What is the runtime error compute_bcd_overflow.

Hi guys,
pls let me know that when the runtime error compute_bcd_overflow occurs.what will be the causes for this program.

You usually get that, if a number you calculate i getting bigger than the field it is stored in allows.
Take a look at your short dump, in the details it should give you more information and also the place in the coding where the error happens.
Hope that helps,
Michael

Similar Messages

  • ABAP runtime errors    COMPUTE_BCD_OVERFLOW

    ABAP runtime errors    COMPUTE_BCD_OVERFLOW
           Occurred on     12/08/2010 at 06:44:17
    >> Short dump has not been completely stored. It is too big.
    Error analysis
    An overflow has been determined in the current arithmetical operation
    containing operands of type P. Possible causes include:
    1.  The results field of type P is to small and the result does not fit
        into it.
        places.
    2.  The result or partial result has more than 31 decimal places.
    How to correct the error
    You may need to define the result field to be larger, if it is still
    possible to do so.
    It may be possible to split the current process so that only smaller
    values occur.
    Eine Vorablösung zu dem aufgetretenen Fehler findet sich vielleicht
    If the error occurred in one of your own programs or in an SAP program
    that you modified, try to correct it yourself.
    If you require an interim solution to this error, you can look in the
    SAP note system. If you have access to
    the SAP notes system yourself, enter the following search strings:
    "COMPUTE_BCD_OVERFLOW"
    "BCD_FIELD_OVERFLOW" (By release 4.0a, this error has been remedied at this
    point)

    Hi Ganapati,
    Check this thread COMPUTE_BCD_OVERFLOW in Database Performance collector.
    Note 543749 - ABAP runtime error COMPUTE_BCD_OVERFLOW
    It may helps you.

  • WCF OData Service stored procedure call generates "Operation could destabilize the runtime" error with $select option

    I've been trying to call a stored procedure through Entity Framework and WCF Data Services (OData). It returns an entity not a complex type. Following walkthroughs found all over the web, I came up with this code inside my service:
    [WebGet]
    public IQueryable<Entity> GetEntitiesByParameterId(int parameterId)
    return CurrentDataSource.GetEntitiesByParameterId(parameterId).AsQueryable();
    Calling the proc this way: ~WcfService.svc/GetEntitiesByParameterId?parameterId=1 executes
    the stored procedure and returns entities that should be returned. No problem there.
    Everything works well until I try to use $select OData option ie. ~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$select=name.
    Upon debugging, the method above runs without any error but it returns an Operation could destabilize the runtime error upon reaching the
    client. After so much research, apparently it is a very general error pointing to a lot of different causes. I haven't found one that really matches my particular problem. Closest are 
    http://stackoverflow.com/questions/378895/operation-could-destabilize-the-runtime
    https://social.msdn.microsoft.com/Forums/en-US/d2fb4767-dc09-4879-a62a-5b2ce96c4465/for-some-columns-entity-properties-executestorequery-failed-with-error-operation-could?forum=adodotnetdataservices 
    but none of the solutions worked on my end.
    Also, from the second article above:
    This is a known limitation of WCF DS. ...
    Second is that some of the queries won't work correctly because LINQ to EF needs little different LINQ expressions than LINQ to Objects in some cases. Which is the problem you're seeing.
    It has been posted on 2012. If it its true, are there still no updates on this? And is there any other workaround to get the $select working on the stored proc call?
    What works:
    ~WcfService.svc/GetEntitiesByParameterId?parameterId=1
    ~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$top=1
    ~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$skip-5
    ~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$filter={filter query}
    ~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$expand=SomeNavigationProperty
    What doesn't work:
    ~WcfService.svc/GetEntitiesByParameterId?parameterId=1&$select=name
    Tech details:
    EntityFramework 5, WCF Data Service 5.0, OData V3
    *I've also tried upgrading to EF6 and WCF 5.6.2 and it still didn't work.
    Any help would be appreciated. Thanks!

    Someone from SO replied to my question there and said that $select is still not supported though I couldn't find any definitive documentation about it.
    From what I gather and observed, $select breaks the stored procedure call because it tries to alter the data shape already gotten from the database and attempts to return a dynamic entity instead. Something about the stored proc returning an ObjectResult might
    be messing it up. As I have said, these are merely my observations.
    Workaround: I found a simple and elegant workaround for it though. Since my stored procedures are only getting data from the database and does
    not alter data in any way (INSERT, UPDATE, DELETE), I tried using table-valued functions that returns a table equivalent to the entity on my EF. I've found that calling this function on the Service Operation method returns an IQueryable<Entity> which
    is basically what is needed. $select also works now and so does other OData query options.
    Steps:
    Create a function on the database
    Update EDMX -> Add function
    Add new Function Import with Entity return type
    Create service operation in WCF Data Service that calls CurrentDataSource.<FunctionName>()
    Test in fiddler.
    CODES
    Database Function:
    CREATE FUNCTION GetEntities(@parameter)
    RETURN @entites TABLE(
    [Id] [int],
    [Name] [nvarchar](100),
    AS
    BEGIN
    INSERT INTO @entities
    SELECT [Id], [Name], ... FROM [EntityTable]
    RETURN
    END
    WCF:
    [WebGet]
    public IQueryable<Entity> GetEntity(int parameter)
    return CurrentDataSource.GetEntity(parameter);
    It doesn't really solve the stored procedure problem but I'm marking this as answer until someone can provide a better one as it does solve what I'm trying to do.
    Hope this helps others too. :)

