What is the recommended capacity for an external FW audio hard drive?

For a home studio recording mostly guitars and vocals

also make sure to get a Firewire drive running at 7200rpm not 5400rpm.
1TB drives are much cheaper these days, so I recommend spending the extra cash on 750GB or 1TB or above.
JG

Similar Messages

What is the best format for a new video editing hard drive?

Hello,
I would like to know how to properly format a new 2 TB Hitachi hard drive that I have for my early 2008 Mac Pro that will be installed in drive slot 3. Information at the following link explains that:
"Journaling is essential for OS disks (boot drives), but for disks used for video media, used for editing purposes, Journaling is not advised, as it can affect the speed of data being written. For video media (scratch) drives you would want to select the Mac OS Extended, no journaling."
"Journaling only affects the speed of either writing to or modifying a file, it has no effect on the read speed of files. If you're writing a lot of data, for for a long period of time, like capturing video, the write speed of the data will slow down, as the Journaling record keeps updating it's self."
http://www.kenstone.net/fcphomepage/formatting_hd_macstone.html
My question is, is this information legit and should I format my new hard drive using Mac OS Extended? I will be using it solely for the purpose of reading and writing HDV and AVCHD video files using Final Cut Pro 7.
Thanks
Tom

Hi there,
Ive always followed the idea that journalling is turned off, so I would follow the advice given and turn journalling off.
In addition I would also make that drive "private" to spotlight so it doesn't search or catalogue there.
If its of interest, I've always formatted my drives in the following way
make 2 partitions,
partition 1 - make this about 10% of the drives capacity and label DO NOT USE
partition 2 - make this the remainder of the capacity
the reason being (So Im told by the drive gurus) is that the first sector contains the volumes boot block - this can get corrupted/damaged so having it partitioned like this means you can erase it safely whilst keeping your media.
Ive followed this for years and it has worked on the few occasions a drive has misbehaved.
cheers
Andy

What is the best and reasonably priced external cd/dvd optical drive for an Imac 21.5 inches from late 2009?

What is the best and reasonably priced external cd/dvd optical drive for an Imac 21.5 inches from late 2009?

A lot of people have a Mac where the superdrive has been taken out to be replaced with a harddisk. Try to find a friend who has done that, give him a beer and take the superdrive, then buy a superdrive container from OWC or another for afew dollars and put it in there. This slimdrive container has a USB connector. There you go.

What is the recommended way for persisting JMS messages?

What is the recommended way for persisting JMS messages?. As per the IMQ admin documentation , using the default built-in persistence type which is through unix flat files is much efficient and faster, compared to the database persistence .
Tried setting up the jdbc stuff for database persistence on iAS 6.5 . I am getting the following
error .
[24/Apr/2002:16:09:20 PDT] [B1060]: Loading persistent data...
[24/Apr/2002:16:09:21 PDT] Using plugged in persistent store: database connection
url=jdbc:oracle:thin:@dbatool.mygazoo.com:1521:qa1 brokerid=ias01
[24/Apr/2002:16:09:23 PDT] [B1039]: Broker "jmqbroker" ready.
[24/Apr/2002:16:11:56 PDT] ERROR [B4012]: Failed to persist interest
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Response%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0AisReadonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_Response%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
java.sql.SQLException: ORA-01401: inserted value too large for column
[24/Apr/2002:16:11:56 PDT] WARNING [B2009]: Creation of consumer SM_Response to destination 1
failed:com.sun.messaging.jmq.jmsserver.util.BrokerException: Failed to persist interest
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Response%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0AisReadonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_Response%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
java.sql.SQLException: ORA-01401: inserted value too large for column
Any thoughts?

From the output, you are using imq 2.0. In that release
the key used to persist a durable subscriber in the database
table has a limit of 100 characters. The output shows that
your value is:
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Res
ponse%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0Ais
Readonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_R
esponse%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
which is much longer than 100 characters.
You might want to shorten the string you use for the
durable name.
And yes, the default file-based persistence store is
more efficient when compared to the plugged-in persistence
through a database.

