What is the rule's of recover HP ENVY WINDOWS 8 notebook

HI
15 days ago my comuter got hacked and the hacker knows my IP address, and I want to change my IP address. But I dont know how to change, then I ask my cousin about the IP address, then he told me about the Recovery. He said it's very helpful for your computer, But I dont know how its helpful and how to do recovery on computer. THANK YOU FOR HELPING.

Windows 8 Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643&tmp_task=solveCategory&cc=us&dlc=en&lc...
This should also be helpful. Creating Recovery Media >> Windows 8
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

What is the rule for adding application elements to faces-config.xml

I have posed this question before, but was unable to get an answer so here goes again.
What is the rule for adding more than one application element to the faces-config.xml?
The schema documents that 1-n are possible, but why and when should I do this?
--W

sorry if you don't login in tomcat administration before. you must enter login and password of a manager user on tomcat .
The user is the one you give when installing tomcat.
If you have forgotten it : see it to: C:\Program Files\Apache Software Foundation\Tomcat 6.0\conf\tomcat_users.xml
and choose one whop have role='manager'

What is the safest way to recover erased files

what is the safest way to recover erased files

It's not a matter of safe, it's a matter of cost.
Data recovery is expensive.
No backup available ?

What are the rules about switching versions?

I thought projects created in iMovie 9 showed up in iMovie 10, but I just tried creating a new project in iMovie 9 this morning and it is not showing up in iMovie 10, even though I see projects from 2013 and before in there.
Also, what are the rules about switching versions? I know iMovie 9 much better, so can I start a project there and finish it in iMovie 10? I would like to gradually learn iMovie 10, but not all at once.
I assume that once a project is edited in iMovie 10, it can't be worked on in iMovie 9 anymore.

You have to update iMovie 9 projects to iMovie 10 from within iMovie 10 before they will appear in iMovie 10 as iMovie 10 uses a completely different project/event file system. After updating you can still work on projects in iMovie 9 but you won't see any changes made in iMovie 10 and you can't transfer them back.
I would have a good look at the iMovie 10 help files first since a lot is changed and some features have been discontinued that might be important to you.
In order to try out iMovie 10 on just one of your iMovie 9 projects, put the folders just for that project in a separate iMovie Projects and iMovie Events folder and hide the project and event folders containing the projects you don't want to update from iMovie 10 by enclosing them in a higher level folder (only projects and events folders in the Movies folder of the boot drive or at the root level of another drive or partition will be visible to iMovie).
I did it this way and I'm glad I didn't try to update evrything at once!
Geoff.

Apps that go free & VPP - what are the rules?

Hi,
Just wondering what are the rules once an app goes free & volume licencing? If an app goes free for a certain amount of time & you download it & use configurator to distribute to iPads is this ok?
Thanks

AUR queries should be posted to the aur-general mailing list.
As indicated in the thread linked by Karol above, it is permitted to append unsupported architectures to the arch array of a PKGBUILD that builds on officially supported architectures. That does not necessarily mean that we will allow packages that only build on unsupported architectures. This should be discussed on the mailing list. I have a vague memory of this coming up before and I think the consensus was that such packages would not be supported, but that consensus may have changed. Personally, I do not see a problem with such packages right now and I expect official supported to be extended in the future, so I am in favor of allowing them.
Packages that install pre-compiled binaries should be distinguished from normal packages with a "-bin" suffix. Such packages are permitted as long as they do not violate applicable licenses.

What are the rules of overriding?

What are the rules of overriding?

What are the rules of overriding?The best general source for all questions of this type must be The Java Programming Language by Gosling and others.

What are the rules regarding posting of exam questions?

What are the rules regarding posting/discussing specific exam questions?
I just read the Rules of Conduct and I'm wondering if posting exam question falls under unauthorized information disclosure and if it somehow violates the confidentiality of SUN information as stated in
[CONFIDENTIALITY OF SUN INFORMATION|http://www.sun.com/termsofuse.jsp#g2_2]

jwenting wrote:
That would be completely useless, as the questions are chosen semi-randomly from a large collection of questions so the topicspread you get may well be completely different from what someone else gets.
Of course there is probably a pretty well balanced mix, so going flat out on one topic to the exclusion of all else is sure to make you fail :)And those sorts of "hints" are also useless because they only really talk about the posters weaknesses. For example I might say "study Generics!" because that was the section of the exam I did the poorest in, but if you are solid with generics and weak with threading that won't do you much good.

