What is the right Balance of CUDA Cores with VRAM for After Effects?

If you have to make a choice between 3GB of VRAM & 2880 CUDA Cores OR 6GB of VRAM and 2304 CUDA Cores which Display Card would you choose for 3D work in After Effects?. Would the answer to this question be different for Premiere Pro?

Completely irrelevant for AE, since there is no hardware acceleration in AE. For PR, look at Tweakers Page

Similar Messages

What is the right way to do a sysprep Image for Windows 7 and 8

Hi,
i´d like to know which way is the right one to do a sysprepp from an System with Windows 7/8.
Is it ok when I install the system with all drivers/patches etc. and after that I will open a command prompt with admin rights and choose the settings OOBE and Genrealize and Shutdown.
After that I create an Image with ImageX or Acronis and I´m ready to deplay it right? The local user which I created during the installaton should stay as an Supportuser.
So is ok or is there something wrong. Microsoft itself shows this way here:
http://technet.microsoft.com/en-us/windows/ee530017.aspx
But they write a lot of other faq´s where they discribe other ways. So what is now right and wrong?
Please don´t le my die stupid ;)
Regards,
The Core

Hi,
Any update here? Have you checked the links above?
Regarding your concern, it is OK to install the drivers or patches before you Genrealize the image. And if we want to keep the drivers during sysprep in order to use it on the computers with the same hardware configuration, we should specify
PersistAllDeviceInstalls to true.
Important: When you set up your reference computer, Windows Setup installs drivers for any detected devices. By default, Windows Setup removes these drivers when you generalize the system. If you're deploying the image to computers that
have the same hardware and devices, you'll want Windows Setup to reinstall these same drivers. To keep these drivers on the computer during system generalization, set the Microsoft-Windows-PnPSysprep |
PersistAllDeviceInstalls setting to true.
The video shows the general steps using sysprep and imagex to capture the image. If you have no special requirements for drivers, or some applications need to be specific, just follow the steps. OOBE is a simple booting process, and audit mode is a process
to specific the image. More information, see:
Customize Windows in Audit Mode
Any other concerns?
Best regards
Michael Shao
TechNet Community Support

What is the right sdk api to work with webi reports in BOXI Release 4?

Hello,
I just read in the omg model for rebean (sdk for working with webi report documents) that all functions to access the report structur and layout are no longer availabe beginning with Release 4.
Can anyone confirm, that this is the case?
Are those functions moved to a different SDK component?
Thanks in advance,
Bernd
Dokumentation about rebean _omd
u2022 The object model shows many funtions , classes in red which means:
Note: The Classes, Interfaces, and Methods marked in red are no longer functional from the SAP
BusinessObjects Business Intelligence Platform 4.0 release onwards.
u2022 Among those functions are all !! We need to analyze the report layout
u2022 No longer supported: DocumentInstance.getDictionary() , DocumentInstance.getOpenDocumentInfo(), DocumentInstance.getResourceManager(), DocumentInstance.getStructure()
u2022 Classes no longer supported: ReportElement, ReportDictionary, Query, QuerySorts, DataSourceObject(s), SQLDataProvider,QueryNode, DPExpression, QueryContainer, Link,
u2022 Classes no longet supported: ReportBody, ReportContainer, ReportStructure, ReportBlock, Graph, *Table
u2022 Classes no longer supported: Cell, PageHeaderFooter

Thank you for the information srrachna !
Well, the point with the report engine sdk is a surprise. What is the sense of new functionality when you cannot use it (spoken for the api processing), and in addition when the new functionality eliminate functionality which was available before in the sdk.
In my view this cut is to hard. The .pdf speaks from deprecated, but the blog and the information in the report engine api speaks a different language. The functionality is not just deprecated but no longer available.
Hope SAP will address that before relase 4 becomes GA in May 2011.

What is the most efficient way to use Remove Grain from After Effects on large Premiere Pro project?

