What is the required file for update?

I've recently (and unfortunately) installed the new iPod update 1.2. When I try to update the songs on my iPod, I get a message that tells me the iPod can't be updated because the required file is locked. Any idea what file that may be and how I can unlock it?
Dell Dimension 8400 Windows XP 30G Video iPod

This link should help:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

Similar Messages

What are the required settings for Quality Certificate

Hi Team
What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording for inspection lot.
Please sugget me T-Code to view this.
Can I see say for 6-9 months RR done insp. lot.
Thanks

Settings for Quality Certificate for Raw material from vendor,
Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
There are 2 cases,
u want details of certificate send by vendor
u want to record results and see inspection lot wise results.
case1
depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
all these certificates can be dispalyed in QC55 T_CODE.
CASE2
U can record results and see in inspection report tab in QA33
Edited by: YOGINI B THORAT on Aug 4, 2009

Update my app. What is the correct procedure for updating an app/folio?

I designed a folio in Indesign CS6 and created an app of the folio in adobe dps and succesfully uploaded it to the app store. Now I want to update my app. What is the correct procedure for updating an app/folio?

no, just update your content and recreate the Single Edition App. Your certificate should still be valid so there is not need to recreate these.
... your App ID absolutely need to be the exact same one you used for the first version if you want to make sure this is an update.

What are the images URI for Update , Add Applicant and unlock

what are the images URI for Update , Add Applicant and unlock
where can I find all images URI in OAF

For update - updateicon_enabled.gif
You can find all other in $OA_MEDIA derectory.
-Anand

When syncing with itunes, says that it can't find the required file for syncing with iphoto

when i sync my iphone to itunes, when it comes to the part of syncing the photos from iphoto
it says that it cant find the required file. so when i tick off the sync with iphoto and i sync again with itunes, it doesn't give this problem
so it has to do with the sync with iphoto
can somebody help me plz?

Delete the iPod photo cache, as described here:
http://support.apple.com/kb/ts1314

What is the .plist file for view options?

Can't pick a background color after Lion instsll. Thought this might correrct it? Yes?

hi uttam
the sar file for defalut framework is
SCSCLIENTEP_5-20000497.SAR & MMC_0-20000497.SAR
this file u will get from service.sap --> software download
search for SAP STARTUP FRAMEWORK 6.20
and the related note for it is
not number 687485
regards
Janak Mehta

What is the best tool for updating an existing Domain?

What I want to do is create an installation program that updates an existing domain
with a new server and a new application targeted to that server. The installation
program has to work with any valid domain and needs to be easy for the end-user.
Using a script to extend an existing domain using the configuration wizard insilent mode seems like a real good approach. The problem is that a Server is NOT
a configuration object type available when extending an existing domain. So I
can’t add a new server to an existing domain with this approach.
Using ANT tasks – wlconfig and wlserver would probably do the trick. The issuehere is that the domain admin server must be running, and my preference is that
this not be the case. Using JMX has the same issue.
So what I’m I left with in terms of tools? Anything? Or do I have to manipulatethe config.xml file directly? Is this a good idea?
Has anyone else faced a similar scenario, and what solution did you come up with?
Thank You

ANT and wlconfig is a way.
config.sh has an off-line tool for updates.
whshell is an alternative to ANT.
We are working on a solution to unify all of this in Diablo.
cheers
mbg
"Greg" <[email protected]> wrote in message
news:3fa294c7$[email protected]..
>
What I want to do is create an installation program that updates anexisting domain
with a new server and a new application targeted to that server. Theinstallation
program has to work with any valid domain and needs to be easy for theend-user.
>
Using a script to extend an existing domain using the configurationwizard in
silent mode seems like a real good approach. The problem is that a Serveris NOT
a configuration object type available when extending an existing domain.So I
can't add a new server to an existing domain with this approach.
Using ANT tasks - wlconfig and wlserver would probably do the trick. The
issue
here is that the domain admin server must be running, and my preference isthat
this not be the case. Using JMX has the same issue.
So what I'm I left with in terms of tools? Anything? Or do I have to
manipulate
the config.xml file directly? Is this a good idea?
Has anyone else faced a similar scenario, and what solution did you comeup with?
>
Thank You

What is the best method for updating Bios for 8.1 on GT70 2OD

Hey,
I've been getting a bunch of different BSODs and its been recommended I update my bios because I am running win 8.1
Im just a little confused with which method would be best to update the bios. The EFI bios utility method on the PDF looks easy enough, but the information above that says to use the flash utility in the compressed file. Is that the afuwinx64.exe file and I run it from windows? or can I do something with the .bat files?
As you can tell I dont know to much about this kind of thing, I have been avoiding this update hoping to solve all issues without it, no such luck unfortunately. The feedback I got said that it seems as If something is misconfigured. in your opinion is it likely not having the bios updated could cause issues?
Thanks.

Use one of the methods outlined in the PDF files on the website from MSI. Either of those methods should work just fine.
The generally recommended method though is using the BIOS HQ Flasher.
>>Use the MSI HQ Forum USB flasher<<
I would NOT just flash using the exe or the bat files, as this can cause issues if done improperly.
I believe there was a bios update for the GE series of laptops because of a configuration issue for Windows 8.1. I don't believe the update for the GT series for Windows 8.1 had that same issue.

What is the maximum charge for updating software?

Dear friends,
I am from India. I see nokia devices most lossing softwares. I want to update. What maximum charge can service centere take?
Thank you,,,,,
Solved!
Go to Solution.

