What is the right workflow for Lighting Effect in Premiere and Grain Removal in After Effects?

Hi,
I am working with a footage that was recorded in a dark room. In Premiere Pro CC 2014 I have applied a Omni Lighting Effect, which brought some light into the scene. But, as you can imagine, now the picture is very grainy. In Premiere Pro there is no Grain Removal so, I replace the clip with an After Effects Composition, but in After Effects my Lighting Effect is not showing up, even after rendering the effect in Premiere Pro it is not transferred. Probably because that effect is not in the repertoire of After Effects.
So, how do I go about it to get my desired correction? Is there a way in the Adobe CC?

I think you're going about this the wrong way. You're best option is to reshoot with proper lighting. If that's just not possible, then you will probably get better results taking the clip over to SpeedGrade for correction. If it's still too noisy, I recommend the following, which is the best plug-in of it's kind I've ever seen.
DeNoise - Simulate Film Stock - Dark Energy for After Effects

Similar Messages

What is the right charger for a MacBook Pro 13" mid 2009 model?

What is the right charger for a MacBook Pro 13" mid 2009 model? I have two chargers for two different Mac and don't know which is thankswhich. I'm really looking for specific details such as voltage/watts and all the rest to idenify my charger. A link to where to web page where I could purchase the correct charger would also be very useful. Many thanks.
All help much appreciated. THANK YOU

Both power adapter I have are different (at the magnet end) from the one in link.
Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

What is the right update for Lion OS X 10.7.5 ?Is it Lion OS X Mavericks or Lion OS X 10.8 and above?

I bought a Macbook Air 11" in 2011. It is currently running Lion OS X 10.7.5. What is the right update for this ?Is it Lion OS X Mavericks or Lion OS X 10.8 and above?

10.7.5 is the latest version of Lion. The next operating system that was released by Apple was 10.8.x Mountain Lion. Apple have, in the last two weeks, released a newer version of OS X - 10.9 Mavericks.
It is a completely new operating system, not an update to Lion.
Mavericks is available as a free upgrade (as opposed to update) via the Mac App Store in the Apple menu, but before upgrading (if you choose to) ensure that any applications you rely on are compatible with the latest OS. Also, for Mavericks to run well 4gb of RAM is recommended.

What is the right process for moving system to another plant

Dear Guru,
I have below scenario which i would like to understand what should be the right process to deal with it..
Organization Structure.
Company code: C500
Business area : 500A
Plant A500 and S500 which is under the same company code and same Business area.
Storage location: SW01 and AW01 which are physically same location address
I have this scenario where the user have a PO under Plant S500 which already GR and IR and the physical goods is currently placed in Storage location SW01.
But the user realized the Material should be created under Plant A500.
For the above case, can anyone please advice me what should be the better process instead of reversal the IV/GR/PO? and what is the right process for MM and considering also from the finance point of view?
Thank you very much,
Regards,
CheeWee

Hi
It is the configuration issue. SOmetime it happens when you copy the Reference plant to your Plant.
Change the setting and make it both Qty & Value if you really want to manage the stock qty with value then proceed.
Valuation area is nothing but a Plant.
karthik
Edited by: Karthik on Jul 25, 2011 1:23 PM

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

What r the trns code for maintenance view, help view and projection view

hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari

What is the Different Types and Usage of Views
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View (SE11)
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish

I would like to know what is the default timouts for wired/ wireless devices ..and how to reset it on Extreme. Many thanks

I would like to know what is the default timouts for wired/ wireless devices ..and how to reset it on Extreme. Many thanks

Wireless is "always on" with the AirPort Extreme. There are no settings to "time out" wireless on the AirPort Extreme. Those settings would be adjusted on each individual computer.

What is the best workflow for Final Cut Pro X across multiple computers?

I travel on a team that is in a different location every week, so all of our video editing has to be fairly moble. We have 3 macbook pros and would like to use final cut X on all of them. What would be the best workflow for us all to work on the same project and sync it across the computers? (eg, one of us editing the footage, one editing the sound, one working on visual effects?)

My first question would be how well 5.1 would work with SL. People have reported problems.
As far as cameras are concerned, I would guess most any tape-based camera would work and so much depends on the kind of projects you work on that I wouldn't want to start guessing at your needs.
If you want broad access to tapeless and advanced formats try to locate and purchase an upgrade disk to 6 or 7.
Good luck.
Russ

What's the correct workflow for high FPS footage motion blur?