I've tried to use Dynamic Linking both ways but it doesn't the effects don't appear no matter how dramatic I make them. Why couldn't there just be Remove Grain in Premiere Pro so I wouldn't have to go through the headache of figuring this out. I've tried importing the Premiere Pro project into After effects where everything comes up and, since there's so many files, it doesn't seam feasibly or convenient at all. Trying Dynamic Link vice versa didn't lend results either. What can I do??? Projects range from about a half hour to an hour and a half. Thank you.

The situations are well lit; it might be lack of knowledge on the camera settings itself.
Sort that and your workflow issue dissapears instantly.
There's nothing more efficient?
Yep...read above... but ...any Plugin. eg Neat Video... will take long processing time.
Fixing grain..actually "noise"...is always an image degrading process as well. It blurs!

How does mackeeper 2012 work? and what is the benefit? is that same with kaspersky for windows? tks

How does mackeeper 2012 work and its benefit? Is that same with Kaspersky for windows?

Good, be sure not to use their uninstaller, which can cause more havoc, use the instructions in my first link.
Real shame they can advertize this junk on most every Mac site!
ClamXAV, free Virus scanner...
http://www.clamxav.com/
Free Sophos...
http://www.sophos.com/products/enterprise/endpoint/security-and-control/mac/
Little Snitch, stops/alerts outgoing stuff...
http://www.obdev.at/products/littlesnitch/index.html

What's the right way to start up with Portal's dev?

Hi to all Portals experts,
I am really struggling to start up learning Portals and more specific their development.Here is the problem - I am a bit new in the NetWeaver but not new in J2EE environment. I went trough all WebDynpro tutorials and really the documentation was written nice.Good hands-on approach with lots of examples and that is what I found with WebDynpro - everything well explained step by step.
But when I started the Portals Tutorials I was a bit disappointed.
1.First of all, there is no explanation which tools one needs to start up with Portal Dev?
I only have SAP Netweaver Development Studio SP15 installed on my PC and I dont have any access to R/3, CRM or other system. Is this enough to at least start to learn Portal Development or not?
2. I realize well that at some point I will need real system to play with but , until than what useful practice I can do on my own and how?
- Even within the WebDynpro tutorial , the very first Part : Define a system - (http://help.sap.com/saphelp_nw04/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/frameset.htm) -In the portal, navigate to System Administration - System Configuration - System Landscape
Which Portal ? I dont have System Administration on my NWDS SP15?Is is something I should install?unclear?
3. My understanding is that NWDS SP15 contains EP , within its J2EE local engine , but is this EP.6.0, is this enough to develop complete Portal Application A-Z or not - unclear ?
4. PDK. Somewhere I read that Portal Application can be developed with either WebDynpro or with PDK. Ive read about PDK but It is not clear if it is Dev Kit as its name says , should it be downloaded , installed or imported into NWDS, again? And bottom line do I need PDK as a Portal Developer, and at which point?
I only need the starting point for Portal Develop. or some guide that should set milestones 1st ,2nd .. I would prefer the hands-on approach. If some of you has already taken this path and can help me with your directions, links, at least how to get started, I will highly appreciate it! Thanks in advance!Regards, Bob

Hi Bob,
The below reply is as per my experience with Development so far:
1> It is not necessary to have access to R/3 or any other SAP/non SAP application unless you are writing an application in connection to them.
Example: An application which is reading data from R/3 and displaying the same in a table. Yes, in this scenario you would require access to R/3.
2> System Administration is a role just like Home, User Administration, etc in Portal itself.
It contains all the configuration related to System Landscape, Knowledge Menegement, etc
If in case you have not been given this role, you may ask your System Administrator to create the required system (PCD Object). You may then use this system from your Profile (Personalize Portal) link directly.
3> NWDS resides over Portal so you may create your own standalone application or application thats talking to the underlying Portal.
WebDynpro is used to create UI & likewise you may build Web applications or EJB applications.
4> PDK stands for Portal Development Kit. YUou may ask your administrator to download and assign the same to you. This would appear as a "Java Developer" named role in your portal. It contains all APIs required for Java development.
If you do nto have this, you may still use the Javadocs provided on SDN itself.
Depending what custom developmetn you do, depending upon the type the .par (portal archieve), .ear (Enterprise archieve), .war (web archieve) needs to be deployed in portal, so that users may access/view the custom created data.
Hope this helps
All the best!
Warm Regards,
Ritu

Web for Forte - what is the right product?

