What is the Relationship ID to find employee line manger and his subordinate?

Dear Experts,
1.Can you suggest FM - where using particular employee Position ID can we pull out his line manger and subordinate and also provide the relationship code to get the detail of line manager and subordinate.
2.For eg say employee position ID -30000019 what input i should give in table HRP1001 to get his line manager & subordinate .
Regards
Vinodh

Hi Vinodh,
You should get that below is the process
Click on the Details View/Edit and enter the below data
Note: you need to enter the position number of the Manager who has sub ordinates.
Output if you click on 16 Entries view.
If you are question is answered please close the thread by marking as Correct Answer.
Regards,
Mohsin.

Similar Messages

What is the difference between Service Edge Optimized line cards and Packet Transport line cards in the ASR 9000

Hi Folks,
What is the deep dive difference between the service edge optimized cards and the packet transport line cards in the ASR 9000?
I know that QoS is the difference in general, for example, the service edge optimized has advanced QoS features while the Packet Transport line cards has basic QoS features but I want to know some more details please.
Thanks

There are four main deiffences (unfortunately don't have a reference link).
L3 Interfaces:
TR: 8k/LC, SE: 20k/LC
L2 Interfaces:
TR: 16k/LC, SE: 64k/LC
QoS:
TR: only 8 Queues per port, 8k policers per Network Processor
SE: 256k Queues per port, 256k policers per NP
ACL:
TR: 24k ACE
SE: 96k ACE
Number of FIB/mFIB/MAC etries, L3 VRFs, PWs available per TR/SE linecard are the same.

What is the difference between Glen Campbell's 99¢ song and his $1.29 song?

Glen Campbell has a song on the iTunes store, in the same album, called "I'm Not Gonna Miss You."
The album is "I'll Be Me" and the opening and closing songs are the same name, songs number 1 and 10.
Song number 1 lists the artists as "Glen Campbell and The Wrecking Crew" and number 10 lists the artist as Glen Campbell.
The song Previews sound very similar.
This question, I guess, is for the musicologists out there…does anyone know what the difference is between the two songs? Do they sound the same? Bit-rate? Artists?

Bob,
Yes that is a bit of an oddity.
Those two tracks are listed (and priced!) that same way at Amazon Digital Music.
The Wrecking Crew was his well-known backing band of session players. They wouldn't normally get this kind of billing.
This is somewhat of a guess, but they may have doubled up the track based on its unprecedented popularity. Here is some info:
"I'm Not Gonna Miss You" has over 7 million views on YT as of this review date. Obviously, it is a song that has resonated with many people. From Big Machine Label Group: "I'm Not Gonna Miss You" is the heart-breaking final song of a career that's spanned pop, country and adult contemporary. A heart-tugging portrait of what it means to recede into Alzheimer's, buoyed by the Beach Boys' harmonies and anchored by the echo-of-time piano chords, is an acknowledgement of the reality to come. Unflinching in its recognition of what's lost, an elegiac dignity to being honest about the numb fills the void of memory.
Anyway, if you only want one, buy the 99 cent one!
(Forgot to add: They are definitely the same bitrate. All songs sold in the iTunes Store are in AAC/256 format.)

The relationship between SAP BusinessObjects XI 4.0 and WebIntelligence 6

A lot of APIs in Rebean\ Report Engine Java SDK are disfunctional in BI 4.0 and there is no replacement.
[Rebean Developer Guide|http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_resdk_java_dg_en.pdf] say:
SAP BusinessObjects XI 4.0 release, the Report Engine SDK does not support the following features:
u2022 Drilling in Web Intelligence documents
u2022 Building queries
u2022 Document and report editing
in [BI 4.0 Javadoc|http://help.sap.com/javadocs/bip/40/re/en/com/businessobjects/rebean/wi/package-summary.html]
there are a lot of javadoc with warning Warning: This interface is no longer functional from the SAP BusinessObjects XI 4.0 release onwards
I found another [Java doc for WebIntelligence 6.x|http://help.sap.com/javadocs/boe/xi/re/en/overview-summary.html].
http://help.sap.com/javadocs/boe/xi/re/en/overview-summary.html
This documentation covers the REBean Java SDK. The REBean SDK allows you to work with ** documents and explore the metadata layer.
not supported by 4.x,but supported by 6.x?
what's the relationship between SAP BusinessObjects XI 4.0 and WebIntelligence 6.x?
What version of WebIntelligence used by SAP BusinessObjects XI 4.0 ?