  • Hollie**it! I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit.  I tried to update iTunes twice today.  This is what I get:     Runtime error!     Program: C:\Program Files (x86)\iTunes\iTunes.exe     R6034  An application has made an

    Hollie**it!
    I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit.  I tried to update iTunes Trice Now.  This is what I get: Runtime error!     Program: C:\Program Files (x86)\iTunes\iTunes.exe.   R6034  An application has made an

    Hello there, Vinnie.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do I find the "Preferences" file within Elements 10 to fix the runtime error?  I can't find it any where

    I am trying to fix the runtime error that occurs when I open the Photoshop Elements 10 editor and shuts down the program.  I am using the instructions found on the abode website here:
    http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
    There are no good instructions telling me what the Preferences file is named or how to find it. If someone could help that would be great.

    If you are using Windows 7 then the preference file that needs to be renamed is at this location:
    <C:\Users\USERNAME\AppData\Roaming\Adobe\Photoshop Elements\10.0\Editor>
    In the above path, replace USERNAME with your windows profile name  which could be something like jblogetc or whatever.  Also the preference file is called: Adobe Photoshop Elements 10 Prefs.psp and this needs to be renamed to Adobe Photoshop Elements 10 Prefs.old
    Once this done, restart PSE 10 and then see if it works.

  • What does the RunTime engine support?

    Hello,
    Does anyone know what functions the RunTime engine supports? Or is there a
    NI link I can follow. Some goodies like the VI server don't seem to be
    supported in RTE 5.1.
    6i any different?
    Thanks
    Martin

    I know about the paths, but I had problems with getting the username with
    the Open application reference, an error came up 'function not supported'
    and a pointer to the VI that caused it.
    It's my mistake to say the VI server was not included. But are the
    Application properties (web etc) included ?
    Thanks
    Martin
    "Dennis Knutson" wrote in message
    news:[email protected]..
    >
    > I use VI server with the run time engine all the time. When you build an
    app,
    > you have to specify which vi's are called dynamically so that they are
    included.
    > Paths parse out a little differently too when you've got a built app.
    Sometimes,
    > all it takes is an extra Strip Path.
    >
    > "Martin E" wrote:
    > >Hello,>>Does
    anyone know what functions the RunTime engine supports? Or
    > is there a>NI link I can follow. Some goodies like the VI server don't
    > seem to be>supported in RTE 5.1.>6i any different?>>>Thanks>Martin>>

  • How to delete the runtime error in st22

    Hi all,
            How to delete the runtime error in ST22. I want to clear
    the list of short dump in st22
    is there any T.code or any table to clear?
    thanks in advance
    sundar.c

    Hi
    you cannot delete the dumps through any tcode.
    All the dumps are stored in table called SNAP, If there are more dumps the table gets filled therefore u have to reorganize the table.
    Run the report RSSNAPDL in SE38.
    or
    You have the default SAP background jobs, SAP_REORG_ABAPDUMPS which deletes the past dumps raised in the system.
    Scheduling the jobs in regular is very important
    For more information
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7ede505211d189550000e829fbbd/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/d8/a58b4275160d53e10000000a155106/frameset.htm
    Regards
    Bhaskar

  • What does the "conversion error" I get when converting a pdf file to Microsoft word?

    What is the "conversion error" I get when converfting a pdf file to aMicrosoft word?

    Adobe reader with export to PDF
    Sent from my iPhone 5
    Marty Kennedy

  • What are the common error while EBS installation in Unix /windows

    what are the common error while EBS R12 installation with os unix and windows.
    oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
    regards

    Hi user;
    what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
    RW-5004- RW-50010 etc.
    For error we have to check instalaltion log files for can get more details about it
    oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
    1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
    2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
    For more details Please check:
    For r12.1.1:
    http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
    For r12:
    http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
    Hope it helps
    Regard
    Helios

  • Runtime Error COMPUTE_BCD_OVERFLOW in co02

    Hi guys.
    I am getting the runtime error Overflow during the arithmetical operation (type P) in program "SAPLCK21" when saving via co02.
    This error occurs in the Production system but not in the test system for the same Production Order.
    Thanks in advance.

