

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

I own a MacBook Pro laptop, an iPhone5 and an iPad mini with an itunes/apple account. I just added an iphone5 for my wife. What is the best way to sync shared music, ical, etc.?

I own a MacBook Pro laptop, an iPhone5 and an iPad mini with an itunes and apple account. I just purchased another iphone5 for my wife. What is the best way to sync and share iTunes music, iCal dates on her phone and my computer and devices? We don't need to sync and share contacts.

Jordans374 wrote:
Both are already synced to a windows laptop?
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

What's the best way to move library in Windows to a new computer?

I have iTunes running fine on my Vista machine at home. I've gotten Win7 in, and I'm going to be moving to a new computer I have which I'm upgrading from XP to 7 with (it's got more horsepower than my Vista machine).
Anyway, to that, I want to move all my stuff from my current Vista machine to the 7 machine, ioncluding iTunes. What's the easiest way to do this - and maintain all my stuff, like ratings, number of times played, playlists, etc...
I've read some helps, and none of them seem concerned about keeping number of times played, and all that. You can't just up and move the files, as the directory path will be different, so the itunes data file won't see them if you copy that, too.
Suggestions?

The first thing to do is to ensure that your music is all together in the iTunes music folder. If you have tracks else where you need to consolidate your library.
Then install iTunes on the new PC but don't add any music.
With iTunes closed, drag the iTunes folder out of Music on the new PC to the desktop.
Then with iTunes closed on both PCs you need to copy The iTunes folder from the old PC to the Music fodler on the new PC so that it replaces the one you dragged out.
It doesn't really matter how you achieve the copying - network or via an external drive.
The last thing you need to do is to check the permissions on the iTunes folder you copied to the new PC, your account needs full control.
Vista file folder permissions help
http://windowshelp.microsoft.com/Windows/en-US/Help/2464a180-e5dc-45d1-a2b8-3c8a 2b571e9d1033.mspx
http://www.mydigitallife.info/2007/05/25/how-to-take-ownership-and-grant-permiss ions-in-windows-vista/
for interest here is a description of how to transfer using an iPod to do the transfer:
http://support.apple.com/kb/HT1329?viewlocale=en_US

What is the best way to sync my music?

I use iTunes for more than just my iPod music, I use it for ALL of my music. Therefore, I don't want to put all of my iTunes music on my iPod. When syncing, I get two options, and I choose "Selected playlists....." However, this is getting REALLY annoying to have to select my music every time I restore my iPod for various reasons. Is there something I'm missing, or is iTunes really as stupid as I think it is?

Sounds like something might be wrong there. Years ago I set up the playlists to sync to my iPhone and 'Everything' for my iPod and I've never needed to change or even check it since, ever.
However, how and why are you 'restoring' the iPod? This is not something you should ever need to do. If you restore back to original settings, then I guess that would throw away your own settings, but as I said, there should be no need to keep doing that. Or at all in fact.

What's the proper way to charge my iPod?

What's the proper way to charge my iPod? I am confused because some people say that the ipod fast charges for up to 80% in 2 Hours and full charges up to 100% for the next 2 Hours, 4 Hours total. Now, i sync my iPod on the PC and charges it up to 2 Hours and the indicator on my iPod and iTunes already displayes the "PLUG" icon on the battery. Here's the part where i'm confused, how am i supposed to charge my iPod up to 100%/4 Hours if it will already be full w/in 2 Hours? Is it normal? :/

Lithium ion batteries don't require much special handling. Charge them when ever you want. You don't have to wait until they discharge completely. In fact, the one thing you really shouldn't do with a lithium ion battery is drain it completely and let it sit that way.
Best of luck.

What is the proper way to record line numbers in Master/Detail records?

Guys and Gals,
Been thinking about this for awhile, but thought it best to ask the people who really know what they are doing.
What is the proper way to record & show line numbers in a Master / Detail record set?
For example, take Master/Detail relationship Orders and OrderItems. Orders has a column Document_Number and OrderItems has Document_Number, Line_Number. Line_Number should contain the row number 1,2,3,4 ... etc. for each row in a document.
Should I ...
<ol><li>Add a sequence and a trigger in the database? The FusionOrderDemo does this, but then the sequence never "resets" and I've got row numbers that keep incrementing. So one document has rows 4,5,6 and the next document has 7,8,9 when they should both have 1,2,3.</li>
<li>Programmatically take care of the row numbers? This seems like I'm asking for trouble. Anytime an insert or delete operation gets done, I'll have to iterate through rows and re-assign row numbers.</li>
<li>Is there a way to assign row numbers in a table iterator (or data collection?) to an entity?</li></ol>
Any suggestions would be appreciated. It's looking like #2 is my only option, but if anyone knows different I'd love the input.
Will

Thank you both guys.
As John said, I believe I'm looking for a gap-free sequence per master record.
The line number of the OrderItems table is the second half of the primary key. The first half of the primary key (DocumentNumber) is the foreign key to the Orders table.
Think of it like line items on an order or invoice. For example, if you were talking to someone on the phone concerning an invoice, you might say, "The pricing for line item #3 is incorrect." In this case, it's good to have a common reference. Or imagine a Microsoft Excel spreadsheet with no row numbers displayed! You'd never get anywhere if you had to explain something over the phone.
If this is tricky to perform, I take it using a sequence and trigger such as the Fusion Order Demo is the best way to approach the challenge for simplicity's sake?
Will

What is the proper way to close all open sessions of a NI PXI-4110 for a given Device alias?

