What is the recommended method to sign out of Firefox?

I am new to Firefox. I just installed Firefox v 9.0.1. Is it recommended that I sign out of Firefox prior to clicking on the red 'X' button? I use Window 7 as my operating system.

No need to sign-out of anything. You can simply click the red x.

Similar Messages

  • What are the recommended methods to keep CA Certs and CRLs updated in Account Forests for a Cross Forest Enrollment implementation?

    Hello,
    We have 1 resource Forest and multiple account Forests. We've reviewed the Cross-Forest Cert Enrollment with Windows Server 2008 R2 doc and followed steps 8 and 9 under the 'Deploying AD CS for Cross Forest Cert enrollment' regarding publishing
    the root CA Cert and Enterprise CA certs.  We run PKISync.psi to copy objects from the resource to the account Forest, and understand Certs and CRLs are not copied from the resource to the account Forests.  We are trying to figure out the best way
    of keeping the Root and SubCA Certs and CRLs updated in the account Forests.
    1. Do folks simply copy the Root and SubCA Certs/CRLs from the resource forest into the account forests when they are renewed and then run the associated -Dspublish commands in the account forest?
    2. Any way for a CRL to be checked in the resource forest from a cert on a computer in the account forest?
    3. Any other suggestions/references regarding best practices on how to do this?
    Thanks for your help! SdeDot

    > Do folks simply copy the Root and SubCA Certs/CRLs from the resource forest into the account forests when they are renewed and then run the associated -Dspublish commands in the account forest?
    yes. Though, we do not bother with CRL copy as it published to HTTP location only.
    > Any way for a CRL to be checked in the resource forest from a cert on a computer in the account forest?
    I would suggest to not use LDAP URLs in favor to HTTP.
    Vadims Podāns, aka PowerShell CryptoGuy
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell File Checksum Integrity Verifier tool.

  • What is the best method to block out signatures?

    Hi
    Hopefully someone has some ideas on this.
    Basically my company needs to block out signatures and private information like telephone numbers in PDF documents which we publish on the web.
    We have been using the rectangle tool and 'lock' button to block out and lock the boxes so people with the Adobe reader can't read them. This isn't perfect because its like a new layer and when scrolling up and down the information behind the box is viewable for a split second. And even with the lock button ticked people with Acrobat Pro can still untick this and move the box. This can be fixed by password protecting the document but its a pain!
    Now we have a new problem. It seems these rectangle boxes don't appear on some third-party PDF viewing software. Namely the one on the iPad! People using iPads can see all private details we are publishing on the web!!
    Are there better ways to block out signature using Acrobat?? We are using Acrobat Pro 7. Since this problem arose out website has had to come down. Anyone got any ideas?
    Thanks for your help.
    Steve

    Also, the version you are using is so old that 1) it's not supported anymore and 2) most readers here won't know how it works.
    Redaction could be your solution, but the latest version does this better and differently.
    You can also certify the doc and lock it.
    Try creating signature appearances without personal info in it.
    Get a trial of Acrobat 10 and see if that's the way to go.
    Ben

  • What is the offline method of downloading and installing Firefox?

    I'd like to upgrade to the latest version of Firefox. The catch is, I only have a dialup connection, so online installation is not an option. It would take hours -- or even days. (And I'm charged by the minute.) Is there an offline way to install Firefox where I don't need to remain connected to the Internet? There used to be a manual download option for Firefox. That's how I obtained the version I have now. I used a public access place to download the executable file, took it home on my thumb drive, and then installed Firefox using this file. I looked around the site but couldn't find this manual download option anymore. Or am I missing something here? I'm sure there still are people like me out there. Any help would be appreciated. I'd really like to try the latest version. Thanks in advance.

    It does not download additional components, it contains all of the Firefox files.
    The Mac file is much larger because it contains the 32 bit and 64 bit versions of Firefox.

  • What is the recommended way to obtain tracking data from carriers post XSI

    We currently run an old version of SAP Business Connector. We are in the process of migrating all interfaces off BC onto PI. The one remaining interface we have problems is the XSI (Express Delivery Interface) interface we have with ECC06 and UPS via the BC server. The interface works but is not stable and we would like to decommission it if we are able.
    I'm not 100% clear but it appears that XSI is no longer the recommended solution for obtaining tracking data from carriers. What is the recommend method today? We'd be happy to use a PI or ABAP solution but would prefer a standard solution that was supported by SAP and UPS.

