What is the reason that the integrated camera does not exist in the hardware configuration?

When I start Face Time, my integrated camera doesn't work.
I check my hardware configuration, but, the camera doesn't exist.

Welcome to Apple Support Communities
Does it happen with other applications that use the camera, like Photo Booth? If so, I recommend you to reset the PRAM > http://support.apple.com/kb/HT1379 Then, reset the SMC > http://support.apple.com/kb/HT3964
After resetting the SMC, start the iMac and see if you can use your camera. If not, hold Command and R keys while your computer is starting and reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718
If it doesn't work, it's a hardware issue, so make a backup of your data and take the iMac to an Apple Store or reseller

Similar Messages

Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration

When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.

Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen

The file required for contribute compatibility does not exist on the server

Hi, when connecting to a server in Dreamweaver that is set up
for Contribute I keep getting this message when putting files:
quote:
The file required for contribute compatibility does not exist
on the server. Would you like to turn off Contribute compatibility?
I see the post from jonbradley below, but the solution
suggested doesn't help me:
Does anyone have any idea what this means and how to stop it
from displaying?
Thanks in anticipation...
Simon

Did you search the forum on compatibility?
http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\).

Error on new windows 8.1 project: The type or namespace name 'Foundation' does not exist in the namespace

I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.

I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step.

The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint' (are you missing an assembly reference?)

I am trying to compile my SharePoint 2010 solution(VS2010) in VS2013 to deploy in SP2013, i have removed all old 14 ref and added 15 ref for microsoft.SharePoint, office.server and other assemblies.
still i am getting "The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint'
(are you missing an assembly reference?)"
did i miss any step here or any version issue?
any suggestions to resolve
Thanks
S.Venkata Appaji

Hi,
Just confirm that Target Frame work has been changed to 4.5 or not, if not changed it to 4.5 and give it a try. Then also it gives error then check the SP reference, dll properties and check its version(it should be 15.0.).
PS:-You can fine target framework under project properties->Application-> Target Framework.
Regards,
MS

ORA-13605: The specified task or object Get does not exist for the current

Dear all,
11.1.0.6 on solaris 10
SQL>
SQL> DECLARE
2 taskname varchar2(100);
3 taskdesc varchar2(128);
4 task_id number;
5 object_id number;
6 timeLimit varchar2(25);
7 numDaysToRetain varchar2(25);
8 objectName varchar2(100);
9 objectType varchar2(100);
10 BEGIN
11 taskname := 'SEGMENTADV_8980096';
12 taskdesc :='Get';
13 numDaysToRetain :='30';
14 dbms_advisor.create_task('Segment Advisor','',taskname,taskdesc,NULL);
15 dbms_advisor.create_object(taskname, 'TABLE', 'TRPT', 'CRM_CHECK', ' ', NULL, object_id);
16 dbms_advisor.set_task_parameter(taskname, 'RECOMMEND_ALL', 'TRUE');
17 dbms_advisor.set_task_parameter(taskname, 'DAYS_TO_EXPIRE', numDaysToRetain);
18 END;
19 /
DECLARE
ERROR at line 1:
ORA-13605: The specified task or object Get does not exist for the current
user.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4766
ORA-06512: at "SYS.PRVT_ADVISOR", line 4637
ORA-06512: at "SYS.DBMS_ADVISOR", line 56
ORA-06512: at line 14
Am running the above as sys user ..
Any idea ?
Kai

Hi,
This link may help:
ORA-13605: The specified task or object ADDM:<task number> does not exist.
Thanks and Regards,
Rajesh K.

