What is the role of a HR functional consultant in the ESS/MSS configuration

Hi Guys,
If someone can suggest me what is the role of a HR functional person in the ESS/MSS or EP configuration and what needs to be done to achieve that..
Thanks,
~RJ

I think, HR Functional consultant role should mandatory for ESS/MSS. ESS/MSS are user interface technologies but behind the scene. It is all about HR FC. In order to learn ESS/MSS you should start base NetWeaver Architecture & Iviews concept.
You will find it more easy since you knw back-end.
Thanks,
Arpit

Similar Messages

What is the benefit of configuring the XSS Homepage Framework for ESS

What is the benefit of configuring the XSS Homepage Framework for ESS?
Over using standard iViews.

It means you can disable (or enable) the exact functionality your customer needs rather than sticking with the default implementation.
Most customes do not use everything available from ESS or MSS. Switching it off (making it unavailable) is WAY better than leaving potentially unconfigured content to be accessed by users. SAP generally do not handle the error cases and you will get lots of nasty stack traces .....
Haydn

What are the stpes to configure third party tools in BW

Hi all,
can you please send me any documents on "what are the stpes to configure third party tools in BW"

Hi,
1> Define the RFC connection ;ex:-Define the IP address using SM59
2> Define the third pary sourcesystem
3>Assign it to infosources
4>Map and define transformation rules
5> Create Infopackage and load the data.
I hope it would help you.
Regard's
Prasad

What is the best system configuration for a video editing telecast quality using Adobe PRemier pro

We need an editing suite for telecast quality for our church.
What is the best system configuration please?
What are all the requirements to set it up ?

Buy a Desktop Video Editing PC http://www.adkvideoediting.com/
Build a Desktop Video Editing PC
-http://ppbm7.com/index.php/tweakers-page
-3 price level ideas in http://www.pacifier.com/~jtsmith/ADOBE.HTM
-what PC to build http://forums.adobe.com/thread/947698
-2 how to build videos http://forums.adobe.com/thread/1104182
-another video http://forums.adobe.com/thread/1145366
-another video http://forums.adobe.com/thread/1132363
-planning & Building http://ppbm7.com/index.php/intro-part-1
-memory for LGA2011 http://forums.adobe.com/thread/1098759
-an Adobe FAQ http://forums.adobe.com/thread/878520
-http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
-http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge
+E/0xe9b142f408a2b03ab88144a434e88de7.aspx
-several more links http://forums.adobe.com/thread/815798
-build tuning http://ppbm7.com/index.php/final-results

What is the standard component configuration for tuition fee reimbursement in sap webdynpro?

what is the standard component configuration for tuition fee reimbursement in advance claims in hrms in webdynpro?

Hi Debo,
What is your exact requirement?
Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
sample:
Regards,
Rama

What is the latest MSS package version?

Hi all,
I want to know what is the latest MSS package version?. Or is it depending on SAP R/3 version I use? Could some one give me the details?. I promise to award points.
Regards
Maruti

Hello, usually, this page lets you know what is the most current version: http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html

What is the best RAID configuration for a MacPro as a Logic User?

There ought to be a universal answer to this question: what is the best RAID configuration for Logic Mac Pro users? I will be more specific.
I use Logic Studio, Reason, Ableton, and Motu Symphonic Instrument simultaneously.
I want to fail safe my precious audio files and improve performance as the system reads/writes data from multiple files, from audio tracks to digital samples.
I want to run video files simultaneously to do nifty audio soundtracking to video.
Here is the configuration I have in mind.
HD 1: OS and Logic Studio, Reason/Ableton samples etc. software (non-raid) (250 GB)
HD 2/3: MIrrored RAID set for AUDIO FILES (500 Gb identical pair)
HD 4: Video files / Bouncing (1 TB)
Makes sense right? A disk for reading software. A pair of 500 GB disks for reading/writing audio files and sessions in mirrored array. A 1 TB disk for video and bouncing. The main question I have is, for audio files only, is striped or mirrored better? 64K blocks the best? And are there any more details. I assume to do this in Disk Utility.