Situation is the following:
I have a few 600fps recordings I want to put together with heavy editing.
Things I want to do (not in order):
Change the velocity heavily up and down, from 300% to 10% and back withing seconds.
Basic VFX, heightmap, masking, light flashes and so on.
3D tracking and effects, particles and text in 3D space
Color Correction
Good motion blur
Overlays
Now, my question is at which point I apply the motion blur. I'd like to start in Sony Vegas for the velocity and then move to After Effects.
But Sony Vegas is capable to export at max 120fps. Will the motion blur result be worse/different with minro FPS footage?
In Sony Vegas for example, the resample feature is pretty useless/bad unless you go over 120fps.
But obviously I can't start by importing my footage into AE and firstly add motion blur. By my understanding I have to do all FX and color correction before adding motion blur, and until then the footage has to stay 600fps. Is this correct?
Thanks in advance.

and until then the footage has to stay 600fps. Is this correct?
No. Motion blur is calculated from frame to frame at the actual playback speed. Anything else would look fake, anyway, though of course you may already ned to/ want to add some motion blur to some elements halfway through just to from the precision of higher framerates. Smoother curves and all that. So ultimately in which order you do it is till a matter of what gives you the best result, not so much a fixed "correct" order.
Mylenium

What are the right names for the 2 OHS?

Hi,
Currently we have 2 options for an HTTP Web Server for APEX:
- An Oracle HTTP Server (OHS) from the database companion CD.
- An Oracle HTTP Server (OHS) from the Oracle Application Server.
The first OHS is based on Apache 1.3.x and the second on Apache 2.0.x.
What are the right way to reference them so people know what your are talking about? In the manuals they are just called OHS but since they are not the same I would like to distinguish them some way. What do you call them?
Regards Pete

OK now I think got it:
OHS from the database companion CD and from the Application Server are both based on an Apache 1.3.x HTTP server.
On the Oracle Application Server companion CD is an OHS based on an Apache 2.0.x HTTP server. This release does not contain the mod_plsql module an can therefor not be used for APEX.
Regards Pete

How do I find out what is the right RAM for my macbook?

Hey I've been trying to upgrade the Ram for my Macbook but many people said to make sure I get the right one.
Can anyone tell me how\what to do to get the right one?
How do I know what is the right one and what's not?
I don't wana make mistake, cuz it is expensive.
thankz

hey thank you very much for your help!!
At first I didn't get it but now I do
wo00 hoo0!
am so happy right now!!!
n_n

Why jpeg file exported from Aperture with 300 dpi's it opens with 72 dpi's on PS ( image size)? I've tried several combinations and all give different results. And I am confused on what is the best workflow for me.

Ok.
My workflow is
RAW > Aperture Library > export jpeg high resolution 300 dpi's > one file on PS > edit > Save us jpeg. The I realised that files from PS were being save in a smaller size from the ones exported form Aperture. That is when I went o see <image size> on PS and files were with 72.
Since ten I've trying different things
1. Aperture > export as PSD > open on PS > edit > Save us jpeg = small file (around 15 MB)
2. Aperture > export as jpeg high resolution 300 dpi's > open on PS > CHANGE dpi's to 300 on <image size> edit > Save us jpeg = big file (Huge, actually)
What am I doing wrong? Would someone give me guidance and tell me what is the best workflow, considering I edit photos to deliver to my clients and I shall give them 300 dpi's.
Thank you

This is a known Aperture issue: Problem with Aperture 3.6 preset exports. | Apple Support Communities
Benjamin

What is the standard workflow for Travel expense ?

Hi guys
i am looking for the standard workflow for travel expense. I did a search on the forum but count find a answer. I also searched SWDM - Workflow browser. I coudnt find one. Can anybody let me know which is the standard workflow for Travel Expense?

Hi
Check out these links.
[http://help.sap.com/saphelp_47x200/helpdata/en/04/928ba746f311d189470000e829fbbd/frameset.htm]
[http://help.sap.com/saphelp_47x200/helpdata/en/19/8460e002474d4a866da32a8d9c6c73/frameset.htm]
[http://help.sap.com/saphelp_47x200/helpdata/en/cb/c11038b42b7858e10000009b38f8cf/frameset.htm]
Regards
viijay

What is the right name for Apple Maps.

What is the exact name for Apple Maps. I cannot find on in the app store written by Apple. I want to make sure i get the real thing or else I guess its Google!

Thanks Andy I did not know that. But how can I get it on an i-phone 5S. Turn by turn directions on a desktop of lap top are no good when you are driving.

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

What is the right workflow for Lighting Effect in Premiere and Grain Removal in After Effects?

Similar Messages

Maybe you are looking for