What is the requirments to install Solaris OS

hai Everybody,
i have a computer of 256ram, 2.74ghz,80gb..i have another os inside.. (windows xp)..
how can i install SOLARIS OS and what is the procedure to install... from where i get the OS software...
Can Anyone Help me Out..
Thanks and Regards,
KarthikeyaN

thanks
and can you tell me the steps to install Solaris OS.. i found it in the website but it is confusing.. also there are two types of solaris which should i download for personal use.. kindly tell this
thank you
Regards,
karthikeyan

Similar Messages

  • What are the prerequisites to install and configure Oracle Coherence 3.4

    What are the prerequisites to install and configure an Oracle Coherence (3.4 Grid version) on RHEL5.0 system?
    I want to make an Oracle Coherence Gid Data system for testing purpose using 3 machines.
    What kind of network configuration is OK?
    What software should be installed in advance？
    Thank you

    Hi,
    I would read through the Testing and Tuning section of the following page.
    http://coherence.oracle.com/display/COH34UG/Usage+(Full)
    Even though you are not about to go into production I think the Production Checklist has some very useful information.
    http://coherence.oracle.com/display/COH34UG/Production+Checklist
    -Dave

  • What is the cpu architeture of solaris version of BPEL bundle, x86 or SPARC

    Hello,
    I'd like to know what is the cpu architeture of solaris version of BPEL bundle, x86 or SPARC located here: http://download.oracle.com/otn/solaris/ias/1012/as_sun_bpel_101200.cpio
    The file is more than 400Mb in size, so I need to know before downloading.
    Thanks.

    hi,
    are there any plans to release it for x86 (32 bit) platform. I'm also interested in testing beta versions of oracle software (specifically bpel, jdeveloper) on solaris 10 x86 platform, is there any beta CD available for these purposes?
    thanks.

  • How to check SAP Component version and what is the latest patch installed

    Hi Experts,
    Can you please tell me that how to check SAP Component version and what is the latest patch installed.
    Thanks

    there are 2 easy ways
    1) log on to SAp System, on menu bar, slect system > Status...
    2) log on to system URL and click on system Status...
    Thanks,
    Prasant K Paichha

  • What are the prerequsite for installing and Configure  Knowledge management

    Hi All,
    what are the prerequsite for installing and Configure  Knowledge management in CE 7.1 eph1.
    Thanks
    AB

    Hi Michael,
    Thanks for yor quick response.......Can you please tell me whats the alternative for KMC in CE 7.1 in portal
    thanks
    AB

  • HT3986 what is the risk to install windows 7 on mac book pro?

    what is the risk to install windows 7 on mac book pro?

    If you have back ups and follow apples instructions on using bootcamp assistant to install Win7, there is no risk.
    If you choose not to follow the instructions apple provides and have no back ups well then there is high risk of dissapointment.
    Just follow the instructions and you should be fine.
    Good luck.
    Edit:  Here's a link to the install instructions. Just choose the one for "Lion OSX". Should be the first one on the list.
    http://support.apple.com/manuals/%23macos
    Message was edited by: Probie1983

  • What are the chances on installing Windows 8 pro on mac?

    Hi guys, i just wanna know if what are the chances on installing a windows 8 pro on mac?
    I just bought a CD of windows 8 pro. Im planning to use it on my mac because i am currently studying a software which is applicable on windows such as Visual Studio 2008, 2010 or 2012.
    I am planning to use bootcamp for windows 8 pro, i dont like to use parallels or vm.
    and i heard about bootcamp doesnt support windows 8, is that true?
    If it is true, so does it means it is not possible to use windows 8 using bootcamp?
    Am i right that bootcamp offers the drivers or something?
    Or can i just update the drivers for windows manually, u know the thing which u can found it on control panel on windows.