Web Intelligence 6.x is an old product that is currently out of support.
Crystal Enterprise 10 and BusinessObjects 6.5 were the last separate Crystal / Web Intelligence products just after BusinessObjects acquired Crystal Decisions. BusinessObjects XI was the successor to both CE 10 and BO 6.5.
It just so happens that the product name was carried over from the BusinessObjects side, but the versioning brand was carried over from the Crystal side. So 6.x doesn't mean a newer version of ReportEngine. Timeline:
ReportEngine 6.x -> ReportEngine 11 (XI R1) -> ReportEngine 11.5 (XI R2) -> ReportEngine 12 (XI 3.x) -> ReportEngine 14 (BI 4.x).
So you can see the evolution of the branding that led to the newest version being branded by the number 4.0.
The internal APIs being wrapped by ReportEngine was changed from 12 to 14, and thus not all functionality was carried over to 14.
Sincerely,
Ted Ueda

What is the relationship between the SAP BC and XI?

Hi Friends,
What is the relationship between the SAP BC and XI?
Regards
Sam

Hi Samuel Melvin ,
The SAP BC is basically WebMethod's product supplied free of charge to SAP customers.
SAP XI is a purchased product from SAP that can be used to integrate multiple systems, you would need to contact your SAP Account rep to discuss licensing issues. You cannot download it for free from sapnet.
It is probably more relevant to discuss the comparison between these solutions based on a specific scenario, but here are some basic differences. Obviously, the foremost one being that the SAP Exchange Infrastructure (XI) belongs to the SAP Netweaver technology suite, whereas Business Connector although bundled by SAP is really a Integration tool provided by Web Methods.
Being a Netweaver solution the SAP XI is central in design and configuration. The SAP XI is really integrated as a required solution for some of new mySAP solutions like SRM. For example, the mySAP SRM business scenario for Supplier Self Services in EBP requires the implementation of SAP XI, the Business connector cannot be utilized to replace this scenario. Although the SAP Business Connector can still be utilized with SRM for all XML based communication. Both mySAP SRM and XI runs natively on the SAP WebAS Server.
The Business Connector is a point to point solution that provides messaging and routing. Currently a number of organizations using the Business Connector utilize it to communicate between its partners using XML based messaging. This can be achieved using SAP XI as well, but SAP's strategy is to utilize XI as a central hub for messaging, routing, and communication between all SAP, non-SAP systems as well as partners. As SAP XI is a relatively new solution, organizations that are looking for communicating with their partners to exchange XML based documents or other point-to-point scenarios can still utilize SAP Business connector.
Initially, when SAP announced the SAP XI, there was a notion that SAP Business Connector would be phased out and SAP XI would be the solution utilized hereon. But SAP will continue to support the Business Connector, the SAP Exchange Infrastructure will remain as the SAP's strategic integration solution. All new and or updated SAP solutions will make use of the XI for all process-centric, message based integration. As upgrades are scheduled and new solutions deployed we'll see the mandated need for XI but currently the only solution that natively requires SAP XI is mySAP SRM 2.0.
It will be interesting to see how organizations that already utilize SAP Business Connector warm up the SAP XI idea. But for the most part they will not have a choice really, as the new mySAP products are going to natively require the use of SAP XI for all process-centric integration between the different SAP solutions. But there is no reason why organizations cannot continue to utilize the SAP Business Connector for all point-to-point solutions already deployed with possibly document exchange and partner integration. Hope this helps.
These web-sites may help u in understanding XI & BC
Understanding SAP XI SEEBURGER
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
http://www.t2b.ch/Flyers/t2b%20SAP%20Xi%20Flyer.pdf
SAP Exchange Infrastructure (BC-XI)
http://help.sap.com/saphelp_srm30/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/content.htm
webMethods for SAP
http://www1.webmethods.com/PDF/webMethods_for_SAP-wp.pdf
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
cheers!
gyanaraj
****Reward points if u find this helpful