We are using Web Enterprise on a new application and on another existing
Forte application.
Concerning our experiences on the new application:
1) Watch what version of Forte and WE you use. Earlier that 3.M.2 and WE
E.1, we experienced a page truncation bug (that Forte admitted was their
bug).
2) Upgrades between Forte versions have been difficult as each upgrade means
an upgrade to the WE pieces. The only way we have been successful in these
upgrades is by recreating the repository, creating the new HTTP/HTML
libraries/projects, and importing (in order) our projects. This is time
consuming. It would be nice if Forte did not force the WE upgrade when the
Forte version changes.
3) As of yet, we have not been able to get a load balanced Web Access SO to
work. The help desk has suggested using a higher port number range (from
1780 up to 6000) but we haven't tried this yet.
Concerning our experiences with the existing application conversion:
1) The GUI interface of a windows application and a browser application are
basically different. There are things that are easy in a std GUI that are
much more difficult with a browser. So, if using std HTML, typically the
application will behave somewhat differently.
2) We used JavaScript within our HTML to do some basic editing within the
browser. This was much easier than doing std HTML to Forte for every type
of edit. In fact, we even used Forte to dynamically generate JavaScript in
certain circumstances.
3) We did NOT use Java at all.
4) The Forte application we are converting is old (4+ yrs) and was not
designed in the ideal way. Much of the processing logic and sql is embedded
inside windows. My point is that if the architecture of the existing
application is 'good' (good separation of pure GUI functions from business
rules from db access), then moving to WE can be fairly easy. If every Forte
window operation calls some method rather than invoking inline code, then
that is a good step. If every window operation calls some external
(non-window) method, then that is even better. That makes the replacement
of the Forte GUI with a browser based GUI much easier.
5) We tested, very briefly, the Window Converter operations of WE. It did
seem to work but we really could not utilize this facility because of the
poor design of the Forte GUI. We would have been forced to re-write our
existing GUI to take advantage of this.
6) We are attempting to reuse what we can from the existing application but
we are also taking advantage of this rewrite to implement a cleaner
architecture within a newly developed framework.
Jerry Fatcheric
Verizon Wireless
Hi Forte Experts
We are developing an application in 'pure' Forte 4GL, but have now reachedthe point >where some 20 windows must also be used from a WWW interface,
both for dataentry and >lookup of info.
So what is the right product(s) to look for / buy? Forte for Java ,WebEnterprise, >WebEnterprise Designer or is the functionality already in
30M2 and all we need to do >is to open the documentation-kit...?
Suggestions or War-stories are welcomed...
thanks
jens chr /KAD Denmark

Adobe makes three products that could work here: Photoshop Elements, Lightroom and Photoshop. Other companies also make programs that will do these tasks.
You make it sound like this is a one-time need. If that's true, I would think that the Adobe products are overkill. In fact, to edit the photos you might want to look at freeware products like RawTherapee, and there are plenty of freeware slideshow applications.

What is the right charger for a MacBook Pro 13" mid 2009 model?

What is the right charger for a MacBook Pro 13" mid 2009 model? I have two chargers for two different Mac and don't know which is thankswhich. I'm really looking for specific details such as voltage/watts and all the rest to idenify my charger. A link to where to web page where I could purchase the correct charger would also be very useful. Many thanks.
All help much appreciated. THANK YOU

Both power adapter I have are different (at the magnet end) from the one in link.
Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

What are the right names for the 2 OHS?

Hi,
Currently we have 2 options for an HTTP Web Server for APEX:
- An Oracle HTTP Server (OHS) from the database companion CD.
- An Oracle HTTP Server (OHS) from the Oracle Application Server.
The first OHS is based on Apache 1.3.x and the second on Apache 2.0.x.
What are the right way to reference them so people know what your are talking about? In the manuals they are just called OHS but since they are not the same I would like to distinguish them some way. What do you call them?
Regards Pete

OK now I think got it:
OHS from the database companion CD and from the Application Server are both based on an Apache 1.3.x HTTP server.
On the Oracle Application Server companion CD is an OHS based on an Apache 2.0.x HTTP server. This release does not contain the mod_plsql module an can therefor not be used for APEX.
Regards Pete

What's the right way to delete an entire backup ?

