What is the "right" laptop configuration for Engg Student

Hello All
I would like to get your perspective on getting " right" type of configuration for an Engineering student . Apart from solid performance & speed , battery life, portability is also a factor ..
Thanks a ton!
Ram

What sort of engineering are you doing?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

What is the best RAID configuration for a MacPro as a Logic User?

There ought to be a universal answer to this question: what is the best RAID configuration for Logic Mac Pro users? I will be more specific.
I use Logic Studio, Reason, Ableton, and Motu Symphonic Instrument simultaneously.
I want to fail safe my precious audio files and improve performance as the system reads/writes data from multiple files, from audio tracks to digital samples.
I want to run video files simultaneously to do nifty audio soundtracking to video.
Here is the configuration I have in mind.
HD 1: OS and Logic Studio, Reason/Ableton samples etc. software (non-raid) (250 GB)
HD 2/3: MIrrored RAID set for AUDIO FILES (500 Gb identical pair)
HD 4: Video files / Bouncing (1 TB)
Makes sense right? A disk for reading software. A pair of 500 GB disks for reading/writing audio files and sessions in mirrored array. A 1 TB disk for video and bouncing. The main question I have is, for audio files only, is striped or mirrored better? 64K blocks the best? And are there any more details. I assume to do this in Disk Utility.

Well, both Mirrored and Striped have their pros and cons. If you use mirrored, it will offer no better performance than the spec'ed drive along with it's sata bus speed. The plus point is, if one drive goes down, you have the second as a backup as the complete contents of one drive are mirrored on the other.
With striped you will get a performance boost because all files (for example a single project) will get written across both drives and hence split the load on the drives and the SATA busses. The drawback is that you'll have to make sure you have a good, regular backup schedule in place because when one of the drives goes to drive heaven, you're going to be stuffed without a full backup of both drives.
Exactly what performance boost you'd get will depend on your project, number of files, size of files, fragmentation of files, track count etc. You may find it would be easier to use the 3 drives straight, with no raid and have:
HD 1: OS and Apps. No samples at all.
HD2: Audio Files for Logic projects
HD3: Reason, Ableton, Logic etc instrument sample library
HD4: Video and bouncing.
Which is what I ended up doing although I use HD4 as an interchangeable backup for HD1 and 2.
There is no universal answer to this as each must make their own choice based on their preferences and needs. Mirrored will give you full backup but on-site, in machine backup. Not much good if something untoward and drastic happens to the physical machine. I think a few people toy with striped RAID but fall on the side of using the drives straight, as in their projects they don't see a big enough gain over splitting the data across your 3 remaining drives without RAID. Studios that seriously consider raid often go out and get a dedicated raid that can offer more variations than raid 0 or raid 1 (Striped and Mirrored) and better throughput.
I hope this helps a little and not just added to the dilemma.

What is the standard component configuration for tuition fee reimbursement in sap webdynpro?

what is the standard component configuration for tuition fee reimbursement in advance claims in hrms in webdynpro?

Hi Debo,
What is your exact requirement?
Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
sample:
Regards,
Rama

What's the right OTN-forum for questions on ADF?

Hi,
my question? Look at the subject...
"What's the right OTN-forum for questions on ADF?"

this... :)

What is the best system configuration for a video editing telecast quality using Adobe PRemier pro

We need an editing suite for telecast quality for our church.
What is the best system configuration please?
What are all the requirements to set it up ?

Buy a Desktop Video Editing PC http://www.adkvideoediting.com/
Build a Desktop Video Editing PC
-http://ppbm7.com/index.php/tweakers-page
-3 price level ideas in http://www.pacifier.com/~jtsmith/ADOBE.HTM
-what PC to build http://forums.adobe.com/thread/947698
-2 how to build videos http://forums.adobe.com/thread/1104182
-another video http://forums.adobe.com/thread/1145366
-another video http://forums.adobe.com/thread/1132363
-planning & Building http://ppbm7.com/index.php/intro-part-1
-memory for LGA2011 http://forums.adobe.com/thread/1098759
-an Adobe FAQ http://forums.adobe.com/thread/878520
-http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
-http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge
+E/0xe9b142f408a2b03ab88144a434e88de7.aspx
-several more links http://forums.adobe.com/thread/815798
-build tuning http://ppbm7.com/index.php/final-results

What is the right AppleCare ref for MB Pro Retina 15"