Experiencing "The type or namespace name 'DirectoryServices' does not exist in the namespace 'System' (are you missing an assembly reference?)" compilation error

I am just starting to implement a new user login authentication process wherein after prompting user for username & password, I hope to authenticate them againts our company Active Directory user data. Since I am just starting, I only have very few things
done at this point which is how I wanted to work on this so that my development environment is still at its simplest state.
I am using the following for development:
MS-Visual Studios Professional 2013 Version 12.0.30501.00 Update 2, and
MS .NET Framework Version 4.5.50938.
Here are my project solution's current items:
Web.config:
<?xml version="1.0"?>

<configuration>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
</system.web>
<system.webServer>
<defaultDocument enabled="true">
<files>
<add value="Login.aspx" />
</files>
</defaultDocument>
</system.webServer>
</configuration>
Web.Debug.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">

<system.web>
<compilation xdt:Transform="RemoveAttributes(debug)" />

</system.web>
</configuration>
Web.Assemblies.config:
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="false" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
<assemblies>
<add assembly="System.DirectoryServices, Version=4.0.0.0, Culture=neutral PublicKeyToken=b03f5f7f11d50a3a"/>
</assemblies>
</system.web>
</configuration>
Login.aspx:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="Login" %>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div id="loginForm" style="height: 562px; width: 399px; margin-left: 0px" title="Login Form">
    
<asp:Label ID="loginPageLabel" runat="server" Font-Bold="True" Font-Names="Arial Black" Font-Size="Large" Text="Please Log In"></asp:Label>
<br />
<br />
        
<asp:Label ID="loginUsernameLabel" runat="server" Text="Username:"></asp:Label>
   
<asp:TextBox ID="loginUserNameTextBox" runat="server" OnTextChanged="loginUserNameTextBox_TextChanged" Width="213px" Wrap="False" AutoPostBack="True" TabIndex="1"></asp:TextBox>
<br />
<br />
        
<asp:Label ID="loginPasswordLabel" runat="server" Text="Password:"></asp:Label>
   
<asp:TextBox ID="loginPasswordTextBox" runat="server" OnTextChanged="loginPasswordTextBox_TextChanged" Width="212px" Wrap="False" AutoPostBack="True" TabIndex="2"></asp:TextBox>
<br />
<br />
                           
<asp:RadioButton ID="loginUAradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginUAradioButton_CheckedChanged" Text="TUPSS Associate" AutoPostBack="True" TabIndex="3" />
  
<asp:RadioButton ID="loginAFradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginAFradioButton_CheckedChanged" Text="Area Franchisee" AutoPostBack="True" TabIndex="4" />
<br />
<br />
<br />
                            
<asp:Button ID="loginSubmitButton" runat="server" Font-Bold="True" OnClick="loginSubmitButton_Click" Text="Log In" TabIndex="5" />
               
<asp:Button ID="loginCancelButton" runat="server" Font-Bold="True" OnClick="loginCancelButton_Click" Text="Cancel" TabIndex="6" />
<br />
<br />
  
<asp:Label ID="loginStatusInstructionLabel" runat="server" Text="Status/Instruction:"></asp:Label>
<br />
  