I've found that, when programming the NI PXI-4110 that, if a the VI "niDCPower Initialize With Channels VI" (NI-DCPower pallette) is called with a device
alias that all ready has one or more sessions open (due to an abort or other programming error) a device reference results from the reference out that has a (*) where "*" is post-fixed to the device reference where and is an integer starting that increments with each initialize call. In my clean up, I would like to close all open sessions. For example, let's said the device alias is "NIPower_1" in NI Max, and there are 5 open sessions; NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4). A simple initialize or reset (using niDCPower Initialize With Channels VI, or, niDCPower Initialize With Channels VI, etc.) What is the proper way to close all open sessions?
Thanks in advance. Been struggleing with this for days!

When you Initialize a session to a device that already has a session open, NI-DCPower closes the previous session and returns a new one. You can verify this very easily: try to use the first session after the second session was opened.
Unfortunately, there is a small leak and that is what you encountered: the previous session remains registered with LabVIEW, since we unregister inside the Close VI and this was never called. So the name of the session still shows in the control like you noted: NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4), etc.
There may be a way to iterate over the registered sessions, but I couldn't find it. However, you can unregister them by calling "IVI Delete Session". Look for it inside "niDCPower Close.vi". If you don't have the list of open sessions, but you have the device name, then you can just append (1), (2) and so forth and call "IVI Delete Session" in a loop. There's no problem calling it on sessions that were never added.
However - I consider all this a hack. What you should do is write code that does not leak sessions. Anything you open, you should close. If you find yourself in a situation where there are a lot of leaked sessions during development, relaunching LabVIEW will clear it out. If relaunching LabVIEW is too much of an annoyance, then write a VI that does what I described above and run it when needed. You can even make it "smarter" by getting the names of all the NI-DCPower devices in your system using the System Configuration or niModInst APIs.
Hope this helps.
Marcos Kirsch
Principal Software Engineer
Core Modular Instruments Software
National Instruments

What is the best way to sync multiple collections of contacts among multiple users?

(I originally submitted this question under the "Mac OS X Technologies" section, but got no response. I'm submitting a duplicate here because this is where all the smart folks are! My apologies that my question is only partially related to OS X Server . . . )
What is the best way to sync multiple collections of contacts among multiple users on iOS and OS X?
For example, suppose I have three collections of contacts: Bob's, Sally's, and Common. I want Bob to be able to access and sync Bob's contacts and Common contacts, and Sally to access and sync Sally's contacts and Common contacts. Bob and Sally never need to access or sync each other's contacts. Bob and Sally would both sync and share contacts in Common.
How would I best implement this? It's my understanding I have three options for managing contacts across iOS and OS X: 1. iCloud accounts, 2. Install OS X server, or 3. Install and manage Darwin CardDAV directly. Which method would best support what I wish to do?
I am a seasoned Unix geek well versed in the terminal, so I am prepared to get my hands dirty as much as necessary to achieve what I want. Also, it is sufficient if syncing takes place over WiFi on the local network, in fact, that is desirable versus syncing over the cloud.

Thanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this.

What is the proper way to charge battery in 2012 15 inch macbook pro.

what is the proper way to charge the battery and make it last longest

About Batteries in Modern Apple Laptops
Battery University
Apple - Batteries - Notebooks
Apple - Batteries
Extending the Life of Your Laptop Battery
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Apple Portables- Calibrating your computer's battery for best performance
Mac notebooks- Determining battery cycle count

What is the proper way to create a monotone image with real looking contrast?

Once I apply a color to my previously created black and white image everything looks washed out.
I have an artwork with 3D representation of the letterforms, casting shadows on the textured surface. Shadows are deep black. I need this artwork to be colored in gold. My client forwarded me the specs for the metallic gold which he got from the PANTONE. They are:Gold (871); Adobe 1998 RGB: 126-113-76
HSB*: 44 degrees-40%-50%
What is the proper way of applying those values to the desired image.
My idea was to make the image black and white and than create a monotone image with the above specs. In this case the image gets washed out as the darkest black in the shadows becomes this Pantone gold. Is there any other way?

A duotone will work, however you are going to want to work closely with your printer . Most printers will want the second color in CMYK (Possibly C60 M40 Y0 K100 instead of RGB values or specify a Pantone Rich Black (I personally like 6C)but it will cost you more for the wash up of both heads of the printer...
Go to Image>Mode>Duotone (image must be greyscale first for this to work) then add the desired colors to your ink scales.

