What is the range of the airport express and extreme?

I'm thinking of my next network upgrade and possibly moving even more into the depths of apple and using one of the airport or even the time-capsule networking devices.  What kind of range am I look at with these devices?  Of all the specs. and such listed, I don't really see that mentioned and its a bit of a concern of mine (my current network doesn't give me good connectivity on the back side of the house).  I do understand that a lot of my troubles are from the location of my setup, but with that setup I also know the general blanked coverage is x ft in diameter approx.  So what is it for these devices?

Range is almost impossible to predict for any wireless device. It is a function of a number environmental variables, most of which concern the type and construction of the building in which it is used, and the presence or absence of competing wireless networks and other sources of interference.
I can tell you that in free and unobstructed space, the range of an AirPort Extreme or Express is hundreds of feet because I've measured it. A single Extreme blankets my home and most of the area around it, even with its transmitter power set to minimum (10%). You will not be able to get that range in a Manhattan townhouse though.
All Apple products are now capable of using the 5 GHz band. Using it exclusively will mitigate the effects of wireless interference, at the expense of not tolerating intervening obstructions as well as 2.4 GHz.

Similar Messages

  • What are the main differences between airport express and extreme?

    what are the main differences between the express and extreme base stations.

    In addition to Bob Timmons' link the main differences are as follows:
    Extreme has a slightly more powerful antenna (might not be true but from experience it seems to be)
    Extreme has USB HDD sharing
    Express has AirPlay
    Extreme has 3 Gigabit ports (don't be confused by Apple's page. Apple states 4 including WAN, 3 without WAN)
    Express is smaller
    Express has 10/100 Ethernet whereas Extreme has Gigabit

  • Whats the range of apple airport express

    whats the range of apple airport express.

    The effective range is about 150 feet or approximately 50 meters when there are no obstructions in the signal path between the AirPort Express and the wireless device receiving the signal.
    But, walls, ceilings and other obstructions absorb a great deal of the signal in a home, so it is not possible to predict how the AirPort Express might perform in your home until you try it out in your home.
    In general, you would not want the signal to have to negotiate moving through more than a few walls. A ceiling, because it is much thicker than a wall, will absorb a good deal more of the signal.

  • What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?

    What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?

    150 feet in clear space with no obstructions in the signal path.  It is not possible to predict range with any obstructions in the signal path.

  • Hi.   Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV?  Whenever I click either/or it just changes the speakers rather play through both?  Cheers

    Hi.
    Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV?
    Whenever I click either/or it just changes the speakers rather play through both?
    Cheers

    to transfer audio to an airport express the device needs to support airplay unless your samsung tv's manual clearly state it does support it then it don't
    appletv can't get audio input into it the optical connector is output only same with the hdmi port

  • Differences between AirPort Express and Extreme?

    What are they differences between AirPort Express and Extreme?

    You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

  • Problems with Airport Express and Extreme

    I have tried to set up Airport Express and Extreme.  Both proceeded normally in the Air Port Utility until the final stages.  Then it said it couldn't find the devices. When I tried again (many times), I couldn't even start the process, even though it did that the first time for both.  I'm stumped.

    To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
    Connection Sharing: Off (Bridge Mode)
    Click Update to apply the new settings
    AirPort Express Base Station (AX) - iTunes Setup
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing AEBSn's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AX > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

  • Any software differences between new airport express and extreme?

    I was wondering if there are any features or configuration differences between the two, such as configuring VPN passthrough.
    The only difference I can see is using the USB for hard drive use.
    Also, do you think the performance will be similar.  I know the time capsule actually rated slower than the extreme even though they use similar hardware.

    You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

  • What is the range for an Airport Express?

    What is the range (physical distance) for an Airport Express?
    What is the range (physical distance) for an Airport Extreme?