What are the chances of me recovering my stolen iphone 4s?

My iphone 4S was stolen tonight in San Francisco. I have a UK phone number and UK SIM card. My iphone is unlocked. What are the chances of me recovering my phone? I've reported it to the police and I've access the find phone app to notify me when found (using my mom's cell phone and my email).

Unfortunately, your chances of recovery are poor, at best. Most thieves know to turn an iPhone off, then force it into recovery mode & restore it. This defeats Find My Phone, making recovery almost impossible. Unless the police catch the thief, & match the IMEI number, doubtful you'll ever see the phone again.

What's the correct recovery process once upgraded to Windows 10? (No OneKey Recovery)

I have a Z50-70 laptop that came preinstalled with Windows 8.1. It is a OEM version, with the product key stored in the Bios. It is a UEFI install. It currently has OneKey recovery installed, which, if I understand correctly (I haven't actually used it yet), allows you to recover from a recovery partition in the hard disk. This isn't a "fresh" Windows 8.1, but an image provided by Lenovo that takes you back to the state the laptop was in when originally purchased (will have all Lenovo software and drivers preinstalled). According to the official Lenovo upgrade guide, before performing the Windows 10 upgrade, we should uninstall basically all Lenovo software, including OneKey recovery and it won't work in Windows 10. Questions: 1. What's the correct process to recover the system from within Windows 10 if something goes badly wrong? I think Windows 10 has a built in "reset your computer" functionality in Settings which I assume is what we would be expected to use. Would this take me to:a. A completely fresh install of Windows 10?b. An image created during the 8.1 to 10 upgrade, containing all my files etc at the point of performing the upgrade?c. Or would it use the Lenovo recovery partition (that OneKey Recovery would have used if it was compatible) and take me back to Windows 8.1?d. Something else? 2. Once I've performed the upgrade and Windows 10 has successfully activated, I believe I could create a bootable media with the Windows 10 ISO, boot into it and install a completely clean installation of Windows 10 and it would activate. I could theoretically do as many fresh installs from the bootable media as I want, so long as initially I did the upgrade (not a clean install), and the laptop hardware doesn't change. Is that correct?2a. If so, during the first clean bootable media install process, would I be safe to compeletly remove the Lenovo recovery partition entirely, and from that point onwards rely on Windows 10's "Reset your PC" functionality? Could I could even just use reinstalling Windows 10 from bootable media again as a way of recovering? If I understand correctly, it doesn't make sense to keep the recovery partition it if it can't be used within Windows 10. I think it I had a regular desktop PC with a retail version of Windows, then all the above would be fine. The added complications here are that 1. I have no Windows 8.1 product key (it's handled alll by the BIOS), and 2. I have no recovery disks. I want to make sure I understand everything fully before upgrading, and potentially doing a clean install using bootable media, so that I don't end up messing something up and ending up with either a laptop that I can't recover, of a Windows installation that isn't activated. Thanks.

Update for anyone else reading: I just uninstalled OneKey recovery on my Windows 8.1 installation, in preparation for the upgrade. So as far as Windows is concerned, OneKey Recovery has been completely removed. The good news is that I then shut down the laptop, pressed the novo button, selected "System Recovery" and I was still greeted with the OneKey recovery program where I could choose to restore from factory image, or a custom image. Therefore I assume that once I've upgraded to Windows 10, I will always have the option to restore to factory Windows 8.1 if I ever need/want to. The confusion seems to be that the OneKey recovery software is actually two separate softwares: 1. OneKey Recovery #1 is installed within the hidden recovery partition that is responsible for performing a system restore from the image of your choosing - either the factory image or a custom image created by OneKey recovery software #2. OneKey Recovery software #1 is always accessible via the Novo button. 2. OneKey Recovery #2 is installed on the Windows 8.1 installation, that is responsible for creating custom system images. You can also choose to restore the system from here, but as far as I can tell, this just restarts the computer and loads up OneKey software #1, which allows you to perform the recovery. OneKey Recovery #2 is the software that Lenovo told us to uninstall before upgrading to Windows 10. However, uninstalling OneKey Recovery #2 will leave OneKey Recovery software #1 in tact.As far as I can tell, this means that uninstalling OneKey Recovery #2 means that we lose the ability to create custom system images, but we retain the ability to restore from a system image. Can anyone confirm that I've understood correctly, and that what I've said above is indeed the case? I'm still a little unsure about what Windows 10's built in "Reset this PC" will do though - whether it will use Lenovo's recovery partition or perform a clean Windows 10 install.