    Using Time Machine is the simplest way to back up.
    debasencio wrote:
    They don't fit on a standard data DVD and when I try to back it up to my 500GB external hard drive it says its not formatted to files that size.
    How is the drive formatted?
    If it's DOS/FAT32, you can only size file sizes up to 4GB.
    If you are using it on a Mac only, format it Mac OS X HFS+.

  • What is the recommended way of connecting to repository out of WebDAV, RMI, JNDI and JCA connector ?

    What is the recommended way of connecting to repository out of WebDAV, RMI, JNDI, and JCA connector possibilities provided by CQ 5.5?

    Hi dp_adusumalli,
    I recognized your list of ~8 questions you posted at around the same time, as I received that same list in our customer implementation from Arif A., from the India team, visiting San Jose. :-)
    I provided him feedback for most of the questions, so please check back with Arif for that info.
    For this particular question, can you provide specifics for the types of interactions you are interested in?
    Understanding the kinds of things you need to achieve will help determine which of the CQ/CRX interfaces is best suited for the task(s).
    I've collated a few points on this subject on this page:
    Manipulating the Adobe WEM/CQ JCR
    Regards,
    Paul

  • Whats the best method to cut out hair?

    Im using photoshop Cs4 - whats the best method to cut out hair from a background?

    I just had to do a quick search, because I was not sure when the Refine Edge was introduced, but it appears you do have it in CS4.  Check out this tutorial, but ignore all the stuff about paths.  Make a rough selection with Quick select - it shares a location on the tool bar with the Magic Wand, so don't confuse the two.
    Having made the rough selection, open Refine Edge.  I remember it took me a while to get the hang of it, but tutorials will help
    http://www.youtube.com/watch?v=bxKPUW1vYEg
    The above tutorial deals specifically with CS4.  This next one is probably the best real world use of Refine Edge I've seen, because it uses a difficult subject (as opposed to the easy selections so many tutorials fob you off with)
    http://www.youtube.com/watch?v=ssJRkbkHAa4

  • When exiting Yahoo sideshow the program will not go back to the Yahoo mail and drops out the sideshow for future use unless I sign out of Firefox completly and re-enter. What needs to be done to correct this problem?,

    Every time I use the sideshow feature of Yahoo Mail, it locks out the Yahoo Mail when I try to exit the sideshow feature and I have to sign completely sign out of Firefox to have the feature restored. Even using the refresh key, it removes this feature and causes it to act as though I am not authorized to view the feature. Is there something that I need to set?

    I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

  • What is the recommended way to do multiple channel, single point sampling for control with an NI PCI-6255 in RLP?

    Hello,
    I am writing a driver for the M-series NI PCI-6255 for QNX. I have downloaded the MHDDK and have all the examples working. I have also enhanced the examples to do interrupt handling (e.g. on AI_FIFO interrupt or DMA Ring Buffer interrupt). My ultimate goal is to write a driver that I can use for closed-loop control at 500 Hz using all 80 channels of the NI PCI-6255. I may also need to synchronize each scan with a NI PCIe-7841R card for which I've already written a driver. I want an interrupt-driven solution (be it programmed I/O on an interrupt or DMA that generates an interrupt) so that the CPU is available to other threads while the 80 analog inputs are being read (since it takes quite a while). I also want to minimize the number of interrupts. Basically, I will need to collect one sample from all 80 channels every 2 milliseconds.
    There are many different options available to do so, but what is the recommended technique for the NI PCI-6255 card? I tried using the AI FIFO interrupt without DMA, but it seems to interrupt as soon as any data is in the AI FIFO (i.e. not empty condition), rather than when all 80 channels are in the FIFO, so more interrupts are generated than necessary. I tried using DMA in Ring Buffer mode to collect a single sample of 80 channels and interrupting on the DMA Ring Buffer interrupt, which appears to work better except that this technique runs into problems if I cannot copy all the data out of the DMA buffer before the next AI scan begins (because the DMA will start overwriting the buffer as it is in ring buffer mode). If the DMA is not in ring buffer mode or I make the ring buffer larger than one 80-channel sample then I don't have a way to generate an interrupt when one sample has been acquired (which I need, because I'm doing control).
    I saw something in the documentation about a DMA Continue mode in which it looks like you can switch between two different buffers (by programming the Base Count/Address with a different address than the current address) automatically and thereby double-buffer the DMA but there is no real documentation or examples on this capability. However, I think it would work better than the Ring Buffer because I could interrupt on the DMA CONT flag presumably and be copying data out of one buffer while it is filling the other buffer.
    Another option would be DMA chaining, but again, I cannot find any information on these features specific to the NI DAQs.
    I tried interrupting on AI STOP figuring that I could get a single interrupt for each scan, but that doesn't appear to work as expected.
    I know that DAQmx on Windows has the ability to do such single sample, multiple channel tasks at a fixed rate so the hardware must support it.
    Any suggestions would be appreciated.
    Thanks.
    Daniel Madill

