What is the RAM disk?

Sorry for the basic question, but:
I'm following Apple's steps to get my iBook G4 to eject a stuck CD. In the instructions to reset the PRAM, it says:
Warning: Resetting the Power Manager on any PowerBook or iBook will permanently remove a RAM disk, if present, and all of its contents.
That doesn't mean it will erase my hard drive, does it? Not sure what a RAM disk is.
thanks,
david

That doesn't mean it will erase my hard drive, does it?
It won't.
Not sure what a RAM disk is.
The RAM disk is a Mac OS 9 feature that enables part of the computer's RAM to be used as if it was an external drive or disk image. Unless you've used third-party software in Mac OS X to create one, you won't have it.
(33633)

Similar Messages

  • What is the RAM limit in a macbook pro 2.33ghz intel core 2 duo.?

    Hello
    I have a macbook pro 2.33 ghz intel core 2 duo with
    2 GB 667 MHZ DDR2 SDRAM
    What is the RAM limit i can install? 3GB or 4GB?, how do i know that? I dont have the manual.
    thank you
    Leo.

    What is the RAM limit in a macbook pro 2.33ghz intel core 2 duo.?
    3GB. You can install 4GB. The computer will only utilize approximately 3.3GB though.
    http://www.everymac.com/systems/apple/macbook_pro/stats/macbook-pro-core-2-duo-2 .33-15-specs.html
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • What is the best disk cleanup program to use for my macbook pro?

    what is the best disk cleanup program to use for my macbook pro? i've heard about MacKeeper but i dont want to risk downloading anything that might harm my computer. i just need excess files & such cleared and my computer harddrive cleaned up!

    DO NOT USE MACKEEPER! If you feel you must have a "cleaner" try ONYX                                                                                                                          www.macupdate.com/app/mac/11582
    https://discussions.apple.com/docs/DOC-3353
    Credits to ds store.

  • What's the RAM of ipad air and ipad mini with Retina display?

    What's the RAM of ipad air and ipad mini with Retina display?

    Both use the Apple A7 CPU at 1.3GHz. RAM is not yet known.
    iPad Air Technical Specs
    iPad Mini with Retina Technical Specs
    iPad Air (Wikipedia)
    iPad Mini with Retina (Wikipedia)
    Apple A7 Chip
    Apple M7 Chip

  • What does the recovery disk assistant store?

    hello everyone, my questions:
    1.what does the recovery disk assistant store?
    2.is it necessary to use the recovery disk assistant often or is it enough to use once.
    thanks
    Fatih.

    As it said in the link I posted:
    has same capabilities as the built-in Lion Recovery: reinstall Lion, repair the disk using Disk Utility, restore from a Time Machine backup, or browse the web with Safari. This drive can be used in the event you cannot start your computer with the built-in Recovery HD, or you have replaced the hard drive with a new one that does not have Mac OS X installed.
    And here it is explained further:
    http://support.apple.com/kb/HT4718
    It stores some tools (Disk Utility) to repair your drive and lets you connect to the app store to re-download the OS or restore it from a Time Machine backup. That's it.
    And it will re-install or restore your system (OS), it will not touch your files. However,
    NOTE: before doing anything like that, it is wise to have a complete backup - things can happen.

  • What does the startup Disk do ?

    i'm a new mac user, and i still don't know what all the option on the mac does, one of those is the startup disk
    i really like to know what does the startup disk do .
    thank you

    The hard drive would need to be formatted properly and have a valid operating system on it.
    For example, if your computer shipped with OS X 10.6 (Snow Leopard), the external hard drive would have to be formatted correctly and have Snow Leopard installed on it. Once the installation is completed, the drive should be bootable.
    ~Lyssa

  • HT3275 What does "The backup disk image "/Volumes/Data/apple's iMac.sparsebundle" is already in use.

    My back up is no longer working.  The errors that come up are "The backup disk image “/Volumes/Data/apple’s iMac.sparsebundle” is already in use."  Does anyone know what this means?

    It means that there are bugs in the operating system.
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Report back if you need further assistance

  • What does the "Other" disk category in iTunes for iOS devices consist of?

    I have searched everywhere for an "official" Apple response as to what the "Other" disk category in iTunes for iPads/iPod Tocuhes consists and have not found one.
    Apple, can you please answer?
    I have multiple devices that contain the Other usage ranging anywhere from 1gb ~ 5gb and I'd like to know what it is.
    Thx!

    These are user-to-user forums, they are not monitored by Apple.
    'Other' contains things such as Safari's cache and cookies, notes, contacts, downloaded emails (and their attachments), and the content of third-party apps. Unless you have, for example, newspaper/magazine apps and/or third-party music or video apps (or other third-party apps with large content) then 1 to 5 gig sounds like too much and you might have some corrupt files.
    Have you tried syncing with you computer to see if that reduces it, and/or a reset (press and hold both the sleep and home buttons for about 10 to 15 seconds ignoring the red slider, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot). Or you could try restoring to your last backup or back to new.