<asp:TextBox ID="loginStatusInstructionTextBox" runat="server" Height="230px" MaxLength="100" Rows="12" TextMode="MultiLine" Width="360px" EnableViewState="False" OnTextChanged="loginStatusInstructionTextBox_TextChanged" ReadOnly="True" TabIndex="-1"></asp:TextBox>
</div>
</form>
</body>
</html>
Login.aspx.cs:
using System;
using System.DirectoryServices;
public partial class Login : System.Web.UI.Page
private string uName; // user-entered username
private string pWord; // user-entered password
private int loginLoadCycles; // just keeping track of how many times Page_Load is called
protected void Page_Load(object sender, EventArgs e)
if (this.loginUserNameTextBox.Text == String.Empty &&
this.loginPasswordTextBox.Text == String.Empty &&
this.loginUAradioButton.Checked == false &&
this.loginAFradioButton.Checked == false)
this.loginInit();
this.setLoginVisibilityAndFocus();
this.loginLoadCycles += 1;
private void loginInit()
this.uName = String.Empty;
this.pWord = String.Empty;
this.loginLoadCycles = 0;
private void setLoginVisibilityAndFocus()
// Decide on whether or not the Login submit & cancel buttons should be enabled or not
if ( this.loginUserNameTextBox.Text == String.Empty ||
(this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false) )
this.loginSubmitButton.Enabled = false;
this.loginCancelButton.Enabled = false;
this.loginStatusInstructionTextBox.Text = "Please specify if you are a TUPSS Associate or an Area Franchisee by checking either the 'TUPSS Associate' or 'Area Franchisee' checkbox.";
else
this.loginSubmitButton.Enabled = true;
this.loginCancelButton.Enabled = true;
if (this.loginPasswordTextBox.Text == String.Empty)
this.loginStatusInstructionTextBox.Text = "Now that you have entered your username & type, please enter your password.";
else
this.loginStatusInstructionTextBox.Text = "When you are ready, please select either the Log In button to login, or the Cancel button to abort.";
if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false)
this.SetFocus(this.loginUAradioButton);
else if (this.loginUserNameTextBox.Text == String.Empty)
this.SetFocus(this.loginUserNameTextBox);
else if (this.loginPasswordTextBox.Text == String.Empty)
this.SetFocus(this.loginPasswordTextBox);
else
this.SetFocus(this.loginSubmitButton);
protected void loginUserNameTextBox_TextChanged(object sender, EventArgs e)
protected void loginPasswordTextBox_TextChanged(object sender, EventArgs e)
// For some reason, after specifying that the password entry box's textmode to 'Password' setting,
// the UI's password textbox is emptied
this.loginStatusInstructionTextBox.Text = "NOTICE:\nThis application is still under development.\n\n" +
"This is why the password you entered is visible. Once this portion of the application is ready, it will be masked.\n\n" +
"Also, still need to figure out why when changing this to Password entry mode to mask its entered data, password is getting reset.";
protected void loginSubmitButton_Click(object sender, EventArgs e)
this.loginLoadCycles = 0;
this.uName = this.loginUserNameTextBox.Text;
this.pWord = this.loginPasswordTextBox.Text;
if (this.loginUAradioButton.Checked == true && this.loginAFradioButton.Checked == false)
this.loginLADPauthenticate('U'); // authenticate UPS Associates against UPS Corp's Active Directory
else if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == true)
this.loginLADPauthenticate('A'); // authenticate Area Franchisees against UPS Store's iNet Active Directory
else
// set colors to show that this is an error instead of a status message or instruction
this.loginStatusInstructionTextBox.Text = "ERROR: Cannot log in without specifying if you are an UPS Associate or an Area Franchisee!";
protected void loginCancelButton_Click(object sender, EventArgs e)
this.loginStatusInstructionTextBox.Text = "You have selected to cancel from logging in...";
// Still need to plan what to do when user cancels out of logging in. For now, just initialize class attributes
this.loginInit();
protected void loginUAradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginUAradioButton.Checked == true)
this.loginAFradioButton.Checked = false;
msg = "Thanks for specifying that you are a TUPSS Associate. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
protected void loginAFradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginAFradioButton.Checked == true)
this.loginUAradioButton.Checked = false;
msg = "Thanks for specifying that you are an Area Franchisee. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
private void loginLADPauthenticate(char whichActiveDirectory)
String msg = "Authenticating user '" + this.uName + "' with password '" + this.pWord + "' against ";
if (whichActiveDirectory == 'U')
msg += "UPS Corp's Active Directory...";
else if (whichActiveDirectory == 'A')
msg += "The UPS Store's Franchisee Active Directory...";
msg += "\n\nNOTICE:\nThis is still under development.\n\nAt this point, this application is supposed to do something else now but is not yet ready.";
this.loginStatusInstructionTextBox.Text = msg;
this.loginStatusInstructionTextBox.AutoPostBack = true;
// Authenticate using LDAP
protected void loginStatusInstructionTextBox_TextChanged(object sender, EventArgs e)
I confirmed that I have System.DirectoryServices.dll located in
C:\Windows\Microsoft.NET\assembly\GAC_MSIL\v4.0_4.0.0.0__b03f5f7f11d50a3a\ folder and that I as well as System have read as well as read&execute privileges
not only to all folders in its path but also to the DLL file itself.
I would appreciate any help in trying to resolve this compilation error so that I can proceed with implementing LDAP features for this endeavor.
Thanks so much,
hguico @ The UPS Store

