What is the "Saved Gestures" option in iOS7 for iPad, and how does it work?

I can't find any guides or tutorials on it anywhere.

Not helpful at all, but I probably should have been more specific. I'm trying to figure out how to use the custom gestures. Do they do anything more than just trace specific shapes on the screen? For example, can you make a gesture that will open your photos or mail app without having to back out of the app you're in? Or to close the app you're in without using multitasking?

Similar Messages

  • What is "Assisted GPS" on the iPad and how does it work?

    What is "Assisted GPS" on the iPad and how does it work?

    I purchased the iPad mini Wi-Fi & Cell because it has GPS. OK, it is assisted GPS but the GPS works very well as stand alone. I got the iPad mini for use in flight, so I dont even have a sim card in it. The GPS works perfectly in flight under all conditions. I have cross checked it against typical approved aircraft installations and it is very accurate at all times. I use it in Wi-Fi mode on the ground when updating my aviation database, when planning a flight, or similar circumstances. The primary advantage of A-GPS is quick location reading when first turned on, when on the ground where the GPS satellites signal may be of reduced quality. At 10,000 feet plus, it is a stand alone GPS. I have frequently turned the iPad off in flight for periods of time and when powering up, it gave me accurate positioning in a few seconds, never exceeded 10 seconds. I have also tested my iPad on the ground, using the aviation maps, and the GPS works perfectly also.
    It remains possible that there is some feature that enhances the GPS when on the ground, even if there is no sim card in the iPad. But I doubt that any of these would work in an aircraft at high altutide. Nonetheless, I would appreciate knowing more about this.

  • Menu Object; MANUAL option. What is this, and how does it work?

    What is this... and, how does it work? Can't find documentation on this.

    My knee-jerk reaction is, "are f'n kidding me?"... but, of course, you're not.
    I must say, that is an incredibly useless option. How would that 'option" differ from simply making a text object (or text/rectangle/image combo or group) and creating a link?
    What got me looking at this option was the hope to find some way to insert a dynamic "field" that could be used on a master page to display the current page title (of a page based on that master). Something similar to Word (and other applications) that you can enter information into a document property and then insert that information anywhere within the document by using a field code for that info. I don't know if there is an HTML code that could be used to accomplish this, in this case. Something that would refer to the page title.
    Thanks for the info none-the-less.

  • What is the "Data Transfer Process" in the BI7.0, and how does it work?

    Hi, experts !
    I'm fresh on BI7.0.
    What is the "Data Transfer Process" in the BI7.0, and how does it work?
    And what is it used for ?
    Could anyone help me? Plz send me some doc.
    [email protected]
    Thank u !

    HI,
    Refer this blog
    /people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
    Also refer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
    Thanks

  • What is the use of control breaks in reoprts?  and how can we use them?

    hello all
    what is the use of control breaks in reoprts? and how can we use them in reports?

    use F1 on AT in a program.
    You get this
    Control break with extracts
    - AT NEW f.
    - AT END OF f.
    - AT FIRST.
    - AT LAST.
    - AT fg.
    Control break with internal tables
    - AT NEW f.
    - AT END OF f.
    - AT FIRST.
    - AT LAST.
    Each of these have a link to explain in detail what you are asking.

  • What's the difference between task list release for order and release for c

    What's the difference between task list release for order and release for cost?

    Pallavi,
    The status of the task list determines in which other application areas the respective task list may be used.
    Release for costing: means that the task list can be used to calculate costs in Transaction IA16 i.e. the costs for the task list operations would be calculated if released for costing status is set.
    Release for use in the order: Released for Order means that you can use the task list in an order i.e. you could include operations from a task list in an order.
    Regards,
    Usman

  • What's the best logic reverb to use for trumpets and sax

    what's the best logic reverb to use for trumpets and sax.

