What is the safest/best way to clean/remove fingerprints from itouch screen?

I need a safe way to get fingerprints off my itouch screen. Thanks!
-M.J.

My 4G iPod did not come with a cleaning clooth. And the Apple site says:
In the box
iPod touch
Earphones
Dock Connector to USB Cable
Quick Start guide
I use a micro cleaning cloth like you use for eye glasses

Similar Messages

What is the most efficient way to use Remove Grain from After Effects on large Premiere Pro project?

I've tried to use Dynamic Linking both ways but it doesn't the effects don't appear no matter how dramatic I make them. Why couldn't there just be Remove Grain in Premiere Pro so I wouldn't have to go through the headache of figuring this out. I've tried importing the Premiere Pro project into After effects where everything comes up and, since there's so many files, it doesn't seam feasibly or convenient at all. Trying Dynamic Link vice versa didn't lend results either. What can I do??? Projects range from about a half hour to an hour and a half. Thank you.

The situations are well lit; it might be lack of knowledge on the camera settings itself.
Sort that and your workflow issue dissapears instantly.
There's nothing more efficient?
Yep...read above... but ...any Plugin. eg Neat Video... will take long processing time.
Fixing grain..actually "noise"...is always an image degrading process as well. It blurs!

HT1476 What is the absolute best way to recharge my iPhone 5S?

What is the absoulute best way to charge and discharge my iPhone 5S? Should I wait until the battery is below a certain percentage level before recharging?

Plug it in anytime you desire.
Charge it until you are ready to unplug it, then do so.
The only no-no is allowing the device to completely discharge.

What's the safest product/material to clean my iPad air screen with?

What's the safest product/material to clean my iPad air screen with?

Read through what Apple recommends: http://support.apple.com/kb/ht3226

What is the least expensive way for me to upgrade from CS version 8 and buy InDesign too?

What is the least expensive way for me to upgrade from CS version 8 and buy InDesign too?

Unfortuneately, a full Creative Cloud subscription at $40/month, or buy the CS6 versions outright.

What is the best way to clean a Macbook anti glare screen

What is the best way to clean my Macbook Pro anti glare screen

I have used WINDEX ELECTRONICS for about the past 6+ months:
http://www.windex.com/en-US/Products/Pages/electronic-cleaner-and-wipes.aspx
I apply it with a small damp microfiber cloth and wipe the excess off with a large microfiber cloth. The display looks the same when it came out of the box.
THIS IS NOT TO BE CONFUSED WITH ORDINARY WINDEX GLASS CLEANER.
Ciao.

What's the most efficient way to serve a file from a servlet?

I have a servlet that does various different things depending on the needs. Sometimes it dynamically generates content, and sometimes all it does is send a file out, with no alteration.
What is the most efficient way to just send a file?
One option:
OutputStream os = response.getOutputStream();
InputStream is = new FileInputStream(...)
(send all the bytes from is to os, the regular way using a buffer)Another option is to say:
RequestDispatcher rd = response.getRequestDispatcher(fileName);
rd.forward();Any other options? What's the prefered way of doing this?
I know the rule of "don't optimize too early" but this is a situation where we need to get the maximum amount of files served with the hardware we have, and it's going to be a lot of static files, so efficiency is important.
Thanks

Ok, that's what I thought. It would be nice if there were a "response.sendStream(InputStream input)" method in the ServletResponse class. Even nicer would be a sendFile or sendChannel or something. This is probably a common usage and it's a place where the container has many opportunities for optimization. For example, it could call the operating systems send_file kernel call so the entire transfer would be done directly from the disk controller to the ether card (on systems that support that).
For now I'll just do my own buffered copy.

TS3899 What is the current "best way" to use Outlook/Hotmail on the iPad?

I've learned through the recent Outlook/Hotmail problems that, on some devices, the best way to insure sync is to use Hotmail through the Outlook App.
What is the best way currently on the iPad?

I have had no problems with receiving or sending E-mails using Hotmail Account on iPad..
Settings>Mail, Contacts, Calendars> Add Account> Microsoft Hotmail
The iPad should automatically the POP3 and SMTP Settings for Hotmail.

What's the right/best way to publish from Captivate 7 for use in Presenter 9

Just upgraded to captivate 7 and have presenter 9. We are updating some old training courses created using Presenter with demos created in Captivate. I've gotten as far as upgrading the old .cp files to .cpx files and now am ready to publish the files within Captivate so I can import them into Presenter 9.
When I hit 'publish' in captivate there are options to publish as .swf and/or .html5. So I am trying to fugre out what will work best given what I'm trying to do. In presenter I don't see an option to import HTML5, only video files or .swf files, is that correct? in which case i need to publish as .SWF files? Is that the best way to do it in order to be able to import into Presenter 9?
If that's the case, and I need to have .SWF files, how do I choose which Flash Player version I want to use when I publish the files in Captivate? It's got the drop down box containing Flash 10, 10.2 and 11. My instinct would be to use the newest (flash 11). Is that correct? If not, why would I want to use a lower Flash version?
thank you!

Hi,
You can publish to either as .mp4 (Go to publish >Media >Mp4 ) or .swf from Captivate 7. In presenter 9 you do have an option to either import .swf or .mp4 files. See the image below to import these two formats in presenter:
Regards,
Mayank

Best Way To Clean iPhone Screen?