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

The type or namespace name 'Reporting' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

I have a Windows app that was built some 7 years ago on a WinXP machine using VS2005. It uses Crystal Reports for the reporting. We recently got new machines with Win7 x64 and I installed VS 2013 Pro. I moved the app to my machine and upgraded
it to that VS version. It previously had a .NET Framework target of version 2.0. I changed the target to version 4.5.
I want to use the MS Reporting instead of Crystal Reports. However, I cannot get the ReportViewer control to show up in the Toolbox.
I downloaded and installed the ReportViewer Runtime 2012. I installed the ReportViewer using the NuGen GUI and console. I tried adding the control to the Toolbox using Tools > Choose Toolbox Items... but it never shows up after I browse to
the Microsoft.ReportViewer.WinForms.dll file and select it. I manually typed 'Microsoft.Reporting.WinForms.ReportViewer' and the intellisense came up fine. But when I build the project I get the error shown in this post's title.
I'm at a complete loss. I've searched all over and tried everything I can find on the subject with no luck.
Can anybody help?
Thanks.

Thank you for taking the time.
The Report Viewer will not appear on the Toolbox, even with references to that assembly. However the Crystal Reports viewer IS in the Toolbox.
I think it may be because Crystal Reports is installed and integrated? I don't know. I just can't get it to work.
Thanks again.
Hello,
From
ReportViewer Controls (Visual Studio), we could get that ReportViewer Controls are included in VS2013, that means we don't need to install that control manually.
To confirm whether this issue is related to your Visual Studio or Crystal Reports, I would recommend you consider testing it with the following ways.
1. Create a simple windows form application, and open a form designer window, and check whether reportviewer is inside the tool box.
If it is available, then we could focus on your project to narrow down this issue.
If it is still missing, we could test it with #2.
2. Uninstall Crystal Reports and disable all add-ins of VS2013, and if possible, you could also uninstall and reinstall VS2013 to make sure the environment is clean enough. Next repeat the steps of #1.
It will be much helpful if you could share the detailed results with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The type or namespace name 'Microsoft' does not exist in the namespace 'System'

I got the reference error while building the code.
I have added the system and microsoft.sharepoint reference error. But still showing the same error.
Need help!

Hi
According to the error message, please check that whether the target version of the .NET Framework of your application has been changed.
Please do as follows:
1. Make sure your project is target on .NET 3.5 .
2. Add
the namespace in your code.(using Microsoft.Office.InfoPath)
More information about
Troubleshooting .NET Framework Targeting Errors:
http://msdn.microsoft.com/en-us/library/vstudio/cc668079(v=vs.100).aspx
A sample about
Creating a Basic Form Template with Code for your reference:
http://msdn.microsoft.com/en-us/library/aa942693(v=office.14).aspx
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

The type or namespace name 'Workflow' does not exist in the namespace 'Microsoft.Office' (are you missing an assembly reference

Hi Folks,
I created SharePoint reusable deigner work flow which has just 2 state approval process.
I generated the wsp file with save template option and I successfully imported it into visual studio 2010 I just removed List from the tag and put my custom content type id
<Association Categories>List<Association Categories>
when I build the solution I got erro which mention in the title.
Thanks in advance.....

Hi Shivaprasad,
Check .net version in your project properties, If it isset to .net 2.0, change it to .net version to 3.0 and it should work.
Let me know if it works or not..
Nilesh

The type or namespace name 'SharePoint' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)_

Hi,
am trying to use simple client object model using console application and have Included the required assembly
microsoft.sharepoint.client
microsoft.sharepoint.client.runtime
and added using directive microsoft.sharepoint.client
then also am getting the error plese help me
thanx in advance

Hi,
From the properties of the project solution, change the platform target to x64, and the target framework to .NET Framework 3.5.
Let me know if you have any doubt.

