What is the Render option in 3D for?

The images look the same to me before and after the render and it takes a long time to complete. Want is the reason for using this tool?

Rendering produces the highest quality version for output e.g. for web, print or animation projects.
This help document has further information:
https://helpx.adobe.com/photoshop/using/3d-rendering-saving-photoshop-extended.html

Similar Messages

  • What is the best option to get a wireless connection please?

    Hi, I have a 1.6 GHz G5 with Tiger (soon to install Leopard).
    I currently have broadband through an ethernet cable but I want to set up wireless. My understanding so far is that I need either an airport card or an external device such as airport express (in the system profiler it says no info found under AirPort card).
    Can someone please tell me if I am correct and if so, what is the best option to buy for my G5 model?
    Thanks very much
    Adam

    BD, I declare an interest!
    Look here if you would:  https://discussions.apple.com/thread/4229088?tstart=60
    I like the look of the one in your third link, but the only similar one I can find in the UK is this:
    http://www.amazon.co.uk/Daffodil-LAN02-Wireless-Internet-Adapter/dp/B003FBVUH8/r ef=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=2QR3S4NSXNBE1&coliid=I2JD2YDHCMB4HH
    but it comes with a 3 inch CD which is utterly useless to me!
    If you can confirm that the MXP2802GU2 will work for me I will buy that!
    TIA

  • What is the best option for tethering my IPhone 4s with my iPad? (the iPad is wifi only)

    What is the best option for tethering my IPhone 4s with my iPad? (the iPad is wifi only)

    #1. Understand that if you switch carriers, you can NOT take your existing iPhone with you. It won't work. You will need to purchase a new one.
    #2. Your only choices are Sprint and Verizon. Decide who has the better coverage in your area. Keep in mind that you will NOT be able to get simultaneous voice and 3G data on either of these, as their CDMA networks do not support it. The U.S. T-Mobile network is not supported and is not fully compatible with the iPhone as it operates on a rarely used frequency compared to the rest of the world.
    #3. What in the world are "niners"? Do you mean you want to be able to keep your existing "phone numbers"? If so, that should be no problem. Most numbers in the US are now portable.
    #4. Consider WHY you want to switch. If the issue is really price, you're not going to see much of a difference. A few dollars a month at best for comparable voice and data plans.

  • What is the -k option for of the Ping utility in OS X?

      Hi,
    May I know what is the -k option for of the Ping utility in OS X? It doesn't seem to be a ICMP protocol standards-relates.
    Below is the description of this option copied from Yosemite.
    -k trafficlass
                 Specifies the traffic class to use for sending ICMP packets.  The
                 supported traffic classes are BK_SYS, BK, BE, RD, OAM, AV, RV,
                 VI, VO and CTL.  By default ping uses the control traffic class
                 (CTL).
    Thank you!

    These are low-level bits defined in the kernel's IPv6 support code.
    Here is the first reference I could find that actually says what some of them are: https://github.com/darwin-on-arm/xnu/blob/master/bsd/sys/kpi_mbuf.h
    Search for "MBUF_TC_BE"

  • What are the differences between Turn in Final Timesheet and the other option: Send Progress for Selected Tasks?

    Hello,
    The resource filled his/her timesheet in PWA. 
    Now : 
    What are the differences between Turn in Final Timesheet
    and the other option: Send Progress for Selected Tasks?
    Thanks

    You are partially correct and partially wrong.
    Turn
    in Final Timesheet sends
    the timesheet to the Timesheet Manager for Approval
    but task update always goes to Status manger of the task. Taks manager you can see in MPP(insert status manager field then check)
    Yes
    after approval progress will be available in MPP as well as in Projectweb app as % complete . 
    Send
    Progress for Selected Tasks 
    Send progress of selected task to status manager after approval update will be available in both MPP and Projectweb
    app as % complete.
    In Send
    Progress for Selected Tasks Timesheet
    Manager doesn't receive anything in his Approval center
    because all the update directly go to Status manager Approval center.
    Here you have to understand
    that there are two role Timesheet Manager(for timesheet approval) and Status manager(for task
    actual approval) 
    kirtesh

  • What is the best option today for an external DVD Drive self powered

    I am planning to remove the internal DVD-ROM and use the MCE OptiBay to install a second SSD in RAID 0 configuration, what is the best option today for an external DV-ROM, ideally self powered via USB or Firewire ?, thanks

    can't say I agree with the RAID 0, if that messes up or one drive dies, you lose it all. Not to mention, The SSDs made like that aren't made for RAIDs...
    The ones that can are really expensive, high end stuff.
    http://addonics.com/products/externalcd/pocketusib.asp
    http://addonics.com/products/externalcd/pocketii.asp

  • What are the best options for running windows on a Mac Pro

    what are the best options for running windows on a Mac Pro

    For gaming and other CPU intensive stuff: Boot Camp – https://www.apple.com/support/bootcamp/
    For the rest: any virtualization software (Parallels/Vmware Fusion/VirtualBox)

  • What is the subscribe option for?

    What is the subscribe option for? Can I utilize this to specialize photo galleries to specific clients? Give them a password and have them login to view their photo proofs?
    This is so beyond my brain....I know what I want to do...but I cannot figure it out to do it. Any guidance or help would be greatly appreciated.

    Clicking the subscribe button adds the photos on your page to iPhoto on your visitors computer.
    Anytime you add or delete photos the album in iPhote gets updated.
    Your visitors can save your photos permanently when they unsubscribe.
    Try it : http://holiday.dailynews.webege.com/Fotos.html
    Click Abonneer
    Practice.