    Hello,
    The interrupt that will happen nearest the times that you need is the AI_Start_Interrupt in the Interrupt_A group. This interrupt will occur with each sample clock. By the second time this interrupt fires, the AI FIFO should have the samples from the first conversion. If it is easier to use programmed IO, you can read the samples out of the FIFO until you get all 80.
    Additionally, you can set the DMA to send samples as soon as the FIFO is no longer empty...instead of waiting for half full or full. This change will reduce latency for your control loop. You can set AI_FIFO_Mode in AI_Mode_3_Register to 0. By the second time this interrupt fires, you should be able to check how much data is in the DMA ring buffer and read the 80 samples when they are available. You can make the ring buffer larger than 80 samples if you see data getting overwritten.
    There is no interrupt associated with 80 samples being available in the FIFO or 80 samples being available/transferred by DMA to the host. X Series has much more flexibility with these interrupts.
    I hope this helps!
    Steven T.

  • What is the best method of backing up my digital files (catalog) in the Photoshop Elements Organizer

    What is the best method or service for backing up my digital files (catalog) in the Organizer from Photoshop Elements 12. Since there no longer is  the automatic  Elements sync available I do not know what to choose. I have tried to back this up using my external drive, but I cannot find the digital images per se. I see the entire program but not the catalog of pictures. Also, I have a windows operating system and Adobe  Revel offers no edit capabilities with this OS.

    I'm in a similar situation including movies I've purchased from iTunes...
    Here's my setup:
    I have all my iTunes data (music, movies, etc.) as well as about 10 GB of photos stored on a nework storage device that uses RAID-5 with SATA disks. This is basically a little toaster-sized NAS machine with four hard drives in it (www.infrant.com). If one of these drives dies, I get alerted and can insert a new one without missing a beat since the data is stored redundantly across all drives. I can also just yank out any one of the four drives while the thing is running and my data is still safe (I tried this after I bought it as a test).
    That's how I prevent problems with a single disk... Redundancy
    Now onto "backups"...
    Nightly, my little RAID toaster automatically backs itself up to an attached 250GB USB drive. However, these backups are only of my critical data... documents, photos and home movies... I don't bother backing up my "Hollywood" movies since I can live without them in a disaster.
    ... I actually don't permanently store anything I care about on a laptop or a desktop. It all goes on the NAS box (Network Sttached Storage) and then my other computers use it as a network drive. It's attached via Gigbait to my main computer and via wireless to most everything else.
    My achilles heel is that I don't store anything outside of my house yet. If I was smart, I'd alternate two USB drives attached to my NAS box and always keep one of them somewhere else (Safe Deposit Box?).
    ...and that's just one way to do it.
    -Brian

  • What is the recommended way to upgrade system ruby and python binaries and their libraries?

    I'd like to upgrade my system ruby to 1.9.2 instead of old 1.8.7. Also was wondering what's the recommended way of upgrading any scripting languages installed on system?

    Hi Sogaard,
    see below:
    How does SAP recommend to integrate Webi-report in the SAP Portal? Is it through an URL iview, the iview templates (thumbnail, folder and alert) or through the Master Iview?
    The sample iViews are just samples for a particular case. The iView template allows you to use any application on the BusinessObjects system - including the viewing of content. What you are looking for is the creation process for WebI. So you have 2 options: you can use the KM integration and you can build a java application that offers the workflow you looking for and integrate it with the iView template
    Depending on what method should be used, I'd like to know which settings to be focused on. For instance, if the Master Iview is to be used, should opendocument be used instead of reports? And what other customizations will have to be done in order to integrate a Webi-report instead of a Crystal-Report?
    OpenDocument is for viewing reports. The Installation Guide outlines the integration of the iView template and the KM part.
    What is the intended use for the BOBJ repositoy manager? Would that be the way to integrate the Info-view?
    This is the integration into the KM repository which provides a richer functionality then just an iView.
    Ingo

  • What's the recommended guideline on backing up a recovery catalog?

