What is the recommended way to connect my iMac to Fedora

Hello,
Ever since the OSX 10.8.2, NFS has vanished so I can't connect to Fedora where I have an NFS server.
So what is the best way to set up Fedora to connect to an iMac.
I don't want to have to continue to connect by going to "Finder -> Connect to Server" every single morning.
Thank you,
Kris

Hello Kris,
Easy way...
http://www.bresink.com/osx/NFSManager.html
Other ways...
http://www.cyberciti.biz/faq/apple-mac-osx-nfs-mount-command-tutorial/
http://wiki.xbmc.org/index.php?title=NFS

Similar Messages

What is the recommended way of connecting to repository out of WebDAV, RMI, JNDI and JCA connector ?

What is the recommended way of connecting to repository out of WebDAV, RMI, JNDI, and JCA connector possibilities provided by CQ 5.5?

Hi dp_adusumalli,
I recognized your list of ~8 questions you posted at around the same time, as I received that same list in our customer implementation from Arif A., from the India team, visiting San Jose. :-)
I provided him feedback for most of the questions, so please check back with Arif for that info.
For this particular question, can you provide specifics for the types of interactions you are interested in?
Understanding the kinds of things you need to achieve will help determine which of the CQ/CRX interfaces is best suited for the task(s).
I've collated a few points on this subject on this page:
Manipulating the Adobe WEM/CQ JCR
Regards,
Paul

HT5304 what is the best way to connect my imac wireless with airport express or directly plugged into airport unit

what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks

Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling

For optimal sound, what is the best way to connect an iMac to a high end stereo system?

If the answer is wired rather than through an Airport Express, what is the best way to wire an iMac to a good stereo? Is there any way to do it other than through the headphones out jack?

Morning Acousticare,
Thanks for using Apple Support Communities.
Thunderbolt cables should not exceed three meters for maximum performance. The Apple Thunderbolt to Thunderbolt cable (2.0 m) is two meters in length.
For more information on this, take a look at this article:
About Thunderbolt to Thunderbolt cable (2.0 m)
http://support.apple.com/kb/HT4614
Hope this helps,
Mario

What's the best way to connect two imac's with shared internet connection?

Hi
I plan on purchasing a new iMac (likely 2.4 GHz Intel Core Duo - 20 inch, probably will have leopard) and would like to set it up so I can share files and internet connection with my older iMac (1.25 GHz Power PC G4, 768 MB DDR SDRAM, using Tiger Version 10.4.11). I plan on using the Airport Extreme Base Station. I have a exterior cable modem for high speed internet through Shaw (internet provider) and my ethernet connection is through that.
I've heard a few things about this set up, but there are mixed reviews on everything. Would it be better to connect the Airport Base Station to my older iMac and then connect to the internet wirelessly through my new iMac or vice versa? I've heard some of the older iMac's have slow Airport Cards so thinking maybe should use my new iMac for wireless. One computer will be upstairs and the other downstairs.
There must be a few people out there who've done this, so any assistance would be great. Thanks for your help.

Would it be better to connect the Airport Base Station to my older iMac and then connect to the internet wirelessly through my new iMac...
Yes
This would allow the old iMac to use a 100 Mbps Ethernet connection while the new iMac can use a 802.11n wireless connection.
The old iMac only has 802.11g (54 Mbps) wireless capability.

What is the best way to connect my new MBP to monitor - DVI, VGA or HDMI

What is the best way to connect my new MBP to a computer monitor? DVI, VGA or HDMI? Thanks

I recommend the Apple MiniDisplay Port to DVI adaptor. I would avoid VGA. MiniDisplay Port to HDMI will work as well (3rd party).
http://www.apple.com/search/?q=dvi%20adaptor&section=mac&geo=us

What is the recommended way for persisting JMS messages?

What is the recommended way for persisting JMS messages?. As per the IMQ admin documentation , using the default built-in persistence type which is through unix flat files is much efficient and faster, compared to the database persistence .
Tried setting up the jdbc stuff for database persistence on iAS 6.5 . I am getting the following
error .
[24/Apr/2002:16:09:20 PDT] [B1060]: Loading persistent data...
[24/Apr/2002:16:09:21 PDT] Using plugged in persistent store: database connection
url=jdbc:oracle:thin:@dbatool.mygazoo.com:1521:qa1 brokerid=ias01
[24/Apr/2002:16:09:23 PDT] [B1039]: Broker "jmqbroker" ready.
[24/Apr/2002:16:11:56 PDT] ERROR [B4012]: Failed to persist interest
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Response%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0AisReadonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_Response%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
java.sql.SQLException: ORA-01401: inserted value too large for column
[24/Apr/2002:16:11:56 PDT] WARNING [B2009]: Creation of consumer SM_Response to destination 1
failed:com.sun.messaging.jmq.jmsserver.util.BrokerException: Failed to persist interest
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Response%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0AisReadonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_Response%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
java.sql.SQLException: ORA-01401: inserted value too large for column
Any thoughts?

From the output, you are using imq 2.0. In that release
the key used to persist a durable subscriber in the database
table has a limit of 100 characters. The output shows that
your value is:
SystemManager%3ASystemManagerEngine%2BiMQ+Destination%0AgetName%28%29%3A%09%09SM_Res
ponse%0AClass%3A%09%09%09com.sun.messaging.Topic%0AgetVERSION%28%29%3A%09%092.0%0Ais
Readonly%28%29%3A%09%09false%0AgetProperties%28%29%3A%09%7BJMQDestinationName%3DSM_R
esponse%2C+JMQDestinationDescription%3DA+Description+for+the+Destination+Object%7D:
which is much longer than 100 characters.
You might want to shorten the string you use for the
durable name.
And yes, the default file-based persistence store is
more efficient when compared to the plugged-in persistence
through a database.