  • What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

    Hi,
    I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
    I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
    Dr. Kirco Arsov
    Solved!
    Go to Solution.

    Hi Kirco,
    I have some more information for you :-)
    I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
    As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
    From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
    TB_0_LevelEdgeReg :: Offset 0x660
    TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
    7..6: EdgeMode
    5..0: LESel
    LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
    EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
    TG_0_CombinationReg :: Offset 0x6A0
    TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
    19..16: CombFunction
    5..4: CombTypeB
    1..0: CombTypeA
    CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
    CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
    CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
    All of the other bits should be set to 0b0.
    Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
    Joe Friedchicken
    NI VirtualBench Application Software
    Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
    Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
    Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
    Senior Software Engineer :: Multifunction Instruments Applications Group
    Software Engineer :: Measurements RLP Group (until Mar 2014)
    Applications Engineer :: High Speed Product Group (until Sep 2008)

  • I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

    I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

    Same here, I have Logic Studio 8 and wouldn't mind staying with that version, except that the installer won't run on my new Macbook Pro as PowerPC apps are no longer supported. That's the message I get in any case.
    I use to run Logic on a 2006 Macbook Pro.
    I guess that makes me a very unhappy Apple user! I've been using Logic from the Emagic days, bought every upgrade only to see Apple kill what used to be one of the best Pro Audio application. Imagine if they had done the same to Photoshop, there would be a lot of unhappy designers out there
    Paying the full price for years to slowly see your daily app go down in price & efficiency until it's given away at $199 for semi pro users. Well, at least ProTools is stil alive & kicking so I guess that's the way forward now.
    This is coming from someone that never ever used a Windows machine to make music! Life is good still!

  • HT1277 How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info Messages on server.

    How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info > Messages on server. What am I doing wrong?

    Mail > Preferences… > Accounts > Advanced > Remove copy from server after retrieving a message

  • What are the defaul username and password for SQL Plus ?

    hello, what are the defaul username and password for SQL Plus ? i'm using the client 11.2.0.1

    You'll need to download the full database installation files for the platform you are using. They are two .zip files, about 2.2 gig total.
    I'm not going to give you the link because you should be able to find it easily. You have to read and accept the license agreement anyway.
    When you install it, you'll be given several options about the type of database you want.
    But before you install anything, you should read the installation manual for your platform.

  • What is the Infinity option 2 usege limit?

    hello all.
    what is the Infinity option 2 usage limit? is it 100gb or 300gb? a month.
    cos its been 5 days now I'm getting very bad speed, 2 mb down and  .8mb up after 6 pm till 2am. this is absolutely rubbish paying £24.99 a month for this **bleep**!! and i cant even watch anything  online!!
    regards
    Ben
    Solved!
    Go to Solution.

    zodfsx wrote:
    hello all.
    what is the Infinity option 2 usage limit? is it 100gb or 300gb? a month.
    cos its been 5 days now I'm getting very bad speed, 2 mb down and  .8mb up after 6 pm till 2am. this is absolutely rubbish paying £24.99 a month for this **bleep**!! and i cant even watch anything  online!!
    regards
    Ben
    Hi Ben.
    The threshold figure is 300GB per month.
    Click https://www.bt.com/appsyouraccount/secure/cyahub.do and enter your bt.com associated login ID and password (if it doesn't already let you in). The ID needs to be associated with your BB phone number.
    Go down to Manage your services, click the Broadband tab, and then choose View your broadband usage.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • What's the best flash to use for nighttime sports games?

    What's the best flash to use for nighttime sporting events? I have a rebel XT and I'm pushing it to its limits trying to stop the action. I've tried a speedlite 430 but it didn't have a hook up for an external battery pack and I was told I'd need the extra power. Just tried the 580ex ll on Friday but at the 1/1 setting, it didn't flash for each frame in a burst, even with the external power. I should have backed it down to 1/4 but didn't know at the time. Any thought on a really good flash for night sports? Is the 580 a good choice?

    JUst as Tim_S said. YOu will want a external battery pack. Unforatannly the 430 does not have the option to plug in a external battery pack so will want to pick up a 580 or one of the new 600 series. 
    Then you start looking at the battery packs. I recommend Quantum power packs
    http://qtm.com/index.php/products/2012-05-17-18-18-59/turbos
    5D III, 8-15L, TSE 24L, 24-105L, 85L, 70-200L, EX600 X2

  • What is the procedure/code in VBA for passing the calc scripts dynamically based on the selection.

    Hello Gurus,
    I want to know what is the procedure/code in VBA for passing the calc scripts dynamically based on the selection.
    For example:
    X=EssVCalculate("Sheetname","Calc_Script name",True)
    In the above code instead of the *"Calc_Script name"* I want a script which is called dynamically and the values are calculated accordingly.
    Thanks in advance
    Saurabh

    Hi Todd,
    This is the situation:
    I have a calc script in Essbase which I can call to perform the calculations on the current sheet that is retrieved. I want calculation for the following formulas:
    x = EssVCalculate("Sheet2", "CalcBC", False)
    CalcBC is my calc script which is present in Essbase
    So instead of passing the above script I want to pass the conditions dynamically in the VBA code . I don't want to mention the script name directly in EssVCalculate option
    For example:
    I have three drop down menus from which I would select three different( zero level )members. It would then retrieve the data for that particular values in the excel sheet and now when I click on Calculate button it should calculate the script dynamically.
    I don't know how calc scripts can be executed dynamically in the VBA code itself.
    Thanks in Advance
    Saurabh

Maybe you are looking for