What is the proper way to include search terms in your page

Say you have a web page that is about a certain topic and has information displayed on the page. What is the proper way to include terms that you would like this page to show up on a search for but don't necessarily want to display on the page?
I didn't know if including the search keywords at the bottom in small font with invisible color was the proper way.

I didn't know if including the search keywords at the bottom in small font with invisible color was the proper way.
ABSOLUTELY NOT!!! This practice will get your site banned or blacklisted from Search Engines. It is considered a Black Hat tactic to attempt to mislead search engine results in an effort to drive traffic to your site.
Instead, use plenty of keyword rich, relevant text and good semantic mark-up (h1, h2, h3) inside the body of your pages. In time, search engines will find you.
Some Excellent Links on Search Engine Optimization:
Google's SEO Starter Guide (PDF)
http://www.google.com/webmasters/docs/search-engine-optimization-starter-guide.pdf.
Can Better Web Accessibility Mean Better Search Ranking?
http://alt-web.blogspot.com/2007/07/can-better-web-accessibility-mean.html
High Rankings Advisor
http://www.highrankings.com/newsletter/
SEOMoz.org - Beginner's Guide to SEO (1-page html)
http://www.seomoz.org/article/beginners-1-page
SEO Chat
http://www.seochat.com/
Submit Site Maps to 4 Major Search Engines
http://alt-web.blogspot.com/2008/11/submit-sitemaps-to-4-major-search.html
Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
www.twitter.com/altweb
www.alt-web.blogspot.com/

What is the best way to sync Address Book contacts?

Please help!
I run a small Mac network and I need to sync all (we have 8 Macs) the Mac's Address Book's with each other and also with 5 different iPhones. We have a Mac Server running Tiger and all the Macs are running Tiger. 4 of the Macs are Intel. The server is PowerPC.
At the moment I am just using 1 .Mac account to sync to them all, but this is causing many problems with duplications, errors and 'stress!'
The reason for the above setup is money. But, as the problems continue and the syncing become more important, money is now allowed to be spent.
My question really is, as the subject header says, 'What is the best way to sync Address Book contacts?' In the past I have tried XC Connect, and a few other apps, but with the introduction of the iPhones, the setup has become more complex.
If I were to buy all new Intel Macs and an Intel Mac Server all running Snow Leopard, would the 'Address Book Server' do the job? I have found very little information on the net and the information I did find was all negative.
Is there something Leopard can do that Tiger can't? Is Tiger nolonger a good enough system to try and run an Address Book network?
Does anybody else out there in the Mac world have a similar setup to mine, and if so, how do you have your setup.
Incidentally, ALL users, incuding iPhone users, need read & write access to the Address Book!!
Any solutions or suggestions would be most welcome.
Thanks in advance
col_t

Oh, I meant Leopard does do more than Tiger Server.
I don't know enough about Server, even less abut Syncing.
SL is to new, not enough time to iron out the kinks yet imho.
One day SL will be better than Leo, but...
I'd ask over in server...
http://discussions.apple.com/category.jspa?categoryID=96
Or perhaps Collaboration Services...
http://discussions.apple.com/forum.jspa?forumID=1352
They may even have a different opinion on SL.

Gave grandkids Ipads for Christmas. I need to sync each to my Mac with their own Itune accounts. I do have them on my computer with their own login. What is the best way to sync their Ipads?

I need to sync each of my grandkids IPads to my Mac with their own Itune accounts. Each grandkid does have a login on my computer that I control. On their IPads they each set up a ITune account. What is the best way to sync their Ipads? Is there something I need to make sure is turned on in their accounts on my computer?

Hi Jodel,
Thanks for visiting Apple Support Communities.
If your grandkids each have a user account on your Mac, you can use the steps in this article to set up syncing with each user account and iPad:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
You may also find the advice in this article useful:
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Regards,
Jeremy

Using Microsoft Exchange to access Gmail (Google Apps for Business) contacts, what is the best way to sync the Corporate Directory?

Using Microsoft Exchange to access Gmail (Google Apps for Business) contacts, what is the best way to sync the Corporate Directory? For instance, we have 40 staff members and wish to populate each phone with the Gmail profile. Right now we have a third party Android app that does this and copies my contacts to each phone. This is problematic. Any solutions to populate a phone with email and phone contacts? Even it it requires double entry for me...thats ok.

Oh, I meant Leopard does do more than Tiger Server.
I don't know enough about Server, even less abut Syncing.
SL is to new, not enough time to iron out the kinks yet imho.
One day SL will be better than Leo, but...
I'd ask over in server...
http://discussions.apple.com/category.jspa?categoryID=96
Or perhaps Collaboration Services...
http://discussions.apple.com/forum.jspa?forumID=1352
They may even have a different opinion on SL.

What is the Proper Way to "Sync My Music & Apps to a New Computer Using ITunes"

Similar Messages

Maybe you are looking for