If i have 64gb ssd on macbook air, what is the maximun capacity for boocamp?

if i have 64gb ssd on macbook air, what is the maximun capacity for boocamp?
macbook air 4.1 64ssd

Hard to say without more information.
For some helpful info:
http://support.apple.com/kb/HT5634
Consider doubling the memory and storage requirements stated in the article.
http://www.apple.com/support/macbookair/bootcamp/
Best.

What's the recommended setting for "Process memory usage" ("process virtual" in UI) for a 64-bit host on a 64-bit OS?

Hi gurus
In resource based throttling, what's the recommended setting for "Process memory usage" ("process virtual" in the resource based throttling tab of the UI) for a 64-bit host
on a 64-bit Windows OS?
According to MS (http://msdn.microsoft.com/en-us/library/ee308808(v=bts.10).aspx):
"By default, the
Process memory usage throttling threshold is set to 25. If this value is exceeded and the BizTalk process memory usage is more than 300 MB, a throttling condition may occur. On a 32-bit
server, you can increase the Process memory usage value to 50. On a 64-bit server, you can increase this value to 100. This allows for more memory consumption by the BizTalk process before throttling
occurs."
Does this mean that 100 is the recommended setting for a 64-bit host on a 64-bit Windows?
Thanks
Michael Brandt Lassen

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

What is the recording capacity for music on my ipod shuffle?

what is the recording capacity for music on my ipod shuffle?

It depends on the size of the file and the memory your iPod has like 2GB.

What is the recommended version for ITS?

HI Experts,
what is the recommended versions for ITS?
We have SAP R/3 4.6c and WAS 6.40 ................what will be the recommened versions ITS for the above said SAP R/3 4.6c and WAS 6.40 combination...........
and also furnish the list of all versions of SAP R/3 ,WAS and ITS........
Higher points will be rewarded for useful inputs........
Thanks in Advance,
Shakthi

ITS 6.20 gets well with 4.7.. There was ITS 6.4 also released but there were some issues.. you can check the ITS release note from
https://service.sap.com/notes for more info.
Hope this helps
rgds

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

What's the largest capacity bus-powered external hard drive?

I realize that this isn't a Mac specific question, but I'd really like a recommendation. What's the largest capacity bus-powered (preferably USB) external hard drive available. My new MBP has a 500GB drive so I would need something with probably 640GB or bigger. Problem is I can't find anything over 500GB that's bus-powered. Everything I've found requires an external power supply which is what I'm trying to avoid. If anyone has a recommendation, please share it.

Have a search on the web for USA retailers who supply empty enclosures and drives separately. The enclosure is the physical case and the bits of circuitry and the physical ports. Tell them what you want and ask him what drives and enclosures he has to suit your purpose and if he can fit the two together for you. I have such a supplier but am in UK.
Does it have to be a USB bus? Firewire is better and gives more power. One way I power a 360GB pocket drive is to feed from TWO USB ports on the computer into one input port on the drive(now in the enclosure) you should be able to buy a sort of "Y" shaped cable with two full size flat USB connectors at one end and one single connector at the drive end. The drive end often will be a mini usb port. What you want will depend upon the size of the input into the drive.

What are the recommended specs for Spiceworks Network Monitor

What are the recommended disk size and memory for Network Monitor?
This topic first appeared in the Spiceworks Community

Thanks for the response Ralph but I am looking for a more personal experience someone may have managing 200+ Macs via the OS X server and what their specs are.

My 2008 MacBook Pro logic board died and I'm pulling the hard drive out. What Apple computers have room for a 2nd 2 inch hard drive?

The logic board on my 2008 MacBook Pro died. But the hard drive is fine. What Apple computer has room for me to insert my old drive as a 2nd hard drive?

You can add it to any unibody MacBook Pro in the optical drive bay, if you can get along without an optical drive and you aren't worried about voiding the warranty (or if the machine you buy isn't under warranty). You can't add it to a Macbook Air, Mac Mini, or iMac, but you can easily put it into a Mac Pro. And of course with any Mac you can put it into an external enclosure and use it as an external drive.
See my second post in this thread for a couple of enclosure recommendations:
https://discussions.apple.com/message/17791697#17791697

WHAT ARE THE RECOMMENDED CERTIFICATIONS FOR A SOFTWARE DEVELOPER?