    The lower transmit frequency limit is in there to make the device meet FCC regulations.. that is a regulation imposed of US regions and, to a lesser extent, Latin american regions that border with the US.
    In addition, you'll be pleased to know that the N900 will not use certain European WiFi channels if a) the sim card is removed or b) the phone has a sim card but is OUT of 3G coverage.. again, to make the device meet FCC regulations.. (seriously.. when you go out of 3G coverage, the kernel reports it is switching from EU wifi to US wifi!!)
    Let me put this into perspective..
    From: http://www.nokia.com/results/Nokia_results2009Q3e.pdf
    Nokia sold 3.1million handsets in the US 2009 Q3
    Nokia sold 27.1million handsets in Europe during the same period.. That is 9 times as many.
    The USA has its OWN firmware
    and yet ALL versions of the firmware (including the UK specific one) are crippled to meet the requirements of a region that produces the lowest sales figures by a factor of 3 (Latin America produced 9.7 million units in 2009Q3)
    Why the HELL are we suffering because of US restrictions..
    That's like saying you can't use bluetooth because it isn't allowed on the Christmas islands.. (it is allowed.. not picking on you, Christmas Islands, but you are small!)
    If the FCC wants a phone that doesn't allow broadcasts on sub 88Mhz frequences, and doesn't want certain Wifi channels to be used, the ALTER THE US FIRMWARE..
    What next, BMWs have with left hand steering in the UK because the US drives on the Left?
    Phillips TVs that only work on 120V because the US uses 120V..
    I don't give a **** what the FCC say.. I'm not in the US and I have my own european and UK legislation to adhere to..
    For a company that INSISTS on having a billion regional firmware versions, they don't appear to be able to get that right either!!! The UK version lacks UK specific restrictions such as the ability to us UK frequencies for wifi and FM transmission!!
    Crazy and very very irritating

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • What is iTunes Match and how does it work?

    What is iTunes Match and how does it work? I have several tunes on my computer that do not show complete. The source of these tunes are from my own CDs.

    iTunes match - http://www.apple.com/itunes/itunes-match/ - see FAQ at end too
    Basically it looks at the music you have in iTunes.  If it sees the equivalent on the iTunes Store site it does nothing, but it makes that copy accessible to you to download.  If you have music  it doesn't it will upload a version from your computer to the site that only you can access from anywhere online.
    In your case if you have incomplete tracks it will not fix them.  It does some kind of audio fingerprinting to make sure you aren't just feeding it a bunch of 60s demonstration cuts and trying to get whole tracks back.

  • I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work

    I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.

    Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files.   Some programs are also Versions aware, which offers a kind of restore capability by file.  Again needs to be setup before you start editing.
    Just a for-your-info:
    Mac is not an acronym, it is a nickname for Macintosh.

  • I just bought a WD external HD but it is formated for windows. It says the drive has to be reformatted for Mac. How does one do that?

    I just bought a WD external HD but it is formated for windows. It says the drive has to be reformatted for Mac. How does one do that?

    shldrtothewheel
    http://lmgtfy.com/?q=youre+awesome+

  • I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

    I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • The special offer for the printer that is going on with a Mac, how does that work? Is it true i can get a free printer?

    The special offer for the printer that is going on with a Mac, how does that work? Is it true i can get a free printer?

    you pay for it up front, and they give you a rebate or $99, so if you buy a $99 printer from them (Epson Stylus NX430 Small-in-One Color Inkjet Printer $99.95) then the printer becomes free. You can not get this deal unless you also buy a mac with it.

  • I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

    I tried to update my photo albums in my Iphone 4S. I could not, and the old photos were removed. I tried again to copy the albums in the Iphone from a PC Windows XP folder and it does not work.

    You can't activate any GSM iPhone without a valid sim card installed in the phone.
    So, yes, you need to get a sim card.

  • Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently.  I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

    Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently.  I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

    For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed.  In that case, if there is a problem with comcast, the message send should just fail.
    Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
    You might find the comcast forums useful for getting the settings right - I found this:
    http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
    The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

Maybe you are looking for