    I have gone through the specified notes.They are not applicable to our system release 605.
    (For added information: we have recently upgraded SAP from 4.7 to ECC 6.0 EHP5)
    The issue is happening only for a specific raw material 159085420000.
    We have a test system QAS which is a copy of Production (live) system.
    In QAS, if this material is added to any production order, it is getting saved without any issues.
    But in PRD, it is causing the run time error when it is added to any Production Order.
    Also the MM master data for the material 159085420000 is exactly the same in both QAS and PRD.
    Also
    The Base Unit of measure for the material is kg.
    I am using the same unit. While saving (via co02), it throws the run time error from the form price_of_purchase_info_record.
    If I change the unit  to MT (alternative unit of measure) in co02, it is getting saved without any issues.
    Edited by: kapmsd on Jan 23, 2012 6:48 AM
    Edited by: kapmsd on Jan 24, 2012 6:29 AM

  • How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

    How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

    Hey Debbiered1,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so are particularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

  • What are the possible errors that can happen in data loads(rsmo monitor)?

    hi all,
    what could be the error that could result in red color in the RSMO  monitor of data load transaction?
    1. request everything ok
    (what are the possible error type which make here red)
    2. extraction everything ok
    (what are the possible error type which make here red)
    3. transfer (idocs and trfc) error occured?
    (what are the possible error type which make here red)
    4. processing
        - data package
    5. process chain
    (what are the possible error type which make here red)
    6 other messages.
    (what are the possible error type which make here red)
    thanks
    pooja

    Hi,
    I can tell you the most common reasons of these failures.
    1. request everything ok
    Here it will be telling you if the request was properly send to source system and got triggered there.
    2. extraction everything ok
    In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
    3. transfer (idocs and trfc) error occured?
    When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
    4. processing
    Processing in BW fails for each data packet is displayed here.
    This can also happen when you have sysfail in source.
    5. process chain
    This can show the logs of the chain here and also status of subsequent process.
    6 other messages.
    Any other error message.
    Refer
    What is the information we can get the through details tab in RSMO
    working with RSMO errors
    http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
    Also
    Data Load Errors
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    Data Load issues
    Errors in loading
    data loading errors
    load Errors
    Process Chain Errors
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Common Process chain errors
    process chain issues or errors
    Hope this helps.
    Thanks,
    JituK

  • What are the general errors will come in data uploading

    Hi Friends,
    What are the general errors will come in data uploading
    Thanks in Advance

    Paul
    It all depends on how we configure the system. Errors may be different for different scenerios like
    User ALEROMOTE Loacked for master data's
    Data Sourcs has to be replicated
    Activation Failures
    Error occures in data Selection Etc.
    Do you have any specific error so that we can work on that.
    Thanks
    Sat

  • What r the diff. error that can be solved using RSRV tcode?

    Hi ,
    what r the diff. error that can be solved using RSRV tcode?
    I want to know all the errors that can be solved using RSRV t code
    if any body is having good document regarding RSRV please send it to me at
    <u><b>[email protected]</b></u>
    Thanx in advance,
    ravi.

    Hi,
    Refer the below links for more details about RSRV TCODE.
    /community [original link is broken]
    http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
    it's for bw objects consistency analysis and repair.
    from transaction code RSRV doc itself :
    Transaction RSRV: BW Data and Metadata Test and Repair Environment.
    Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
    The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
    Starting the Transaction
    You can reach the test and repair environment
    By entering the transaction code RSRV
    From InfoObject maintenance (Transaction RSD1)
    By clicking on the "Analyze" button in the intial screen.
    After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
    The Initial Screen
    When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
    After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
    1. On the left-hand side, you can see a tree structure with the pool of available tests.
    2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
    Combined and Elementary Tests
    An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
    In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
    Combining a Test Package and Executing it.
    Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
    Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
    A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
    After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
    Test Results
    The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
    In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
    Repairs
    Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
    After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
    Test Packages
    The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
    Load packages
    Load for processing - the package is then locked against changes by others.
    Delete and
    Schedule execution at a later date or at regular intervals in background processing
    Settings
    In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
    Jobs Menu Option
    You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
    Application Log Menu Option
    You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
    New Selection Button
    The currently selected test package is deleted when you press this button.
    Filter Button
    After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
    Executing Test Packages in Process Chains
    You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
    The RSRV process log in the process chain is built as follows:
    First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
    A log view of the RSRV test package at the specified detail level follows.
    Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
    A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
    Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
    Hope This Helps,
    This is already there in SDN.
    Regards,
    rik

Maybe you are looking for