You don't have to go to Nokia Care for updating ..You can do it yourself .. Refer THIS
You may also use the Nokia Software Recovery Tool in case of evantualities ..
If you need to visit a NCC, during Warranty, there may not be any charges .. but it will depend upon the Care centre once the Warranty is over ..

What is the best option for 'update.... set' in owb?

Hello.
I have been reading on a number of ways to implement following query in OWB:
update TABLE A
set Value F = (select Value B
from table B
where (nvl(trim(A.valueC),trim(A.valueD) = trim(B.ValueF)
and substr(A.valueG,1,2) = trim(B.valueH))
or ( nvl(trim(A.valueC),trim(A.valueD)) is null
and trim(B.valueF) is null
and substr(A.valueG,1,2) = trim(B.ValueH)
The table A and table B do not have a relationship.
Key lookup - some of you recommend not to use it as it is not very good.
Set Operator or Joiner? What would be better?
I created a function for this query, but i cannot use it in the map because i get this error:
API8003:coonection target attribute group is already conncted to an incompatable data source. Use a Joiner or Set operator to join the upstream data first before conncting it into this operator.
What would be the best way to do it? how i can pass the parameters from two different tables into my function? What feature of OWB would be the best option i cannot use for this?
Or my best bit to re-create it as a procedure and run it that way?
Thank you very much for your help
Kind Regards
Vix

Hopefully this is helpful and it makes sense written out.
First, I'm not sure if there are some parenthesis missing in your update statement because I can't tell for sure whether the statements separated by the 'or' should be considered separately [ as in "(a = b and a=c) or (c = d)" vs "a = b and a = c or c = d" ] or if the logic is exactly as written. My suggestion is based on the idea that the query is exactly as written -- if parenthesis were missing, insert them as appropriate.
My suggestion is to use a join. Even though you say A and B don't have a relationship, they sort of do based on the update statement.
I would suggest that you start with source A and insert an expression operator. You'll send in ValueC, ValueD, ValueG. You create three outputs:
BValueF = nvl(trim(A.valueC),trim(A.valueD))
BValueH = substr(A.valueG,1,2)
NullValue = nvl(trim(A.valueC),trim(A.valueD))
Then add source table B and insert another expression operator. You'll send in ValueF and ValueH. You create two outputs:
TValueF = trim(B.valueF)
TValueH = trim(B.valueH)
Then insert a join operator. For ingrp1, you'll drag over whatever can uniquely identify A and the three outputs from the expression. For ingrp2, drag over ValueB and the two outputs from the expression.
Then your join condition will be
BValueF = TValueF
and BValueH = TValueH
or NullValue is null
and TValueF is null
and BValueH = TValueH
Then add your target table A, set it to update on the unique key. Drag the unique key from the joiner to the unique key on A, and drag ValueB to A's ValueF.
Hopefully this makes sense written out. I didn't test this, but it looks logically correct on paper.
Good luck,
Heather

What are the requirement need for installing of PI7.1

Hello All,
What are the Hardware and Software requirements required for Installing PI 7.1. Installation of PI 7.1. need 64 bit operating system or can I install 32 bit operating system.
Can anybody send me the installation document on PI 7.1.
Thanks & Regards,
Venkat K

Hi,
yes only 64 bit is supported read page no 15 of below link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
Installation guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00004f25-6190-2b10-2c8b-fa419234c28b
Re: SAP PI 7.1 minimal hardware
chirag

What is the best file for editing?

I have movie clips that I need to burn onto a DVD-R. This DVD will be given to a friend and he will edit the contents in his own editing program (Pinnacle software). He asked for the highest resolution possible.
Of the following, which is the best file to create for him so that he can edit it?
- DV
- AVI
- MPEG-1
- MPEG-2
- MPEG-4
Thank you!!

if your source is from a camcorder, the native codec DV is 'best'.
iMHD imports those streams from tape 1by1, it is a 'clone', a bit-identical 'copy' from the tape.. couldn't be an better...
avi - is no codec nor 'format', just an old Windows media container. can contain literally all kind of codecs..
mpeg1 - historic (=old) codec, Standard don't allow a higher res than 320x240 .. antiqué, therefor veery compatible.. not meant for editing, a delivery codec, e.g. on VCDs...
mpeg2 - comes in many flavors, as on videoDVDs (.vob), .mod (JVC camcorders), .ts (transport streams from digital receivers), and in many 'versions', as h263, h264.. again: delivery codec by concept.
mpeg4 - 'inbetween' version of mpeg1 and mpeg2, comes again in many flavors.. delivery codec by concept.

.ear file is not including all the required files for deployment

While deploying from JDeveloper, some of the files (eg. <Project>.cpx file, .class file) are not included in the .ear file.
Pls help.

Is the .ear file deployed with the Deploy to EAR file selection?

What is the best option for updating BW Dev when it's out of sync with Prod

I'm looking at getting our BW 3.X systems synchronised. Currently the Dev system is developmentally behind the Production system. One suggestion has been to transport the differences from Production back into Development - I'm concerned with how we ensure that everything is picked up. Another option is a system copy, however we have issues with Oracle specifically SIDS in the Tablespace names.
Any suggestions would be appreciated.
Regards,
Vanessa

hi
Ask basis peerson for the suggession, basis guy only can do the system copy or client copy etc as per your requirement.
Regards,
Chandra.

What are the required permissions for Portal?

Assuming it's not top secret info, can anyone provide a link to, or list the permission requirements of OID with regard to running Portal? We are having serious headaches with permissions and would like some reference to the exact requirements.
Thanks!
-Sean

known_hosts should belong to your and your group
and the read write permission by default are 644

What is the required file for update?

Similar Messages

Maybe you are looking for