My MacBook Pro can't turn on again and apple said that the hard drive was broken. What are the chances of apple recovering my files on target disk?

Okay basically my MacBook Pro won't turn on. It has a spinning loading sign and a bar that won't complete at the bottom. Rang apple said take it into the apple shop and they will try target disk. What is that exactly and what are the chances my photos and files can be recovered. I would go to the shop but I'm on vacation. Help would be appreciated thanks.

This defines Target Disk Mode:
http://support.apple.com/kb/PH10725
Though not guaranteed, the chances are good that the data can be recovered.
Ciao.

What are the Rules for using iTunes outside the US?

I'm a US citizen with a US bank and a US credit card and a US mailing address. The only things that are outside the US are me and my US-purchased Mac.
I understand that I can only use the US iTunes Store while I'm in the US (which is about 3 or 4 times a year).
What about the rest of the time? Is there an official way to purchase additional titles when I'm outside the US?
What does the current contract mean by "agree not to use the APP outside the US"? Is the "APP" iTunes or just the iTunes Store?

I understand all this "can't get there from here" stuff has to do with copyright laws and such but the real world is going to do what it has to do.
This is why I wanted to know what the Official Rules were. iTunes is not currently available in my country of residence so even if I wanted to, I couldn't use the "local store" as there is none.
I had a similar problem with Microsoft Office 365. Can't subscribe from "here" without using a "local" credit card. I do have a local credit card but it can only be used "here". When I tried to subscribe using my "local" credit card on Microsoft's "local" website - my "local" bank denied the charge as the "local" website was actually in the US. VPN solved the problem.

What are the rules for keeping things running smoothly

As my iMac is now a month old and has been burdened with a number of trials, shareware demo, open source, video tutorials and general clutter; what are the basic rules for keeping things running smoothly? My 'log in' is certainly a lot slower although I don't have any apps loading and finder has become much slower with less spring in it's tail. Are there any caches etc that need dealing with? I'm afraid to say I was a bit of a pro at hammering my windows setups till they came to a stand still and I can't bare to see the Mac going the same way. Have I got to be ruthless and limit the number of apps I have installed? The quality of what is available just on apple.com makes it hard for a software addict to stop downloading Any help or just a reality check would be much appreciated....rob

Hello,
Mac Maintenance Quick Assist: http://support.apple.com/kb/HT1147
Great advice here from, "Klaus1" regarding a clutter free Desktop: http://discussions.apple.com/thread.jspa?messageID=7668937#7668937
Mac Tune-up: 34 Software Speedups
http://www.macworld.com/article/49489/2006/02/software
Tuning Mac OS X Performance
http://www.thexlab.com/faqs/performance.html
The Top 7 Free Utilities To Maintain A Mac.
http://mac360.com/index.php/mac360/comments/thetop_7_free_utilities_to_maintain_amac/
Mac OS X: System maintenance
http://discussions.apple.com/thread.jspa?messageID=607640
A good disk utility to empty caches: http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html
Use Onyx once a week, run the Maintenance and Cleaning scripts and that will help speed your Mac up pronto.
Run Disk Utility (Applications/Utilities) once a week and Repair Disk Permissions:
Launch Disk Utility. Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
*Tip... very important: Run Disk Utility BEFORE and AFTER all software updates. That will save you headaches down the road.
You do not need to limit the number of apps installed but one thing to bear in mind. A Mac needs a minimum of 10% available disk space just to boot and it's all too easy fill up a drive and before you know it, you can't open apps, or they open and freeze up, or you can't install software. A good way to keep an eye on available space: Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the black arrow next to: General so it faces down. You will see: Capacity and Available ... Best best is to always have 15% free drive space.
Back up your important data every day. If you have a system failure and need to either do an Archive and Install or completely wipe the drive and reinstall your system software, you'll be glad you did.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software.
Retrospect Desktop (Commercial - not yet universal binary) http://www.dantz.com/
Carbon Copy Cloner (Donationware) http://www.bombich.com/software/ccc.html
SuperDuper! (Commercial) http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
I hope I didn't inundate you with too much too soon, but just do maintenance, keep your Desktop clutter free, and back up your files daily. Once you get into the habit of doing this, it only takes a few minutes a day.
Carolyn
Message was edited by: Carolyn Samit

What's the best way to move library in Windows to a new computer?