    The range of the AirPort Express is about 150 feet or 50 meters. But, this measurement is taken in free air, with no obstructions like walls or ceilings in the signal path, and no other networks in operation that might interfere with the wireless signal.
    In the real world, in a real home, once the signal passes through 3-4 walls, it is about gone. A ceiling will absorb more of the signal than a wall, because it is thicker. So, as much as possible, you want wireless devices to have line-of-sight with the wireless router for best performance.
    Bottom line....it is not possible to predict wireless performance in advance of any installation since there are so many variables involved.

  • Questions about AirPort Express and Extreme!

    I have BT Infinty and the hub is situated in the living room. What I want to do is extend the wi fi to my room which is around 10 metres away.
    Are you able to connect the AirPort Express to the network and then create a network for the AirPort Express for my MacBook Pro to connect to?
    I have two options and questions
    1. Buy a AirPort Extreme and replace my BT hub with that. Then use an AirPort Express to extend the wi fi. But when you extend the wi fi does it mean that when I search for a wireless hotspot from my Mac I connect the the AirPort Express? Or is there a way of making the AirPort express to have a different name?
    2. Use my Bt hub and buy a AirPort Express and connect it to my Infinty Connection. BUT is there a way of making a hotspot for the AirPort Express for example
    my Infinity connection is named Bt-Infinty2356
    I use the AirPort express to connect it and extend the wifi
    THEN is it possible to make a hotspot named "AirPort-Express-Muppet" for me to connect from my Mac?
    Thanks

    I have no experience with the "BT Infinity Modem" and "BT HomeHub", but I assume that they are two separate units?
    If yes: connect the modem direct to the Extreme by ethernet cable.
    If it is a "combined" unit: connect the Extreme by ethernet cable to one of the ethernet slots on the hub.
    In both cases set the Extreme to "Create a wireless network".
    Use a Airport Express to "extend a Wireless Network", and extend the Extreme.
    Do not expect the Airport Express to extend the BT hub wireless network, because it will not work.
    In both cases you have two wireless networks: one from the Hub and one from the Extreme.
    Off the record: I have the same situation in France with the "Livebox" (Orange) that is connected to a Netgear WiFi router: two network: the Livebox is just that, the Netgear is "relayed" through Netgear Routers (Switches) to five areas in the "house". The same in Switzerland, but there I used Extreme and Express units instead of the netgear units.
    The Hiome Hub should work fine connected to the modem by cable, and the other network also by connected to the cable. Do not mix the different brands: trouble.

  • Using Airport Express and Extreme Together

    I have the old Airport Express and have just bought the latest Extreme. I'm sure Extreme will work fine with my iMac but am not so sure it will work with my G4 Powerbook as it does not have the recommended software requirements. Is there anyway I can setup a network using both the old Express and the new Extreme?

    Welcome to the discussions!
    Your old AirPort Express is a "g" wireless device while your new AirPort Extreme is a newer and much faster "n" wireless device.
    If you are asking if you can use your old AirPort Express to "extend" the wireless from the AirPort Extreme using wireless only, the answer is yes....BUT....your new AirPort Extreme will drop down to old "g" wireless levels if you do this.
    The setup procedure for this is quite difficult and frustrating for many users. To get an idea of what is involved if you want to try this, see this link for the procedure:
    http://discussions.apple.com/thread.jspa?threadID=2355832&tstart=0
    IF...you are able to connect the AirPort Express to your AirPort Extreme using an ethernet connection, the setup will be much easier to accomplish and your AirPort Extreme will maintain faster "n" speeds on the wireless. Post back for more details if that is a possibility.

  • Airport Express and Extreme both having timeout issues once every few days.

    I have both an Airport Express and an Airport Extreme in the house (one on each side of the house), and for the last few months, we have been experiencing timeout issues with both. About once every few days, my computer (or any other computer here - all Macs) will lose connection to the hub. When I try to reconnect in the Wifi menu, it says "Connection timed out". Also, on my iPhone, when I try to connect, it says "Unable to connect".
    All this takes is a quick restart of the Airport (just pull the power out and plug in), but this is VERY frustrating. I've updated to the latest firmware... I'm not sure what else to do.
    Any ideas?