I've had two Macs doing wireless Time Machine backups to one Time Capsule.
Question: I got rid of one Mac, and want to delete its backup entirely (but leave the other computer's backups untouched). What's the right way to do it?

Bob Timmons wrote:
Jespes, welcome to the discussions!
Open your hard drive. Your Time Capsule icon should appear under the SHARED heading.
Click on the Time Capsule and a folder will appear to the right.
Double click the folder and you should see a xxxxxx.sparsebundle file for each computer that has been backing up.
Click on the xxxxx.sparsebundle file that you want to delete to highlight it and then click the gear shaped icon just above. Select Move to Trash. (Do not drag the file to the Trash as this will not work).
Be careful, as the file will be deleted instantly and you will not be able to retrieve it.
many thanks!

What is the right way to move a directory to another drive?

When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.

Bazsl wrote:
When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.
That's something I just did successfully one hour ago...
I suppose your are in the 'folder' view with full folder tree, not in the 'My folder' view which only shows the lower subfolder level recorded in the database.
Do you try to move a folder with its subfolders ?

What's the right way to add a swipe handler to a DataGrid?

H All:
What’s the right way to add a swipe handler to a DataGrid?
(Target = Android, AIR using Flash IDE)
Adding a handler to the DataGrid works; but (as expected) it only works on the datagrid itself. Like if you swipe on the background before rows are fully added. Adding columns over the datagrid, prevents the datagrids’ swipe handler from firing.
Trying to add a swipe hander to the columns themselves, results in the below error.
// Below code fails with
// 1061: Call to a possibly undefined method addEventListener through a reference with static type
//   fl.controls.dataGridClasses:DataGridColumn. So ... DataGridColumn doesn’t support addEventListener...
There must be a better way(?).
Thanks
            import fl.controls.DataGrid;
            import fl.controls.dataGridClasses.DataGridColumn;
           // Works, but only on the grid itself; as when the rows do not fill the space tor the datagrid.
            myDataGrid.addEventListener (TransformGestureEvent.GESTURE_SWIPE, swipeGridHandler);
            var c1:DataGridColumn = new DataGridColumn("Notes");
            c1.width = 90;
            c1.cellRenderer = CenterAlignCell;
            c1.addEventListener (TransformGestureEvent.GESTURE_SWIPE, swipeGridHandler);

Adobe list of properties and methods:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/mx/controls/dataGridCla sses/DataGridColumn.html

What is the right way to display a table in Java web dynpro using a node.

Hi experts,
I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro. In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Please refer to my post.. you will get the answer
Dynamic Table - same data repeating in all rows
Special care should be taken in designing the context for table attribute.
The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
Now coming to final solution :
For designing a table in adobe interactive form you have consider following
You have to design the view context upto three level, I am explaining you the properties
PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
Then under TableData value node, you have to put all your table attributes.
This Value Node name can be anything but hierarchy should be same as I have mentioned above.
Please try out these steps and get back to me if you have any doubt.

What is the right way to connect the adapter to my macbook when charging?

what is the right way to connect the adapter to my macbook when charging.
is it connect the magsafe connector first before plugging the adapter to the outlet? or the way around? or both ways will do?
what if i'm using a surge protection with a on/off button, can I just turn the surge protector extension on and off without disconnecting the magsafe connector and adapter plug from my laptop when i'm not using it?
thank you very much

If there is any arcing it may be because the adapter is dirty. It is best to plug in the wall wart then attach the magsafe to the MacBook. As GfulDedFan mentioned this reduces the chance of power surging the MacBook. I have done mine this way since he day I bought it and have never had an arc. I keep it clean to reduce the chance of this happening. The following will help in the care of your supply.
Apple: Use and cleaning of MagSafe power connector

I would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

i would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
Apple Part #: 922-9062, 821-0814-A

What is the right Balance of CUDA Cores with VRAM for After Effects?

Similar Messages

Maybe you are looking for