HI FRIENDS COULD SOME ONE HELP ME OUT WITH THE LIST OF RECOMMENDED CERTIFICATION FOR A PROGRAMMER. TO GIVE YOU AN IDEA OF MY WORKING PLATFORM. I WORK IN C/C++ AS FRONTEND WITH UNIX AS BACKEND. I ALSO DEAL WITH UML AT TIMES. SO DO PLEASE HELP ME OUT TO SPOT THE EXACT CERTIFICATION WHICH WOULD HELP ME IN MY CARRIER.
Edited by: user11087237 on 20 Apr, 2009 9:43 PM

You can get an OCP (Advanced PL/SQL) by completing 1z0-146. You have in practice to get PLSQL OCA first.
You can also get OCP via a forms route instead .... 1z0-141. What I am trying to say is Oracle has a number of products other than sql* Forms, and forms may be in decline, so if you are not already familiar with forms that may not be the best place to put efforts.
What I was trying to say that is possilbly that effot getting to know apex (application express) may be better than time spent trying to ge to grips with and certifiying in Forms. (Though as far as I am aware there is no apex certification).
i feel that you suggest me something other than oca /ocp certification. if i am right do please clear me out . and for your information i have worked in sql & plsql for quite a good time.In summary
I am suggesting you seriously consider Oracle PL/SQL Developer Certified Associate(OCA) and Oracle Advanced PL/SQL Developer Certified Professional (OCP).
However the case for studying for (Oracle Forms Developer Certified Professional (OCP)) is perhaps less clear cut if you have not aleady got forms experience, and that for you effort may be better spent elsewhere, possilby even in non certified study (jdeveloper, application express, oracle designer ... )
Rgds - bigdelboy
Hope that is less unambiguous.

What is the recommended architecture for OWSM

We are currently trying to completely the architecture documentation for a new SOA suite project within our company. Unfortunately we are struggling with the architecture design around the OWSM with regards to security. We are proposing to have 2 instances of the SOA suite sat on a VM ware cluster but this cluster is hosts some very sensitive data.
Obviously any externally facing web serivces should have the OWSM manager sat in front of. But if we host the OWSM on the same SOA suite instance will this provide enough security for us? Does any one have any ideas about this or should?
Do we need to host the OWSM on an alternative server to make it securer?

Hi,
Seems like what you are trying to accomplish will be possible.
But still for web services being accessed from outside, it is seen/preferable that a OWSM sits in a DMZ kind of environment. where every request is being intercepted by the WSM before entering into the internal SOA environment.
thanks

What is the recommended practice for bundling JRE with Java Application?

Hello,
I am using a software called Advanced Installer to create a Windows installer (.msi file).
This .msi file contains :
- a .exe file which is a wrapper for a .jar file (a Java Swing program),
- and a directory for the JRE.
I read an article on the web which recommended bundling the JRE with the Java program. And
this is what I am doing. And my understanding is that if the user's system does not already
have the JRE installed, the bundled JRE would allow my Java Swing program to run.
However, when I tried to install my .msi file on a system that did not already have the JRE,
my Java Swing program would not start. After installing the JRE on this system, my Java
Swing program started and ran fine.
Do I really need both JREs, one bundled with my Java Swing application and one installed at the
system's location for my Java Swing program to start and run?
Another question I have is that if every application would bundle its own JRE, there could be many
copies/possibly versions of the JRE on the system, is this acceptable? What is the common or
recommended practice?
Thank you for your help.
Akino.

I'm sure why it didn't work. That is how I bundle the JRE. The only disadvantage about bundling is the size of the installer file will be pretty large. In my opinion, relying on a public version is not a good idea if you have no control of the target box. The user might, for some reason, decide to uninstall java or upgrade to a new incompatible version and your app. may stop working. I'm sure many on here will disagree with this though.
I always use the marner .exe wrapper:
http://www.megaupload.com/?d=FYZAVM77
and inno installer:
http://www.jrsoftware.org/isinfo.php
They're both free to use and I've had no problems with them. Another wrapper is Javaround:
http://sourceforge.net/project/showfiles.php?group_id=234356

What is the recommended capacity for an external FW audio hard drive?

Similar Messages

Maybe you are looking for