  • HT4522 what is the preferred disk erase mode for Time Capsule

    I've been wanting to re-format my Time capsule as I've bought a new Mac Book and currently have 2 backups loaded. Since I've merged data, I wanted to erase and re-use the TC.
    Can someone tell me what the preferred disk erase mode is for TC.

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit
    Click the Disks tab at the top of the next window
    Click Erase Disk
    You will be presented with several Erase options.....Quick Erase, Zero Out, 7 Pass, etc.
    Quick Erase will only take a minute or two and be fine for your purpose since you are keeping the Time Capsule.
    If you were moving the Time Capsule to another user, the Zero Out option will replace everything on the drive with zeroes. This will take 3-5 hours depending on the size of drive that you have in the Time Capsule.
    7 Pass zeros the drive 7 times, etc.
    BTW, the Time Capsule drive is formatted in Mac OS Extended (Journaled). This cannot be changed unless you pull the drive from the Time Capsule (voids the warranty), place it in a separate enclosure and use Disk Utility to make the changes that you want.
    Then, you have to reinstall the disk back in the Time Capsule.

  • What does the installatin disk for the 30 inch LCD do?

    I bought a 30 inch ACD this week and used it for 3 days happily when I noticed that there was an installation CD. The manual said that I should install the software on it, though I have no idea why I need to install it or what it does, and even though my Macbook Pro seemed to be working with the ACD just fine. Does anyone know?

    The purpose of the installation disk is to enable all of the features of the display; it should only be used if the CD includes newer software than what is present on your hard disk, and it probably isn't applicable to your configuration.
    (16219)

  • What is the RAM specs on ipad2 and iphone 4s?

    Anybody know what the RAM specs are on these devices?

    According to reports from other sources (Apple does not announce this officially) the RAM is 512 MB on both devices.
    http://www.appleinsider.com/articles/11/03/03/apples_a5_cpu_in_ipad_2_has_512mb_ of_ram_same_as_iphone_4_report.html

  • What is the startup disk

    my mac gives me the message that the startup disk is almost full, what can i do?

    You may find this Link helpful...
    http://macmost.com/what-to-do-when-your-hard-drive-is-full.html

  • What do the Ram timings mean and does it matter which SATA port?

    hi
    is it a thread or could you guys add 1. i just bought 2x p55a- gd65 mobos. im sorry i do not build pc's all the time. i buy every few years and try to get up to date tech..
    my problem is. each new tech i go up say kn8 to an9 ddr to ddr2 etc. some of the wording in memory set up changes and or more setting options. im not sure what the 4 main settings are. say i have memory that is 8-8-8-24 and want to make it 9-9-9-24. im not sure exactly which settings to change.. i think 1 settings has cl in the wording- i know what cl is- im not sure of the others.. this lil bit of info added to the manual would help us simple folks a lot..
    well maybe you guys could start another thread- maybe you can sticky them. or put all of this in a general new p55 build thread.. but.
    i noticed in the manual for my 2 new p55a- gd65 and or on the mobo. the satas are stacked 2 in a stack which one is sata 1 and sata 2. its not clear in the manual. i want to guess sata 1 is the 1 closest to the mobo or pcb and 2 is on top.. i have not checked yet. but what about the io plate and say usb. i guess some of them are stacked and maybe a few of them. which is stack 1 or usb 1 and 2 etc. again id guess the 1 closest to the mobo is 1. but what about if it is a few different stacks. where would the count start from top of mobo or the bottom up.. lil things like this can snag us simple folks. but in less than 1/3 of a page in the manual for these issues could be explained with ease or by adding a few numbers to the photos etc. if i remember right my abit mobos always added the lil numbers what ever to the system photos or drawings. it helped to set up the system faster and helped even more us that do not build systems often.. we should not have to guess- a few simple lil numbers on the drawings would be sweet.
    thank you if you guys could start a thread and answer these few things- i know it would help me a lot. i will have the rest of my 2 system builds by the end of the week.. i was just reading on the msi flash drive thingy- its seems cool. as long as my drives like it etc- i have 1x 512mb 1x 1g and 1x 2g drives. im not sure how much space it needs exactly. im not sure it said anything about that. it just said- make sure you have extra space- but not how much? i want to guess my 1 gig drive will be enough. i have to make sure i know what letter it will be called etc.. but i think i will be ok.. i more want to use memtest- i hope my bios will be up to date- or good enough to get it running- but i will check and see what is out and download it maybe burn it to disc etc.. i have a few days to get all of this together..
    * mods feel free to move this post if need be. i started this post here because its memory related or part of it anyway.. im not sure it is threads for these lil things- maybe sticky s in another area. im not trying to take over the thread or anything. im new here..
    thanks in advance.. see ya..