I've had my iPhone since the day it came out and, as such, it's been jostled a fair bit.
I use the cleaning cloth that came with it but sometimes there are spots that it can't get off.
I'm afraid of using anything wet on it, even a damp cloth.
Someone recommended alcohol-based solutions but I'm not sure.
What is the absolute best way to keep this thing clean?

Yup! That's what I was gonna say was rubbing alcohol. I just dabbed a cotton bud in a little bit of peroxide and wiped the screen; everything came right off. If you're concerned about damp stuff, you can squeeze out most of the liquid from the cotton bud first before rubbing it on the screen.
To be completely honest, though, in my case I do not have to deal with cleaniness that frequently. I've had my phone in a case with a plastic cover film on the face almost since the day I got it. I don't remember why I pulled it out of it's case for a little bit there, but I do remember it got dirty and this was a great way to shine it up!

What's the best way to clean the DVD player in a 2007 Macbook Pro?

Hello All.
Our older MacBook Pro from mid 2007 has not had its DVD Player cleaned.
Now our Redbook DVD'S are "skipping over damaged areas"
What's the best way to clean it?
Thanx for your advice.

take the files from the dvds and back them up as iso or just the files onto your computer. this way you wont have to rely on the optical drive.
the safest way is to take it into the apple store to clean,
but if there are danages on the DVD, you'll have to somewhere for them to buff it out. some gaming store will do this for you for a charge. You are better off taking the media off of the disks and saving them on your computer or usb stick, so on.
hope this helps ;-)

What is the safest way to perform a clean install of OS 10.6 over 10.5?

Model Identifier:
MacPro3,1
Processor Name:
Quad-Core Intel Xeon
Processor Speed:
2.8 GHz
Number Of Processors:
2
Total Number Of Cores:
8
L2 Cache (per processor):
12 MB
Memory:
2 GB
Bus Speed:
1.6 GHz
I installed the upgrade to OS 10.6 some months ago and have had problems ever since with slow speed on a lot of software, Adobe InDesign CS4 in particular. I would like to reinstall the OS clean and start over. What is the safest way to do this? Or does this not sound like it would be the culprit?

Use Carbon Copy Cloner AND Time Machine.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Create an OS X Lion Install disc
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

What is the best way to clean a white Apple keyboard?

What is the best way to clean a white Apple keyboard?

Take the batteries out if applicable, and use a very slightly damped lint-free cloth. Be very careful not to get any actual liquid into it. A brush would also be useful for cleaning between the keys: if you want to get fancy you can buy mini-vacuum cleaners for this, such as this one.

What is the best way to clean a soft screen on a laptop

what is the best way to clean a soft screen on a laptop

i dont know what you mean by "a soft screen", but read this: To clean the screen on your MacBook, MacBook Pro, or MacBook Air, first shut down the computer and unplug the power adapter. Dampen the included cleaning cloth with just water and wipe the screen. Do not spray liquid directly onto the screen.
http://support.apple.com/kb/HT3226#portables

What's the best way to cleanly stop Goldengate?

For routine maintenance/upgrades what's the best way to cleanly stop GoldenGate? I don't want to wait endlessly. I use this currently and seen no issues :-
stop er *!
kill er *!
stop manager!
Thanks,
Shankar

shiyer wrote:
For routine maintenance/upgrades what's the best way to cleanly stop GoldenGate? I don't want to wait endlessly. I use this currently and seen no issues :-
stop er *!
kill er *!
stop manager!
For routine maintenance/upgrades, just {noformat} "stop er *" {noformat} should be preferred; and when all processes are stopped, mgr can (optionally) be stopped. If you really are waiting endlessly for this to return, the real question is "why": then, perhaps there are other parameters that can be adjusted to make GG stop more quickly. (On the other hand, {noformat} "stop mgr!" {noformat} is harmless, the "!" simply prevents it from asking "are you sure?" before stopping the process.)
I really wouldn't use "kill" unless you really have a good reason to (and the reason itself requiring the process to be killed should be analyzed & resolved). To "kill" a process shouldn't cause data loss (GG always maintains checkpoints to prevent this) -- but still it seems unnecessary, unless there really is something that should be killed. (Aside: I mean, I can kill -9 / "force quit" my browser and/or 'halt' my laptop every time as well, and it would probably be "faster" to -- but it can cause issues (and wasted time) upon restart: i.e., fsck, recover sessions, whatever. Same basic idea, imo.)
There's a reason there are different commands to 'stop' processes (stop vs. stop! vs. kill). Just for example, "stop replicat !" causes current transactions to be rolled back; there typically is no reason for this, you'll just restart that txn when the process is restarted; might as well let the current one finish. And "kill extract" (I believe) will not warn about potentially "long running transactions" that can cause (painful) issues at startup (missing old archive logs, etc). There are probably other examples, as well.
So if this really is "routine", then "stop", don't "stop!" or "kill". If there are long delays, see why first & see if they can be addressed independently. (This really is just a stock answer for a generic question, it would be irresponsible for me to answer otherwise :-) )

What is the safest/best way to clean/remove fingerprints from itouch screen?

Similar Messages

Maybe you are looking for