Hp TrueVision HD web cam does not work. The light will come on but no image appears in the window.

Hi.
I have an HP Pavilion dv7 6178us Entertainment PC I just bought it last week. My operating system is Windows 7 Home Premium Service Pack 1 64 bits.
The problem I have is that yesterday I install Skype in the computer and realized that the HP TrueVision HD web cam does not work. The light right next to the web cam will light up but no image will appear on the screen.
I have checked the software that I have in the computer for the webcam and the program is CyberLink YouCam BE version 3.5.
But the web cam does not work. The light right next to it will turn on when I activate Cyberlink, Skype or Messenger but no actual image will come out in computer screen. The computer is fully updated BIOS, Windows 7 and HP.
But the web cam is not working. Could you help me fix this problem?
Best regards:
JEIO71

I have a pavilion dv6 notepad. it's about a year old.
about a month ago internal webcam truevision hd stop working.
Called hp tech. they sent a box for me to ship the laptop.
they hp tech attempted to correct the problem via internet
did not work.
wanted me to do a restore to factory setting i stopped him there.
Webcam detected in device manager.
the webcam light come on but no image.
I actually see the back drop through the image space.
running windows 7, fully updated.
I found many comments on the web about the webcam connector disconnecting.
But if it was the case with my computer, the webcam would not be detected.
Many other comments suggests to do a restore to factory setting but \i read also that
does not work often.
I read many comments where disappointed clients believe hp should update
the software but the driver is actually microsoft dating back to june 2006.
Is it possible it's a hardware problem, ie webcam is burned out.
I have received a box to sent it and know they will do a system restore.
Don't feel to go that way.
Many comments refers to hp making an effort to get a driver update.
ps I decided to purchase a logitech webcam, works perfectly.
What else can I do to fix this problem.
Can hp send me another internal webcam.

Tax Code does not exist in the system (T007A)

Hi All
When we try to create a receipt for a particular expense type in ESS Travel & Expenses, we get the follwing error "Tax code Z0 does not exist in the system (T007A)". Upon creating a tax code Z0 it gives the following error "Tax code does not exist in the system (T007A)". When we change the Receipt currency to USD instead of Bristish Pound it gets accepted without the error. It works perfectly fine when expense report created using GUI. The error occurs only when we create the expense report using Portal ESS T&E. I was not able to find anything related to this in the SDN. If any of you could help me out, that would be great.
Thanks, Raj

Hello Mr. Raj!
I checked the related issues that other customers reported.
I came up with a list of things you can try that may help you solve your issue.
a) Check if the field V_706D_B-LAND1 is filled with the home country in the IMG step 'Define Global Settings'. So may I ask you to check. Moreover, if this is not the reason, may I also ask you, if you get the same error when using our backend test transaction PR_WEB_1200? Thank you,
b) Could you please check that you don't have any expense type with value " "(blank) in the tax code field in V_T706B1?
c) Apply Note 1129853 - Web: Input tax code for credit card receipts
d) Please follow in IMG:
Financial Accounting
Travel Management
Travel Expenses
   Master Data
    Control Parameters for Travel Expenses
     Define Global Settings
Input Tax
Country                                       { Your country here }
Enter an input tax code for 0% input tax [    ] <<<
If here it's blank, this must be filled with a tax code. I found this out when I set the field "Input Tax per Travel Expense" then I get a warning "Enter an input tax code for 0% input tax".
The reason for this is that in your system, you don't have a "blank" tax code and it looks for this entry. Please kindly define a tax code in this setting.
I hope I was able to help you with this information.
Wilian Segatto
SAP Support - HCM/XSS

What is the reason that the integrated camera does not exist in the hardware configuration?

Similar Messages

Maybe you are looking for