    The timing explanations are all over the net.  For instance, at techpowerup, there is page explaining all the timings.
    http://www.techpowerup.com/printarticle.php?id=131
    An excerpt from the webpage.
    Quote from: http://www.techpowerup.com/printarticle.php?id=131
    Introduction
    Have you ever wondered what those numbers “2.5-3-3-8” or “2-2-2-5” and so on mean? Or have you seen words like “CAS” and “tRCD”? These are the timings for the memory, or the speed at which it processes certain commands. This whole settings area can be quite confusing and you have to have a certain knowledge of it, if you plan on overclocking. But some of you may just be plain curious as to what they are.
    Rated Memory Timings.
        * CAS (tCL) Timing: CAS stands for Column Address Strobe or Column Address Select. It controls the amount of time in cycles between sending a reading command and the time to act on it. From the beginning of the CAS to the end of the CAS is the latency. The lower the time of these in cycles, the higher the memory performance.
          e.g.: 2.5-3-3-8 The bold “2.5” is the CAS timing.
        * tRCD Timing: RAS to CAS Delay (Row Address Strobe/Select to Column Address Strobe/Select). Is the amount of time in cycles for issuing an active command and the read/write commands.
          e.g.: 2.5-3-3-8 The bold “3” is the tRCD timing.
        * tRP Timing: Row Precharge Time. This is the minimum time between active commands and the read/writes of the next bank on the memory module.
          e.g.: 2.5-3-3-8 The bold “3” is the tRP timing.
        * tRAS Timing: Min RAS Active Time. The amount of time between a row being activated by precharge and deactivated. A row cannot be deactivated until tRAS has completed. The lower this is, the faster the performance, but if it is set too low, it can cause data corruption by deactivating the row too soon.
          tRAS = tCL + tRCD + tRP (+/- 1) so that it gives everything enought time before closing the bank.
          e.g.: 2.5-3-3-8 The bold “8” is the tRAS timing.
    (The 2.5-3-3-8 figure is just an example for memory timings.)
    These are the four timings that you would see when memory is being rated. It is in the order of CAS-tRCD-tRP-tRAS. The lower these timings, the higher the performance of the memory. Some motherboard manufactors (DFI for example) list the timings in their bios CAS-tRCD-tRAS-tRP.
    Certain memories can take tighter (lower) timings at higher speeds. These are the more expensive memory modules out of the bunch. There are also other timings to consider in your BIOS. Not all boards will have options like these.
    http://www.techpowerup.com
    It doesn't matter which sata port on the same controller you insert a connector.  This is not like the PATA controller where master and slave can be determined by the end or middle connector.

  • What's the initial Disk Usage of New MacBPro

    Dear Community
    Pl let me know the initial Disk Usage of a new MacBookPro , retina with 265 GB.
    I am asking it, coz I see a lot of my space have been consumed up while I have not used many apps or data.
    Presently it says;
    Apps 22.7GB
    Other 10.74GB
    Pl also note that these are out of "250.4 GB", is it correct ?
    Recently, I run a Developer Installation by Command line but I stopped it in middle.
    Just wondering, if it has eaten up the space.
    Thanks

    Thanks Melophage;
    For taking time to answer it.
    Do you have idea, how to verify it and clean further.
    Thanks

  • What is the startup disk that the iMac says is full?

    Where is the startup disk and how can I access it to delete files.

    Do a search for and downlaod and install OmniDisk Sweeper and OnyX.
    Hard drive getting full or near full?
    Here are some of my tips for deleting or archiving data off of your internal hard
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Other things you can do to gain space.
    Delete any old or no longer needed emails and/or archive older emails you want to save to disc, Flash drive/s or to ext. hard drive.
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, Flash drive or ext. hard drive and/or delete any old documents you no longer use or immediately need.
    Uninstall apps that you no longer use. If the app has a dedicated uninstaller, use it to completely uninstall the app. If the app has no uninstaller, then just drag it to the OS X Trash icon  and empty the Trash.
    Also, if you save old downloaded  .dmg application installer  files, you can either archive and delete these or just delete the ones you think you'll never install, again.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its thing initially, then go to the cleaning and maintenance tabs and run all of the processes in the tabs. Let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    If you have any other large folders of personal data or projects, these should be thinned out, moved, also, to the external hard drive and then either archived to disc, Flash drive or ext. hard drive and/or deleted off your internal hard drive.
    Good Luck!

Maybe you are looking for

  • Error while creating a new application

    Hi Gurus I'm a newbie in FDM. I'm accessing Workbench Client from my local machine(Windows XP). When I choose to create a new application it is giving this error: "-2147220992- Error in EnumProjects"(clsAppMgr.mDisplayNewApp). Please help me solve th

  • Drives are not mounting to desktop on macbook pro.

    External USB drives, SD cards and even DVD media is not mounting to desktop when connected. This is a new problem for me and have not had this issue previously. I have successfully connected the same devices in the past. They all show up in the disc

  • ERROR IN GOODS ISSUE

    HI Guys,     I am working in Make to Order scenario(statergy 20),while doing Goods Issue for final assembly i am getting  error <b>(<b>Check table XMSKA: entry V12611000002 TNR1 SF01 000000   does not exist)</b>. For main assembly and main component

  • Real racing 3 iPad mini

    Hi, I just got my iPad and I had an iPod touch before but I couldn't get all my information for real racing to get on my iPad had previously had on my iPod touch fourth-generation. Now I have to start from scratch. Any ideas on how to fix this?

  • Select options and parameter

    We have a parameter and select option in Selection Screen, by using the parameter and select option in the select query, with out passing the any values to the Parameter and SO, how we will get the records?