Hi,
I have a MB Pro Retina 15" Mid 2012.
PROCESSOR 2.3GHz Quad-core Intel Core i7
MEMORY 16GB 1600MHz DDR3L SDRAM
FLASH STORAGE 256GB Flash Storage
Mini DisplayPort to VGA Adptr No VGA Adapter
Apple Thunderbolt to Enet Adpt Apple Thunderbolt to Enet Adpt KEYBOARD AND DOCUMENTATION KYBD/USER'S GUIDE-FRA COUNTRY KIT COUNTRY KIT-INT
Serial Number : C02HX0YKDKQ4
I don't plan to buy directly on internet nor on an AppleStore, and my problem is to find the right AppleCare plan.
I see that there's many AppleCare reference for MB Pro Retina 15" , for instance MD013ZM/A or MC259ZM/A.
I don't want to buy a wrong AppleCare part.
Thanks for your help.
ADS

Thanks for your reply.
What is the difference between MD012LL/A and the other since both cover the Retina one if I'm not wrong ?

[SOLVED] What is the minimum .reg configuration for monting eMMC2??

Hello Friends,
Greetings for the day!!
As, I have a board that contains the eMMC2(slot=3). We have made some changes in the driver for make it capable for slot=3. Now, the turn of .reg files. We have made all the required entries for Driver\BuiltIn\SDHC3. And driver is taking the values correctly.
Now the part of remaining entries related to file system, profiles, partition, partition table etc
I have made entries are as -
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
"AutoMount"=dword:1
"AutoPart"=dword:1
"AutoFormat"=dword:1
"MountFlags"=dword:1
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll";; -- Required
"Folder"="";; -- Required
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC]
"Name"="MMC Card"
"Folder"="MMC_CARD" ;MC Card
"AutoMount"=dword:1
"AutoPart"=dword:0
"AutoFormat"=dword:0
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC\FATFS]
"Flags"=dword:14
"FormatTfat"=dword:1
"DisableAutoScan"=dword:1
"FormatNumberOfFats"=dword:2
"EnableWriteBack"=dword:1
;;"CheckForFormat"=dword:1
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC\Part00]
"Folder"="MMC_Part"
"AutoPart"=dword:1
"MountPermanent"=dword:1
;; "AutoMount"=dword:1
"BootPhase"=dword:1
"MountHidden"=dword:1
"MountAsBootable"=dword:1
"MountAsRoot"=dword:0
"MountSystem"=dword:1
"AutoPart"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\Autoload\fsdmgr]
"Dll"="fsdmgr.dll"
"Paging"=dword:1
"LoadFlags"= dword:1
I have read lot of document related to the issue that eMMC2 is not mounted for most of the persons. In every document I have observed that they are using different keys and keys values.. I am confused that what is the minimum keys and keys values required
for the eMMC2 to be mounted apart from driver level.... ???
With this values my logs are as -
13525 PID:400002 TID:2300006 SDBusDriver: The SDIO card does not support block mode. Use Soft-Block instead.
13527 PID:400002 TID:4bc0002 AddFonts(.ttf) returned 4 fonts
13527 PID:400002 TID:4bc0002 AddFonts(.ttc) returned 0 fonts
13528 PID:400002 TID:4bc0002 AddFonts(*) returned 4 fonts
13529 PID:400002 TID:4bc0002 AddAllEUDCFonts(tte) returned 0 fonts
13531 PID:400002 TID:2300006 SetInterface MMCHS_HCTL value = F02
13531 PID:400002 TID:2300006 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 20000000 Hz, Actual : 19200000 Hz
13532 PID:400002 TID:2300006 The clock rate is set to 19200000
13533 PID:400002 TID:2300006 HandleAddDevice: LoadDevice type = 1, slot 0
13540 PID:400002 TID:2300006 OSAXST1: >>> Loading Module 'sdmemory.dll' (0x9E474C58) at address 0xEEB10000-0xEEB2A000 in Process 'NK.EXE' (0x8711FAD0)
PB Debugger Loaded symbols for 'C:\WINCE700\OSDESIGNS\ENVENTURE\ENVENTURE\RELDIR\PHYTEC_AM335X_BSP_ARMV7_DEBUG\SDMEMORY.DLL'
13591 PID:400002 TID:2300006 SDMemory: +SMC_Init
13591 PID:400002 TID:2300006 SDGetDeviceHandle: ActivePath: Drivers\Active\32
13593 PID:400002 TID:2300006 SDGetClientFunctions: +Init
13594 PID:400002 TID:2300006 SDGetClientFunctions: -Init
13596 PID:400002 TID:2300006 SDMemCardConfig: Card is high capacity (2.0+)
13596 PID:400002 TID:2300006 SDMemCalcDataAccessClocks: Tpd:f ns, Asynch: f ns, AsyncClocks:0 , SyncClocks: 1078591488, ReadTotal: 0, Write Factor: 1099109072 WriteTotal: 769230
13597 PID:400002 TID:2300006 SDMemory: Initialize: Using block transfer size of 64 blocks
13598 PID:400002 TID:2300006 SDMemory: Idle Timeout: 2000 Idle Power State: 2
13599 PID:400002 TID:2300006 SDMemory: Power Management Setup complete
13599 PID:400002 TID:2300006 SDMemory: -SMC_Init
13602 PID:400002 TID:8b0002 SDMemory: GetDeviceInfo - Profile = eMMC, length = 10
13602 PID:400002 TID:8b0002 SDemory: GetDeviceInfo - RegQueryValueEx(Profile) returned 2
13603 PID:400002 TID:8b0002 SDMemory: GetStorageID Insufficient buffer space
SDMemory: -GetStorageID
13608 PID:400002 TID:8b0002 Partition Part00 NumSectors=15106032
13608 PID:400002 TID:8b0002 MSPART!PD_OpenPartition: dwStoreId=AB543350, PartName=Part00
13617 PID:400002 TID:8b0002 CreateCache: Successful. Cache Size: 256 KB, Start: 6, End: 29453, CreateFlags: 2.
13619 PID:400002 TID:8b0002 CreateCache: Successful. Cache Size: 256 KB, Start: 29454, End: 15106031, CreateFlags: 2.
13627 PID:400002 TID:4bc0002 LogFontFromRegistry(SYSTEM\GWE\Menu\BarFnt), lfHeight = -12
13628 PID:400002 TID:4bc0002 LogFontFromRegistry(SYSTEM\GWE\Menu\PopFnt), lfHeight = -12
Anyone can tell me that what is the minimum .reg entries that is required to mount the eMMC2 ????