What is the best way to connect a firewall cluster to a VPC domain

Hi All
Can anyone help me decide what is the best way to connect a firewall cluster to a VDC running in a pair of N7K's which is a VPC domain?
Can I configure a VLAN interface on each VDC and use HSRP? I was planning on presenting one 10GB cable from each VDC to each firewall. Would this work OK? HSRP traffic will go across the VPC peer link correct?
thanks all

No, but the one caveat is vpc orphan ports. If the vpc link between the nexus switches fails for any reason, all the vpc ports on the vpc secondary switch will be forced down. So it's recommended to connect single port devices to the primary vpc switch so the connections stay up. But if you're ok with that, then I don't see any problems.
You have a few options, one would be to run a separate link between your nexus switches for non-vpc vlans. These vlans would not be allowed over the vpc peer-link, or forwarded out vpc's.
See here page 49 :
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf

What is the best way to connect a MacBook Pro to my HiFi system ?

Hi,
I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5 CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ?
I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
Thanks in anticipation of some advice.

What is the best way to connect a MacBook Pro to my HiFi system?
Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
The Mac's analog audio in/out ports doubles as a optical in/out ports.
The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

What's the best way to connect the audio out of my Mac to my stereo receiver?

I want to listen to my mp3 collection through my home theatre stero receiver.
I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
I even hear these flaws when I listen to headphones through the headphone out of my mbox.
Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
I got this one from monster thinking it should work. No dice.
So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
Why might I be getting these clipping distoritons?
any advice would be fantastic

It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
http://www.apple.com/itunes/airplay/
I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
http://www.apple.com/airportexpress/
You can even find refurbished ones on Apples website for about $79.

What is the right way to connect the adapter to my macbook when charging?

what is the right way to connect the adapter to my macbook when charging.
is it connect the magsafe connector first before plugging the adapter to the outlet? or the way around? or both ways will do?
what if i'm using a surge protection with a on/off button, can I just turn the surge protector extension on and off without disconnecting the magsafe connector and adapter plug from my laptop when i'm not using it?
thank you very much

If there is any arcing it may be because the adapter is dirty. It is best to plug in the wall wart then attach the magsafe to the MacBook. As GfulDedFan mentioned this reduces the chance of power surging the MacBook. I have done mine this way since he day I bought it and have never had an arc. I keep it clean to reduce the chance of this happening. The following will help in the care of your supply.
Apple: Use and cleaning of MagSafe power connector

What is the recommended way to upgrade system ruby and python binaries and their libraries?

I'd like to upgrade my system ruby to 1.9.2 instead of old 1.8.7. Also was wondering what's the recommended way of upgrading any scripting languages installed on system?

Hi Sogaard,
see below:
How does SAP recommend to integrate Webi-report in the SAP Portal? Is it through an URL iview, the iview templates (thumbnail, folder and alert) or through the Master Iview?
The sample iViews are just samples for a particular case. The iView template allows you to use any application on the BusinessObjects system - including the viewing of content. What you are looking for is the creation process for WebI. So you have 2 options: you can use the KM integration and you can build a java application that offers the workflow you looking for and integrate it with the iView template
Depending on what method should be used, I'd like to know which settings to be focused on. For instance, if the Master Iview is to be used, should opendocument be used instead of reports? And what other customizations will have to be done in order to integrate a Webi-report instead of a Crystal-Report?
OpenDocument is for viewing reports. The Installation Guide outlines the integration of the iView template and the KM part.
What is the intended use for the BOBJ repositoy manager? Would that be the way to integrate the Info-view?
This is the integration into the KM repository which provides a richer functionality then just an iView.
Ingo

What is the recommended way to truncate tables in ODI?

I want to create a separate step to truncate the result tables, before the start of the actual job. What is the recommended way of doing this?
I am currently putting the truncate statements in the ODI procedure, but that has a lot of typing. Is there a odi command in the toolbox that I can use?
Thanks.

Ok,
If the table will be loaded by interfaces, you have the "Truncate" option at the IKM's, just change it to "Yes".
If you need to Truncate but they won't be loaded by Interfaces a possible way is:
- requirements: it will be necessary to have some common "string" at tables names.
1) create a procedure
2) create an step
3) at source tab put:
Select table_name from user_tables where table_name in '%THE_STRING%'
4) at target tab put:
Truncate table #table_name
If you don't have a common "string" you, instead, can create a table with all table names that you need to truncate and change the select command at 3).
Does it help you?
Message was edited by:
Cezar_Santos

What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

If you want to connect 2 Displays you must do it one with the Minidisplayport and one by HDMI if you have a Retina 13 Inch. i think the old MBP doenst have HDMi Out

What is the best way to connect MBP 13" - (non retina) to HDMI TV input

What is the best way to connect MBP 13" late 2012 - (non retina) to HDMI TV input
...To get Video and Audio? With one cable ...
I'm seeing that the "rocketfish" adapter is not handling the job (from these forums).
I enjoy watching youtube videos, hulu, etc on the big screen through my laptop. The other Windows laptops I'ved had from Sony, HP, Dell, all had HDMI and was easy peasy.
I don't have the patience to buy and return 10 different types of adaters (nor would Best Buy appreciate that)
Thank you!

Look for something like this:
http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADY9 I/ref=sr_1_6?ie=UTF8&qid=1356715728&sr=8-6&keywords=cable+displayport+to+hdmi
Ciao.

What is the recommended way to connect my iMac to Fedora

Similar Messages

Maybe you are looking for