I have iTunes running fine on my Vista machine at home. I've gotten Win7 in, and I'm going to be moving to a new computer I have which I'm upgrading from XP to 7 with (it's got more horsepower than my Vista machine).
Anyway, to that, I want to move all my stuff from my current Vista machine to the 7 machine, ioncluding iTunes. What's the easiest way to do this - and maintain all my stuff, like ratings, number of times played, playlists, etc...
I've read some helps, and none of them seem concerned about keeping number of times played, and all that. You can't just up and move the files, as the directory path will be different, so the itunes data file won't see them if you copy that, too.
Suggestions?

The first thing to do is to ensure that your music is all together in the iTunes music folder. If you have tracks else where you need to consolidate your library.
Then install iTunes on the new PC but don't add any music.
With iTunes closed, drag the iTunes folder out of Music on the new PC to the desktop.
Then with iTunes closed on both PCs you need to copy The iTunes folder from the old PC to the Music fodler on the new PC so that it replaces the one you dragged out.
It doesn't really matter how you achieve the copying - network or via an external drive.
The last thing you need to do is to check the permissions on the iTunes folder you copied to the new PC, your account needs full control.
Vista file folder permissions help
http://windowshelp.microsoft.com/Windows/en-US/Help/2464a180-e5dc-45d1-a2b8-3c8a 2b571e9d1033.mspx
http://www.mydigitallife.info/2007/05/25/how-to-take-ownership-and-grant-permiss ions-in-windows-vista/
for interest here is a description of how to transfer using an iPod to do the transfer:
http://support.apple.com/kb/HT1329?viewlocale=en_US

What is the most reliable way to run one Windows accounting program in Osx 10.5.8?

I have a simple Windows application where I basically do my accounts. I do not want to tie up my Imacs resources with running a full Windows Os "emulation" like Paralells or VMware Fusion just to run a simple accounting program.
I have heard about apps that can run one windows application at the time through a kind of Osx Application which emulates windows some how. Is is true that this is a better way of running my accounting program? Is it reliable? What I do is to punch in invoices and print out reports basically. How much resources does this "consume" to run it in "one simple application mode" in comparison with for example Paralells?
And what is the term for running windows in "one simple application mode"?

I guess you could try the free trial of CrossOver. http://www.codeweavers.com/products/crossover/ You did not say what app you want to run so it is difficult for us to recommend crossover as being able to run the app.
But your question is that you are looking for the "most reliable" way to run a Windows program. In my opinion you need Parallels or Fusion. These run the real Windows OS so my thinking is it is the "most reliable" method of running a Windows app on an Apple computer, other than Boot Camp.
But you said you don't want Parallels. This is probably why you have not received any responses. You eliminated the most reliable and easiest method, in my opinion, when you initially posted. Parallels does not consume any resources until you start it up to use your app. You can close it after you are done with your app. Of course hard drive space is required for storing the OS, your app, and data. But you still need to store your app and data regardless of method you choose.
One more thing, Parallels and Fusion create a virtual machine for running Windows.
So my recommendation, use Parallels or Fusion.

What's the sga max size for a 32bit windows server?

Hi,
I have a 32bit Windows Server with 16G of RAM... What is the SGA max size that I can setup?

Depending on your version of Windows and your version of Oracle there are methods to increase the usuable memory available to Oracle including the MS \3GB and \PAE switches and the AWE memory extention feature.
Oracle has notes on the subject:
Windows Memory Configuration: 32-bit and 64-bit 873752.1 plus notes 46053.1 and 46001.1
How to use Very Large Memory, higher than 4Gb on Windows 2003 32 bit #342080.1
HTH -- Mark D Powell --

What is the rule's of recover HP ENVY WINDOWS 8 notebook

Similar Messages

Maybe you are looking for