Hello Friends,
I am happy to intimate you that I have self solved the above problem with minimal configuration as shown below -
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
"AutoMount"=dword:1
"AutoPart"=dword:0
"AutoFormat"=dword:0
"MountFlags"=dword:0
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll";; -- Required
"Folder"="";; -- Required
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC]
"Name"="MMC Card"
"Folder"="MMC_CARD" ;MC Card
But, atleast you have to find the tool that format and create single partition as per your requirement ...

What is the right pixel settings for .dv to .mov export

Hi there,
if I don't want to loose "quality" by sticking to the original size of the movie (16:9, with Panasonic GS280) and export the original .dv to .mov, what kind of resolution do I have to use?
It seems that, after some googling, 1024x576 should be right. But on the other side I read that iMovie anyway scales down to 960x540. Is that right?
Thanks for any advice!
Stef

16:9 DV PAL is recorded anamorphically to 720 x576, you are correct that 1024 x 576 would be your choice for a non anamorphic conversion with maximum quality, however you will loose some quality when you do this.
IMO the jury is still out on this 960 x 540 thing, I'd keep watching the forum for the latest opinions on this.

What is the right pc-companion for Proto?

Hi. I've just starting using Proto and am quite happy with it. I would like to take the files from Proto and continue editing on the PC. The ideal thing would be a PC version of Proto. Is someting like that available or planned? What other software would you recomend for that purpose? Thank you.

You will want to upload your files to the Creative cloud as you then can open the files up with Adobe Dreamweaver to edit the file.

What's the right memory module for an iMac G4 Flat panel 15-inch?

Hello!
A new program I've recently bought requires me to expand my iMac's memory, which is currently 256 MB.
After searching the Apple Store web site, I think I've come to the conclusion that what I need is an Apple memory module called "512MB DDR266 SO-DIMM (PC2100), 200-pin". As I don't know any expert who can give me some advice, and as I'm no expert myself, could anyone please tell me if that's right?
Thank you!
iMac G4 Flat panel 15-inch Mac OS X (10.4.8)

Ciao e benvenuto alle discussioni di Apple.
There are actually 3 different types of user slot installable RAM for the iMac G4 models so you'll have to check what your processor speed is (Go to  Apple Menu > About this Mac > ):
iMac G4 15" and 17" 700 or 800MHz, PC133 144pin SODIMM.
iMac G4 17" 1GHz, PC2100 200pin SODIMM
iMac G4 1GHz 15" or 1.25GHz 17"/20", PC2700 200pin SODIMM.
So although I can't tell you exactly what RAM you need I can tell you that if you have a 15" screen the PC2100 is wrong.
I'd advise using Crucial memory in Europe as the prices are amongst the best and they are Mac friendly. I wouldn't recommend Apple memory; it's overpriced. I also wouldn't advise buying a cheap brand as it could cause trouble.
Here are the fitting instructions.
mrtotes

What is the right HD drive for the new (2008) mac pro

what's exactly the difference between Sata I, Sata II, sata 150, sata 300, sata 3gb ???
what drive's should i use in the new mac pro ? any advice / clearification would be great !