    Grazzii wrote:
    Running Windows 8 on my iMac right now buddy. You don't actually need Bootcamp to do all the heavy work for you - it's just a parition tool. However, you will need Bootcamp tools once Windows is installed to get the most out of windows. Without the Bootcamp tools installed, Windows will run - your mouse and keyboard should also work, but the resolution, graphics, speed.etc will all be a little over the place. I used Bootcamp tools 3.0 as it came with my iMac, not sure if the latest 4.0 works...
    Boot Camp 5.1 is the latest version, but no version includes drivers for Windows 8.

  • How to tell what was the latest patch installed on VMware ESX Server 3i, 3.5.0, 207095

    Hello Guys,
    I have been running an old server that was installed as a test system on a DELL workstation - Optiplex GX620 (32 bit).
    During the installation I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:
    "return interface.GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE" to read:
    "return interface.GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI" this made it worked and I have been using it for 3 years now. However, at this time I was hoping to update it with the latest patches and updates and I cannot figure out if I have ESXi or just ESX, nor what was my last update and what is required next.
    I have used this command to get the following output:
    # vmware -v
    VMware ESX Server 3i 3.5.0 build-207095
    ... I believe the 3i indicates that I have an ESXi 3.5.0 but is build-207095 the same buid as ESXi 3.5.0 Update 5?
    If not, how do I go about updating it? What is the KB # I should download?
    I can manage it using vSphere Client 5.5 and I can SSH into it using Putty.
    Note: When I run... "# esxupdate --bundle=ESXe350-201302401-I-SG.zip update" from within the folder where its at in the datastore, nothing happens... just a new line is scrolled.
    Also...
    # esxupdate query
    <?xml version="1.0"?>
    <query-response>
      <installed-packages>
        <package ID="ESX-207095">
          <name>firmware</name>
          <version>3.5.0</version>
          <rel>207095</rel>
        </package>
        <package ID="ESX-CLIENT-204907">
          <name>viclient</name>
          <version>2.5.0</version>
          <rel>204907</rel>
        </package>
        <package ID="ESX-TOOLS-207095">
          <name>tools</name>
          <version>3.5.0</version>
          <rel>207095</rel>
        </package>
      </installed-packages>
    </query-response>
    /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/Patches/ESXe350-201302401-O-SG #
    ... is there any further update for this system? I believe so as the Heartbleed patch etc. was not around when I was installing this server back in 2010.

    Hello Richardson Porto,
    I wanted to tell you that I appreciate the help so far.
    Also wanted to point out to you, that the KB indicated above is older than Update 5, which from your instructions is what I have installed. That KB is for U2.
    Now, the document definitely has step by step instructions on installing, querying etc. But my problem is ... NOT ALL COMMANDS WORK FOR ME!
    This is why I am here because all the instructions I have been reading does not work with my flavor of ESX 3.5.0, 207095... WHY? It has me stumped.
    For example, here are some commands the doc asked me to do and they failed: (Note that I had to unzip the folder on my windows box and upload it to /tmp using vSphere Client)
    /tmp # ls
    ESX350-201302402-BG      ESX350-201302402-BG.zip  vmhsdaemon-0
    /tmp # unzip ESX350-201302402-BG.zip
    -ash: unzip: not found                                                                                          -----------------------THIS COMMAND WAS NOT FOUND ?
    /tmp # cd ESX350-201302402-BG
    /tmp/ESX350-201302402-BG # esxupdate info
    Invalid command info                                                                                          -----------------------THIS COMMAND WAS INVALID ?
    /tmp/ESX350-201302402-BG # esxupdate update                                       -----------------------NOTHING HAPPENED HERE ?
    /tmp/ESX350-201302402-BG # ls -lh
    -rw-------    1 root     root       321.3k Dec 13 15:24 VMware-esx-scripts-3.5.0-988599.i386.rpm
    -rw-------    1 root     root         1.6k Dec 13 15:24 contents.xml
    -rw-------    1 root     root          701 Dec 13 15:24 contents.xml.sig
    -rw-------    1 root     root         1.4k Dec 13 15:24 descriptor.xml
    drwxr-xr-x    1 root     root          512 Dec 13 15:24 headers
    /tmp/ESX350-201302402-BG #
    NOTE: All these commands were run sequentially and I just copied and paste it from my SSH Client (PuTTy.exe)
    Is there a toolkit I need to install to have these commands or what really am I missing here? Host is in Maintenance Mode and the 1 VM that's on it is off!
    I am going to start a new discussion with this NEW ISSUE, since the Heading of this DISCUSSION has already been SOLVED! Thanks again!