Well, both Mirrored and Striped have their pros and cons. If you use mirrored, it will offer no better performance than the spec'ed drive along with it's sata bus speed. The plus point is, if one drive goes down, you have the second as a backup as the complete contents of one drive are mirrored on the other.
With striped you will get a performance boost because all files (for example a single project) will get written across both drives and hence split the load on the drives and the SATA busses. The drawback is that you'll have to make sure you have a good, regular backup schedule in place because when one of the drives goes to drive heaven, you're going to be stuffed without a full backup of both drives.
Exactly what performance boost you'd get will depend on your project, number of files, size of files, fragmentation of files, track count etc. You may find it would be easier to use the 3 drives straight, with no raid and have:
HD 1: OS and Apps. No samples at all.
HD2: Audio Files for Logic projects
HD3: Reason, Ableton, Logic etc instrument sample library
HD4: Video and bouncing.
Which is what I ended up doing although I use HD4 as an interchangeable backup for HD1 and 2.
There is no universal answer to this as each must make their own choice based on their preferences and needs. Mirrored will give you full backup but on-site, in machine backup. Not much good if something untoward and drastic happens to the physical machine. I think a few people toy with striped RAID but fall on the side of using the drives straight, as in their projects they don't see a big enough gain over splitting the data across your 3 remaining drives without RAID. Studios that seriously consider raid often go out and get a dedicated raid that can offer more variations than raid 0 or raid 1 (Striped and Mirrored) and better throughput.
I hope this helps a little and not just added to the dilemma.

What is the difference between, Configuration Components and Software Comp?

Experts,
Can somebody tell me, What is the difference between, Configuration Components and Software Components?

Hi,
Configuration Objects:
You use configuration objects to help you to structure and organize your configuration data in the Integration Directory
You can group configuration objects by using configuration scenarios.
The following configuration objects exist:
1) Collaboration profile objects
    -Communication Party
   -Service
   -Communication Channel
2) Logical routing objects
- Receiver determination
- Interface determination
3) Collaboration agreement objects
   -   Sender Agreement
   - Receiver Agreement
Refer the below help which I did search on SDN:
http://help.sap.com/saphelp_nw04/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm
Softweare component:
http://help.sap.com/saphelp_nw04/helpdata/en/12/003479fa4c2d4aa9d175dcbb081d66/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/37/ae463c75a8477ee10000000a114084/frameset.htm
Thnx
Chirag

How to get the ESS & MSS users in ECC 6.0 into portal

Hi Experts
How to get the ESS & MSS users in ECC 6.0 into portal
Thanks
Daya

Hi,
You need to have SSO in between ECC and portal and use ABAP engine as your UME.
then ECC users can directly login to portal using the same user id and password.
Or you can create the ECC system in portal and user mapping should be done for every user to the ECC system.
Thanks,
gopal

Could you send me the ESS MSS Business Packag installation guide and confi

Could you send me the ESS MSS Business Packag installation guide and configuration steps . I wanted to learn ESS and MSS configuration steps
Regards
Jagan

Answer in Short = Yes I can.
Bu the study material is voluminous and cannot be attached so SAP has created a website with all the material in it here is the address: http://help.sap.com
You should find the site very very informative. Good Luck.
cheers

What is the roles of technical and functional consultants in ESS/MSS area?

Gurus,
What is the roles of technical consultants in ESS/MSS area?
What is the roles of functional consultants in ESS/MSS area?
Please help me see the differences.
Thanks,

Hi Thaman,
Responsibility of functional consultant in ESS/MSS:- Functional configuration under SPRO > Employee self service and manager self service, then preparation of Functional specification design (FSD) if any deviation from standard SAP, Unit test plan preparation and all functionailty testing
Responsibility of Technical consultant:- Preparation of Technical specification design document (TSD), activation of work flow and creation of workflow if additional is required. Creatio of form like vacancy requisition form, new position creation form etc.
Also some kind of technical configuration is there in SPRO for workflow and form
Regards,
Purnima

What is the role of a SRM functional consultant during SP15 upgradation?

Hi,
We are currently on SRM server 5.5, support pack 11 and planning to upgrade to SP15.
As a functional consultant, what are the checks need to be performed?
Got OSS note's side effect report from SAP which consists of apprx 60 notes that need to be applied post SP15 upgradation.
Could any one share their experience how to assess these OSS notes & their side effects. It would be beneficial if you can share any sample template showing the assessment work done & its validation by Business.
What are the effects on existing business process (new functionalites and enhancements).
And do we need to involve the end user/ Business for performing the integration testing & Quality testing.
Thanks a lot.
Santosh

- You need to SPAU analysis with help of technical/BASIS consultant.
- You need to WRITE A business TEST CASES for all currentlyexisting business object
-You need to verify the actual results with expected results.
-if you dont get any abnormal behavior from the system, you can seek help SAP.
-custom development shoult take care and it shpould not be impacted.
-every SP upgradation is useful to business operation to run smoothly.
Muthu

Role of SD Techno-Functional consultant.