    Ok, thanks for clarifying that for me. I suggest starting by reviewing the following AirPort User Tip around the details for best base station placement. Let's see if this will help increase the bandwidth performance of your extended network. Most likely, due to combination of distance and Wi-Fi interference, you may not be getting the best bandwidth possible. Please post back your results.

  • 3 powerline adaptors with airport express and extreme

    Hi all,
    I am currently using two airport express and 2 TP-LINK powerline adaptors to create a "roaming" network, however i would like to add another powerline adaptor and an airport extreme to my network.
    Modem -> Airport Extreme in the living room with an ethernet cable plugged into the powerline
    1st Airport Express plugged into the 2nd powerline adaptor
    3rd Airport Express plugged into the 3rd powerline adaptor
    so my question is will the above setup work? or do i need to connect another powerline adaptor into the main Airport Extreme making the whole network use a total of 4 powerline adaptors? however if only a total of 3 powerline adaptors are required, would the network be confused and render the whole network useless?

    To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
    Connection Sharing: Off (Bridge Mode)
    Click Update to apply the new settings
    AirPort Express Base Station (AX) - iTunes Setup
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing AEBSn's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AX > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

  • Is it possible to extend the range of one airport express with a second airport express?

    Hi,
    We have a Time Warner router and have it hardwired to an Airport Express. Is it possible to extend the range of that one airport express with a second airport express?

    ... The new AirPort Express that I have is an 802.11n version, but the second one is an older model and I don't know which version it might be. Also, the system recently updated so I'm using the AirPort Utility 6.1.
    If you are using Mountain Lion, AirPort Utility 6.1 is the version installed by default. It will not be able to administer "older" AirPort base stations.
    For them, use AirPort Utility 5.6 which contains the features you need. It can administer your older Express as well as current production base stations.
    AU 5.6 is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
    This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
    Download Pacifist here: http://www.charlessoft.com/
    Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
    If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
    Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
    Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
    Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

  • Is it possible to access my DVR from the Internet using an Airport Express and Airport Extreme?

    I would like to use my Airport Express to connect to my DVR and use it to access the Internet by setting it up to wireless extend my Airport Extreme network?
    This would allow me great flexibility to place the DVR wherever I wanted.  I would create a static IP address for the DVR but would I also have to create one for the Airport Express as well?  What would I put as my Gateway address?  Would it be the IP address of the Airport Extreme or the Airport Express?
    Looking forward to the advice to see if this is possible...

    It may not be compatible with the iPad. See below for reference.
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Maybe you are looking for

  • MSI GeForce GTX 970 with MSI Z68A-GD55 (G3) motherboard

    Hi! I have seen a similar issue here that was resolved with the help of this forum. (https://forum-en.msi.com/index.php?topic=251322.0). I still want to ask my questons however, since I have a slightly different situation. I recently bought a new Gra

  • Scheduled finish date for process orders not updating in BW

    We are having problems with the scheduled finish date (GLTRS) for process orders. When the process order is already released, changes done in R/3 on the scheduled finish date will not result to a delta hence data in BW is not updated. Table AFKO, whe

  • Difference btween oracle 10G database & oracle 11G database

    Hi i have a web application have 10G database engine, now i will upload it on a host server witch supports oracle 11G database. can i export Dump file from my Oracle10g database and import it into oracle 11G database successful. what can i do? please

  • Problems exporting text in Indian languages

    I tried exporting text in Indian languages to XML format, the resulting XML had '?' characters. The following code was used var exporter:ITextExporter = TextConverter.getExporter(TextConverter.TEXT_LAYOUT_FORMAT); var xmlExport:XML = exporter.export(

  • CRserverR2SP2 Update Link Required

    Morning all, Could someone please guide me to the right URL for Crystal Reports Server XI R2SP2 updates? I have been to Business objects Service Pack support section but I could only found SP3 however, when I went to Critical Hotfixes it says Busines