Re: What is the relationship between the JTA Server Timeout and

Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          -- Rob
          Tom Gerber wrote:
          > What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          >
          > Does the EJB's timeout have to be >= the servers to take effect?
          >
          > We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          >
          > Is this correct behavior?
          >
          > We are on WL 6.0 sp1
          >
          > Thanks
          >
          > Tom


Sorry, you cannot query for known bugs yet.
          Work is in progress :)
          Kumar
          Tom Gerber wrote:
          > Is there a place on the WebSupport site for WebLogic that I can query
          > for know issues for WL 6 sp1?
          >
          > I tried the Find Solutions but didn't find much.
          >
          > Thanks
          >
          > Rob Woollen wrote:
          >
          > > Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          > >
          > > There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          > > change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          > >
          > > -- Rob
          > >
          > > Tom Gerber wrote:
          > >
          > >> What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          > >>
          > >> Does the EJB's timeout have to be >= the servers to take effect?
          > >>
          > >> We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          > >>
          > >> Is this correct behavior?
          > >>
          > >> We are on WL 6.0 sp1
          > >>
          > >> Thanks
          > >>
          > >> Tom
          > >

What is the best way to find a file on the servers disk without using web.xml?

          What is the best way to find a file on the servers disk without using web.xml?
          I want to find a configuration file not contained within the war file I have
          created. Is there a way to pass information into the ServletContext with out
          rebuilding the ear or war files? Tomcat 4.0 can do this in its server configuration
          files. Does BEA have the equivalent?
          Regards,
          Eric


You can specify the path to the file as a system property
          eg
          java -Dconfig.file.location=./mydirecotry/myfile.txt com.test.MyApp
          "Eric White" <[email protected]> wrote in message
          news:[email protected]..
          >
          > What is the best way to find a file on the servers disk without using
          web.xml?
          > I want to find a configuration file not contained within the war file I
          have
          > created. Is there a way to pass information into the ServletContext with
          out
          > rebuilding the ear or war files? Tomcat 4.0 can do this in its server
          configuration
          > files. Does BEA have the equivalent?
          >
          > Regards,
          > Eric

What is the system variable to find the name of the current window in S.F

hi
what is the system variable to find the name of the current window in S.F

Hi ,
SFSY_PAGEWINDOW
regards,
Prashant

Please explain what are the various procedures to find user-eixts

Hi,
Please explain what are the various procedures to find user-eixts ?
Ramana

Hi,
1. By executing this Program.
*& Report ZFIND_EXIT
REPORT ZFIND_EXIT.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
2. . Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
3. 1. in se11, goto table MODSAP
View table contents
in Type field, enter
'E' (for user exit / Function Exit)
OR 'S' (for screen exit)
4. Calling Customer- fucntion in Main Program
Thanks,
Anitha

What is the relationship between them?

What is the relationship between the following concepts ?
Java perssitence entities
Coherence caches
Database tables
Which one can best represents database tables ?

qkc wrote:
What is the relationship between the following concepts ?
Java perssitence entities
Coherence caches
Database tables
Java persistence entities are usually stored in database tables.
Coherence caches may or may not have a relationship with Java persistence entities. If you use a JpaCacheStore then your entities are mapped to cached values with the primary key of the entity serving as a cache key.
Which one can best represents database tables ?Of course database tables can represent database tables the best.
Best regards,
Robert

What is the best method for finding duplicates in iPhoto?

What is the best method for finding duplicates in iPhoto? I would like them identified and then prompted to delete or not.

iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - , duplicate annahalitor, Decloner
LN

There are way too many photos on my internal hard drive. I have older libraries, and newer libraires in iPhoto and Aperture 2. What is the best way to find and reduce the number of duplicate photos/libraries before upgrading to Aperture 3?