    while I understand "Benefits of Using the Recovery Catalog as the RMAN Repository" as stated in
    http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmquick.htm#442214
    as well as things to take note if using control file as the sole rman repository,
    as stated in "Monitoring the Overwriting of Control File Records" in http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmrepos.htm#446924
    I do not understand why in Backup and Recovery Advanced User's Guide
    http://download.oracle.com/docs/cd/B14117_01/server.101/b10734/rcmrepos.htm
    "Back Up the Recovery Catalog Often"
    Even if you have to restore the recovery catalog database using a control file autobackup, you can then use the full record of backups in your restored recovery catalog database to restore the target database without using a control file autobackup for the target database.
    =>probably implies that we can use another recovery catalog let's call it backupbackup to restore the recovery catalog
    "Choosing the Appropriate Method for Physical Backups"
    Follow these guidelines when developing an RMAN backup strategy for the recovery catalog database:
    * Run the recovery catalog database in ARCHIVELOG mode so that you can do point-in-time recovery if needed.
    * Set the retention policy to a REDUNDANCY value greater than 1.
    * Back up the database onto two separate media (for example, disk and tape).
    * Run BACKUP DATABASE PLUS ARCHIVELOG at regular intervals, to a media manager if available, or just to disk.
    * Do not use another recovery catalog as the repository for the backups.=> this contradicts the previous statement
    * Configure the control file autobackup feature to ON.
    so may I know what's the recommended guideline on backing up a recovery catalog? should we use another recovery catalog to keep the rman repositories of the the main primary catalog or just use a control file autobackup feature?
    thanks

    I understand the question and the confusion.
    Please note, however, that this forum is for discussing problems and errors with the documentation in general. Your question is related to a specific product and is, as far as I can tell, not a note about a documentation error or a correction.
    The appropriate place to discuss this is the Database (General) forum or - perhaps surprisingly - the RMAN forum. These can both be found by
    1) Clicking on the 'Forum Home' link at the top of this page;
    2) Scrolling down to the category 'Database' (a category is identified by a special row format that does not list the number of topics)
    3) Expanding the category by clicking on the 'More ...' link.
    4) Scrolling down to the "Database - General" or "Recovery Manager" forum and clicking on it's link.
    Note that forums have a search function that may be used to find answers if someone has already asked a similar question.

  • What is the best method for moving iTune Libraries from Old to New Computer

    Hello,
    Thanks in advance for any assistance you may offer.
    My Sony Vaio Desktop recently died and untimely death, so I just purchased an HP Notebook. I was trying to wait out the release of the possible update of the Macbook line. However the old computer didn't agree. This HP will tie me over till a new release.
    I've been doing weekly backups for over 3 years with a backup drive from Western Digital. At this point I just want to transfer my music in iTunes and applications from the App store that are loaded on to my iPod Touch into the new computer and then reauthorize and sync.
    My question is what's the best method. Oh another problem I'm having includes the latest iPhone & iPod Touch software problem of 3rd party apps not working along with the vanishing of my music on the Touch.
    Any guidance would be much appreciated.

    Open up a fresh copy of iTunes. Point iTunes in the direction of your Western Digital Harddrive. Import Folders.
    1. New Copy
    2. Edit -> Preferences -> Advanced -> General -> Change -> <the address of the iTunes library on WD>
    3. File -> Add Folder to Library -> <Select iTunes folder on WD>
    Always keep a backup of your iTunes Library file and the iTunes XML Document. If you have those, then it might be just as simple as copying those to your iTunes file folder. If you are not sure where they are, then do a search for iTunes.xml.

  • What is the best Method to transport KMC from DEV to QA & PROD

    We are trying to figure out what is the best method to transport KMC from DEV to QA & PROD. Your help and feedback is greatly appreciated.
    David

    hi,
    Refer this thread.
    How to transport KM content and configration?
    Regards,
    Ganesh N

  • What is the recommended set up for Final Cut Pro re: Scratch Disks etc

    What is the recommended set up for Final Cut Pro with regards to Scratch Disk etc.
    I have a lot of projects and at the moment they are all over the place on various external HDDs etc.
    I just bought a new Firewire 800 External HDD and want to get everything straight but I'm not quite sure where to start...
    Any advice would be appreciated.
    Thank You

    Media Manager (available from the File menu bar item) will consolidate all elements of your project together with a linked copy of the project file to a single folder in a location of your choice. There are various options to leave out unused footage, include handles etc. Safest way is to copy the files. Delete the originals when you are sure the copy works.
    The user manual has a detailed description of how MM works.

Maybe you are looking for