Thats a very good drive, I've been using them in Sony Vaios and laptops for years in various forms and they are blazing fast, never had one problem with them.
I think they have software on the website which lets you config the drive for acoustically quieter operation or 'full bore' speed. Been awhile since I've bought one so maybe thats not available anymore.

What is the optimum core configuration for a new Mac Pro to process and manipulate very large (80 megapixel) images using PhotoShop and Camera Raw?

Hello:
I will be using creative techniques to process and manipulate a large number (hundreds) of very large (80 megapixel) images captured using a medium format digital back (Phase One IQ180).
Final output will be digital fine art imagery printed using an Epson 11880 at large sizes (up to 60 inches x ?), retaining the highest possible quality and resolution. I will be using Adobe CC PhotoShop and Camera RAW as well as Capture One software. PhotoShop filters will be used extensively.
The Mac Pro needs to be optimized for the above purpose and be useful for at least five years. I plan to max out all the other options (RAM, graphics cards, storage). Performance is more important than cost.
The few discussions I have found that mention optimum core configurations seem to lean toward 6 or 8 (but likely are not taking into consideration my need for manipulating a large number of very large files), so I am looking to this foum for opinions.
Thank you,
Kent

See if this helps
http://macperformanceguide.com/index_topics.html#MacPro2013

What is the right "class driver" for my EPSON printer Aculaser CX 21N ?

Please let me know the correspondence between the EPSON class drivers proposed in the "Bonjour Print Services" tool (a lot of the EPSON class drivers seems to be identical) and the EPSON "Bonjour Printer Name" AL-CX21-3FD57B (IP) and (PostScript) (my printer).
Notes :
Before with Windows 7 that works properly => now - after my migration to "Windows 8 professional" - that don't works anymore !
"Apple Care" tell me first to completely uninstall and reinstall all the following programs: iTunes, QuickTime, Apple Software Update, Apple Mobile Device support, Bonjour and Apple Application Support => that's what I also do in full accordance with the Apple article HT1923 dated 2013, 21 February !
I tried to active my Printer through the disk received with my printer => no chance the systems tell me that I have no enough access right to do that !
I also found in the "Information - Network" of my above mentionned printer the following data under "Entity Type":
LaserWriter
EPSONPCL5C
EPSONPCLXL
EPSONPAGES3

I also have an Epson printer. You indicated that you already downloaded an updated driver from Epson's website. Did you also downloaded the one(s) that came w/the Epson CD? However, you did not mention that you repaired permissions & restarted after the installation.
If the above was not done, then I suggest that you do so. Hopefully, this should solve your problem.
I just checked the Epson folder in my HD & your model printer is NOT listed among them.

What is the best battery configuration for lenovo 420s

I read on the lenovo website that you can get up to 9 hours on the thinkpad 420s and I was wondering if anyone knew the battery configuration to achieve this setting? So far I only get up to 3 hours maximum IF I have it on very low performance. I usually keep it on maximum performance when it's plugged in. Anyone have any ideas?
Solved!
Go to Solution.

I would imagine that would be achieved using a 9-cell battery plus the supplementary battery that can replace the optical drive in the Ultrabay slot. http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...

What is the best backup configuration for a home lab?

Depends on your budget and complexity requirements. Offsite? Redundant? Free or paid? You also don't need a product to backup VM's and you can script this as well. Some good products that are free for a couple VM's are Veeam and Unitrends.

Hi there,
I am currently making a home lab environment to learn Microsoft technologies (at present), I wish to create a file server to store evaluation software, documentation and personal data. I currently use a total of 100GB of hard disk space for all this data...
How often do you recommend me backing up this data using Windows Server 2012 R2?
I also plan on implementing Volume Shadow Copy in the near future...
This topic first appeared in the Spiceworks Community

What is the "right" laptop configuration for Engg Student

Similar Messages

Maybe you are looking for