  • What is the problem in installing 8.1.7 on Linux

    Hi
    I have seen a lot of posts discussing about
    problem in installing 8.1.7 on rh Linux 7.
    Can anyone tell me what is the actual problem, and do I need to download any patches to resolve it ?
    pam

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by pam:
    Hi
    I have seen a lot of posts discussing about
    problem in installing 8.1.7 on rh Linux 7.
    Can anyone tell me what is the actual problem, and do I need to download any patches to resolve it ?
    pam<HR></BLOCKQUOTE>
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>I hava a problem in ORACLE_SID variable during installation<HR></BLOCKQUOTE>
    null

  • WHAT IS THE PROCESS TO INSTALL HFM SOFTWARE IN MY SYSTEM,CAN ANYONE EXPLAIN

    Hiiiiii Everyone,
    I want to install HFM,FDQM,FR software into my system,Can anyone explain me clearly i.e...I wanr hfm 11.1.1.3

    There are a lot of other variables here that the OP will need to think though such as :
    #1 - What OS environment is he installing to?
    #2 - 32 bit / 64 bit?
    Some examples :
    - If running Windows 2008 64 bit OS, there are some things you need to do specific to that.
    - If you are running 64 bit Hyperion software / 32 bit FDM and NOT on IIS 7, you have other considerations. On IIS 7 you have additional considerations as well.
    - If running more than 2GB of memory for the app, you will have registry settings to make on HFM app server to make sure you are making full use of additional memory
    etc, etc, etc.
    #3 - He will also need workspace so that he can install framework, and financial reporting web application
    #4 - Will need FRclient and most likely an installation for print server.
    #5 - Clustering? If so, you need considerations for Shared Storage
    #6 - Database? Specific settings for Oracle vs MS SQL Server
    #7 - EPMA or Classic? (Even if classic apps, I'd probably install EPMA so that it is available if you want to migrate)
    #8 - Calc Manager or No? (Probably install regardless so it is avaialble)
    I would strongly recommend starting here :
    http://docs.oracle.com/cd/E12825_01/index.htm
    I would review the Introduction, Readme, and Deployment tabs (especially deployment) to help you plan how you are going to do this install.
    Chances are you are going to need the 11.1.1.4 version of the following files to build your installer, etc.
    Oracle Hyperion Enterprise Performance Management System Installer, Fusion edition Release 11.1.x.x for <platform name>
    Oracle Hyperion Foundation Services Release 11.1.1.x.x for PlatformName Part 1 of 7
    Oracle Hyperion Foundation Services Release 11.1.1.x.x for PlatformName Part 2 of 7
    Oracle Hyperion Foundation Services Release 11.1.1.x.x for PlatformName Part 3 of 7
    Oracle Hyperion Foundation Services Release 11.1.1.x.x Part 4 of 7
    Oracle Hyperion Foundation Services Release 11.1.1.x.x Part 5 of 7
    Oracle Hyperion Foundation Services Release 11.1.1.x.x Part 6 of 7
    Oracle Hyperion Foundation Services Release 11.1.1.x.x Part 7 of 7
    Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.1.x.x
    Oracle Hyperion Enterprise Performance Management Reporting and Analysis Core Compentents Release 11.1.1.x.x
    Oracle Hyperion Financial Reporting, Fusion Edition Release 11.1.1.x.x
    Oracle Hyperion FinanciaManagement, Fusion Edition Release 11.1.1.x.x
    Oracle Hyperion FinanciaData Quality Management, Fusion Edition Release 11.1.1.x.x
    FinancialReportingStudio-111xx.zip <---- Stand alone installer and not installed with Install Tool.
    Also, the following Non Hyperion programs will most likely be needed at one point or another :
    - 7zip (all servers)
    - Office (Depending on the version you choose, you will have some considerations to account for)
    - Ghostscript (***MUST BE 32-BIT***)
    Edited by: beyerch2 on May 11, 2012 8:56 AM

  • With 6 what are the steps to install Oracle 11gR2?