Hello all,
Am an ABAPer with one and half years of experience and have an opportunity to learn SD.
Can somebody tell me What exact role i will be performing as a technofunctional and does it make sence markewise(i mean does it add value to salary).
Please explain with some example.
Thanks.
Edited by: sandeep deshpande on Apr 20, 2008 7:18 PM

Hi Seema,
The Basic responsibility of a CRM Functional Consultant are
1. Understand the Clients Business Process
2. Mapping the Business Process with SAP CRM Process
3. Collecting the requirements of the client
4. Analyzing the requirements with respect to SAP CRM
5. Configuring the SAP CRM system according to clients requirement.
6. Co-ordinating with technical tem members to reach the technical requirements.
Precisely as a Functional Consultant, one has to interact with the client very often to map the business requirements with SAP CRM business Process.
Hope I have answered you.
Please reward points if it helps.
Best Regards,
Johnny.

Role & responsibilities for SD functional consultant

Hi
friends,
iam sravan,
applying 2+yrs of exp as a sd functional consultant.
i want to put 10 months of exp for impementation and rest of the
yrs putting as a support. is it ok, otherwise plez suggest me.
can u tell me the role and responsibilities for implemetation
and support, bcoz iam putting two projects so i have to put
role & responsibilities both are should be different.
plez send me as soon as possible...................

Hi Sravan,
Types of Consultants:
The most common question being asked in interviews is ' What are your roles and responsibilities?'.
Before answering the above question, let me explain the difference between Functional consultant and
Technical consultant.
Roles and responsibilities differ from functional consultant to Technical consultant.
<b>Functional Consultant:</b>
Functional consultants are responsible for designing the SAP implementation solution based on the
requirements of your company.
Functional consultants are business process experts.
Functional consultants normally use their process knowledge to calculate the impact of the SAP
implementation on the company's processes.
Functional consultants are thus concerned with SAP functions and processes that will generate the data
and output for business.
Functional consultants interact with end users of the company to gather requirements and based on the
requirements they customize the SAP implementation.
<b>Technical Consultant:</b>
Technical consultants are experts in information technology.
Technical consultants normally assist in configuration of the SAP R3 installation. In many SAP
implementations, technical consultants help in designing interfaces and customizations in R3. Finally, the
SAP R3 technical consultants would be responsible for migration of data from the legacy system to the new
SAP ERP implementation.
Here i will discuss major roles and responsibilities of a technical consultant:
1) Designing technical specification by looking at the functinal specification you have recieved.
Usually senior developers having 3 years or more than 3 years of experience involves in preparing technical
specifications.
2) Developing objects using ABAP workbench tools. That may be a report program or an on-line program or a
custom table.
Remember the development work starts after the technical specification is approved by your team leader.
3) Preparing the Unit test case document.
In unit test case document, we document the results and test cases performed on the developed object.
4) Peer Review
if you are a senior developer you can perform peer review. I.e review the code written by your peers.
5) Working on Problem Tickets
If you are working in a support project, you should solve the tickets assigned to you. Tickets are nothing but
the problems occured in production environment.
The above mentioned are the major roles and responsibilities for a technical consultant
*HOpe it Helps,
*Reward Points,

Role of Time Mgmt functional consultant during SAP Upgrade from 4.7 to ECC6

Hi,
Could anyone explain the role of a time management functional consultant during SAP upgrade from R/3 4.7 to ECC6.0. Please provide me if you got any documentation.
Thanks,
Sunny

"After you upgrade to SAP ERP 6.0, you can enhance the functionality of your application without performing a further
upgrade thanks to a new deployment technology u2013 the SAP enhancement package for SAP ERP. The enhancement
packages simplify the way you manage and deploy new software functions for SAP ERP." - that is the real benefit of ECC 6.0
There aren't any major changes to PTM functionalities from 4.7 to 6.0. I hope your system is already using IT 2006 instead of IT 0005. Under functional role, you are required to configure/test any functional upgrade and manage data.
Regards
Yash

What is the role of a HR functional consultant in the ESS/MSS configuration

Similar Messages

Maybe you are looking for