There are way too many photos on my internal hard drive. I have older libraries, and newer libraires in iPhoto and Aperture 2. What is the best way to find and reduce the number of duplicate photos/libraries before upgrading to Aperture 3?

Sharon-
Good idea.
Back up first.
I would probably wait for the merge function of the latest version before merging. Be sure to verify every merge.
Merge Libraries, then from within Aperture move images to referenced on external hard drives.
HTH
-Allen

What is the best way to find the size of files?

What is the best way to find the size of my files?

Select a file or folder in the Finder and choose Get Info from the File menu.
(125056)

What is the relationship between BASIS and XI?

what is the relationship between BASIS and XI?
whether we have to acquire knowlege to explore BASIS for XI

HI Gabriel
BASIS is the administration of SAP system, BASIS team will be responsible for installation, maintenance, transport, authorizations in the SAP system.Taking care of the Server in all the situation,applying Support Packages, patches,fixes, Monotioring the Jobs.Participate in requirements gathering, assessment, design, configuration and testing activities for SAP security and other issues
XI is also a middleware.
The work of XI Basis starts from installation of XI server and it inculdes many system related things such as Installing Adapter framework, Maintaining RFC connections, Roles and Authorization, Updating Patches etc....
Check this link on Management of XI and go through it completely. You will ahve clear idea about the role performed by XI Administrator or XI Basis:
http://help.sap.com/saphelp_nw04/helpdata/en/a3/c6d931767dbb4d8a2696b9c72431a9/content.htm
Also refer this thread on XI Basis work:
Basis activites for XI
Cheers..
Vasu
<b>** Reward Points if found useful **</b>

What is the relationship between CGI-Executables and cgi-bin?

I am trying to get CGIs working locally on my Mac and am having difficulty understanding the relationship between CGI-Executables/ and cgi-bin/.
I have activated CGI in my httpd.conf file, and have the following perl test script: /Library/WebServer/CGI-Executables/test.cgi file, and have the file permissions set appropriatly
If I call the script from the actual url: http://127.0.0.1/CGI-Executables/test.cgi, it doesn't work. If I use: http://127.0.0.1/cgi-bin/test.cgi, it works fine.
Why cgi-bin and not CGI-Executables? What is the relationship between /Library/WebServer/CGI-Executables/ and cgi-bin?
And how do I get CGIs working in individual users' Sites/ file? Do all CGIs go in the /Library/WebServer/CGI-Executables/ directory, or can each users' Site/ directory have it's own cgi-bin?
Ti Powerbook G4 Mac OS X (10.4.4)

Now I am having trouble getting CGI to work in the user directories. I have a perl script that works for 127.0.0.1/cgi-bin/test.cgi, but not for 127.0.0.1/~joe/cgi-bin/test.cgi.
My apache error log says:
[Tue Feb 14 08:14:23 2006] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: /Users/joe/Sites/cgi-bin/first.cgi
Permissions for Library/WebServer/CGI-Exectuables/test.cgi and /Users/joe/Sites/cgi-bin/ are 777.
I think the problem is somewhere in my directory configs. Apache has so many, it's hard to know what's what.
Here's the first directory directives in httpd.conf:
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride Options
</Directory>
Farther down, there's this, which I added ExecCGI and index.cgi:
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /Users/*/Sites>
AllowOverride FileInfo AuthConfig Limit
Options MultiViews Indexes SymLinksIfOwnerMatch Includes ExecCGI
DirectoryIndex index.html index.cgi
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
Then down at the bottom of the file is something I suspect was added automatically when the user account was created:
Include /private/etc/httpd/users/*.conf
<Directory "/Users/joe/Sites/">
Options Indexes MultiViews Includes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
To further confuse things, there is another file /etc/httpd/user/joe.conf that has additional user-directory directives:
<Directory "/Users/joe/Sites/">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Is there something in all these directory configurations that is preventing the user from accessing cgi-bin? Can I add directives to an .htaccess file in the user directory.
Ti Powerbook G4 Mac OS X (10.4.4)

What is the Relationship ID to find employee line manger and his subordinate?

Similar Messages

Maybe you are looking for