    In public-yum at least there doesn't appear to be any oracle-validated to get the dependencies loaded before trying to install Oracle.
    So what is the process with R6U0?

    As Avi suggested, following the Oracle installation for OEL 5 is pretty fine - eventhough 11gR2 on OEL6 is not yet cetified.
    I just received an exception on the missing package pdksh-5.2.14-30.6.x86_64.rpm. It was not required on OEL5, I'm not a Linux specialist but I have had to take it from OEL4.7, then everything is working fine.
    --> From OEL 6.0
    rpm -Uvh kernel-headers-2.6.32-71.el6.x86_64.rpm
    rpm -Uvh glibc-headers-2.12-1.7.el6.x86_64.rpm
    rpm -Uvh glibc-devel-2.12-1.7.el6.x86_64.rpm
    rpm -Uvh compat-gcc-34-3.4.6-19.el6.x86_64.rpm
    rpm -Uvh libaio-devel-0.3.107-10.el6.x86_64.rpm
    rpm -Uvh compat-libstdc++-33-3.2.3-69.el6.x86_64.rpm
    rpm -Uvh elfutils-libelf-devel-0.148-1.el6.x86_64.rpm
    rpm -Uvh ppl-0.10.2-11.el6.x86_64.rpm
    rpm -Uvh cloog-ppl-0.15.7-1.2.el6.x86_64.rpm
    rpm -Uvh mpfr-2.4.1-6.el6.x86_64.rpm
    rpm -Uvh cpp-4.4.4-13.el6.x86_64.rpm
    rpm -Uvh gcc-4.4.4-13.el6.x86_64.rpm
    rpm -Uvh libstdc++-devel-4.4.4-13.el6.x86_64.rpm
    rpm -Uvh gcc-c++-4.4.4-13.el6.x86_64.rpm
    --> From OEL4.7 (Disk1)
    rpm -Uvh pdksh-5.2.14-30.6.x86_64.rpmNicolas.

  • What's the requirments to connect SQL server ?

    Hi everybody
    We are the bignners need help here we need the details about how to setup every single point to start programming with J2EE
    1- What I should install on my computer ?
    for examples I have NetBeans IDE I want connect it with SQL server or MS access so what's the software I need and
    - what's the JDBC ?
    alot of question any way we need your help this answer will help all beginners now and in the futuer.
    thanks
    Message was edited by:
    programmer.alyaseen

    what is the requirement to connecty sql server with Netbeans IDE 5.5
    and what is the procedure

  • WHAT IS THE APP TO INSTALL THAT WILL CONNECT ME TO CREATIVE CLOUD WITHOUT CONNECTING TO INTERNET?

    WHAT IS THE APP THAT CONNECT ME TO CREATIVE CLOUD WITHOUT CONNECTING TO INTERNET?

    I don't think that is possible... but, after you do your initial install, you are only supposed to have to connect to the Internet once a month to verify your subscription
    Chat Now button near the bottom for Activation and Deactivation may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    and
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq

  • What is the best pre-installed external hard drive for my macbook pro?

    I need advise on what kind of pre-enstalled external hard drive which supports both usb and firewire to get for my new macbook pro?  I would like to stay in the $100. range but am willing to go higher .

    giftshopgurl wrote:
    pre-enstalled external hard drive
    Pre-installed with what?
    Your best bet is to always format a new hard drive,  so there are no surprises.
    If you buy an external HD specifying  ready for Mac ( or some such) it will cost you more for nothing.

  • What is the order for install of the 16cd's for version 7.1?

    There are about 16 cd's required for the complete install of my corporate 7.1 version.
    Does anyone know which cd's need to be installed and what sequence of install is needed?

    Start with the LabVIEW development CD. It will prompt you for the others as required.
    After that, just browse through the other CD's for things you may want.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for