What is the recommended length of the cable in between the GPIB instrument and GPIB-USB card.

hi,
we are planning to use GPIB-USB Controller in our application by replacing the existing GPIB-PCI controller. Our GPIB instrument doesn't have the standard IEEE GPIB Connector. So, we will have to connect one more cable in between GPIB-USB controller and the GPIB Instrument. I just want to know what is the recommended lenth of the cable that can be connected in between the GPIB instrument and the GPIB-USB card. Could anybody please help me?
Thanks,
Rajaram

Page 730 in the 2001 catalog gives detailed cabling requirements for the GPIB bus. It's usually best to keep the length 2meters or less.
Randy Solomonson
Application Engineer
National instruments

Similar Messages

What are the new instruments and loops included with 7.2?

Subject says it all.
Thanks

•New instruments: Radio Sounds, Nature Sounds, Comedy Noises, Applause and Laugher.
•New loops: 520 loops in iLife Sound Effects folder.
I may be wrong! I haven't installed 7.2 yet.

My iphone has just got the itunes symbol and a usb cable showing on the screen it wont turn on or let me do anything what can i do???

i was updating my iphone 3gs software on my pc and it came up with an error and since then i have just had the itunes symbol and a usb cable on my screen. i cant do anything with it what can i do?

The only thing you can do is what the picture is telling you to do: plug it into iTunes and restore it.

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

What are the supported Platforms and system requirements for JSE?

What are the supported Platforms and system requirements for JSE?

Hi There,
The following are the system requirements & the support platforms for JSE :-
* Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
* Solaris 9 Operating System (x86 Platform Edition)
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
* Windows 2000 and Windows XP
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher

Has anyone developed a site for podcast in Muse? If so what are the pro's and con's vs. using Wordpress?

have built a few sites in Muse and hope to host my podcast on a dedicated Muse created site. I use BC for my sites. Has anyone designed a podcast site in Muse and if so, what are the por's and con's opposed to just doing this with Wordpress and power press plugins?

one-armed is the easiest to install - less disruptive as you can keep your current network unchanged.
However, it requires special configuration to guarantee that the return traffic from the server goes back to the CSM.
This is done by doing client nat which will prevent the servers to see the client ip address and therefore to create statistic based on client ip.
There is a way to inser the client ip in the HTTP header, but it only works for HTTP.
Router-mode is easier to understand and troubleshoot.
The CSM is just like a router with vlans and routing between each of these.
It requires a minimum of configuration.
However, it is important to design correctly.
For example I would recommend not to have client accessing the CSM directly.
They should go through the MSFC first.
Then I would recommend to have only 1 vlan between CSM and MSFC- this is because the CSM only uses 1 default gateway even if you can configure many.
You never know which is active.
The CSM also expect the traffic to come back on the vlan it went out. If you have multiple vlan it is difficult to control on which vlan the response will come back.
Finally 'bridge mode' is good if you want to insert the CSM between the servers and their current default gateway without having to reconfigure the servers.
This is a good solution.
Disadvantage is that all traffic from servers will go through the CSM and it is more difficult to avoid in case you really need it.
A little more complex to troubleshoot as well.
Conclusion: bridge or routing mode is ok - avoid at all cost one-armed.
Regards,
Gilles

What is the BIS pack and what does it allow?

Hi BBers,
just me again!
I read over this forum the last few days, and got my email/facebook/msn question fixed via going back to the telstra shop and getting a BIS pack for $10/m along with my 1GB data included in my cap plan.
So all emails working well ...
My next question is ... what is the BIS pack, and what does it allow me to do/use? it was 530pm when the sales lady got to me, so she whipped it up on the computer, and sent me packing saying it will all be good in 20 mins .... no real detail except "unlimited email" ... but im sure the other sales person when I bought my phone said "apps, msn, facebook and stuff" were covered by the BIS plan.
So please help me!!!
I have WiFi at home, and can connect to it, but now I dont know when Im using it, or the data pack, or the BIS haha its driving me (and my husband) nuts!
Ok, wait for replies, thanks for all views/posts.
Heather

Hello,
FYI -- "here", as in these forums (which are targeted at BB/RIM services rather than carrier services), would not be the best place to find out something specific for one carrier. With so many thousands of carriers with dozens of different plans each, it's pretty much impossible to keep track of the specifics. The generic information is this:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
But, there certainly can be variations on that given the different packages carriers put together. I do suggest you do as JSanders recommended -- contact your carrier and find out what you've signed up for.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What is the best e-Sata PCI RAID card for Mavericks.

What is the best e-Sata PCI RAID card for Mavericks. Bought a new MAC PRO with Mavericks and the older PCI 1095,3124 that I used on older MAC Pro does not work. The MAC sees it, but the drivers never show up as being installed. If I could find drivers that work or a recommended PCI card it would be appreciated.
Thanks

PM made sense - 6 yrs ago when disk drives were much slower. Today it is a bottleneck.
SAS makes more sense. Outside of SSD, no disk drive maxes out by itself one PM interface (an SSD will) but it also means just two drives are enough to do so. So check out why to avoid PM:
www.macperformanceguide.com

What are the logical structure and physical structure in oracle

what are the logical structure and physical structure in oracle and how can allocate a DB block size as default size is 8192?

From the Concepts Guide
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm
The physical structures are:
Datafiles
Control Files
Redo Log Files
Archive Log Files
Parameter Files
Alert and Trace Log Files
Backup Files
The Logical Structures are:
Tablespaces
Oracle Data Blocks
Extents
Segments

What are the options "alert" and "passes" under my account info?

Hi guys, I was going on viewing my account info, and I happened to see some options which I have no idea what are their usage? Can someone tell me what is the option "passes" and "alert" for? Thank you

Passes will list any season passes you have purchased and still have some left to get.
Alerts is to notify you of new music from artists you select.
Go to the artist page in iTunes and scroll to the bottom and click on *Alert me*.

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

What are the different tools and techniques available to track analytics in SharePoint online 2013?

I want to know What are the different tools and techniques available to track analytics in SharePoint online 2013. Please provide your suggestions/ inputs. Thanks in advance.

you can Use the Web Analytics Integration app to
connect your SharePoint Online public website to third-party web analytics services, such as Webtrends, Google Analytics, Adobe, and so on.
Google Analytics
Webtrends for SharePoint
CARDIOLOG ANALYTICS
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What are the pro's and con's of the 4s?

I am not yet an owner of the 4s iphone. So what are the pro's and con's of owning the white 32gb iphone 4s? I have had the white 32 gb iphone 3gs for two years and until I get a job I will not be buying the 4s I so need.

Samplers do alot of things, what do you need a sampler for?
Korgs remind me of alot of presets and alot of verb and chorus. I guess if you're posting here you already have EXS and want more sounds or more functionality and if the korg thing is true you lean more to sampling/synthesis than instrument recreation (as in you probably aren't going for VSL if the korg caught your ear). Independence looks really cool, it's quite new. Kontakt is demanding and very flexible, both include huge libraries and I know kontakt has tons of great filters, FX, modulation. It also needs a pretty strong update-which is being dealt with after a year or so.

I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

Move iTunes from PC to MAC, http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

What is the recommended length of the cable in between the GPIB instrument and GPIB-USB card.

Similar Messages

Maybe you are looking for