What is the screen for 'AETC / Allowances and Charges' DFF ?

Hi All,
I need to know in which screen/form is the DFF "AETC / Allowances and Charges" (Application : Order Management) located ?
Thanks in Advance!

Aloha, Lorna, me, the Kraut again...
the resolution of a movie project is independent of its content, or where the pictures/clips/videos come from…
iM is meant by concept to deliver to TV, by tape or DVD…
so limits are set by your video standard, which is NTSC, which has 720x480 pixels.
have a look at Dan's phantastic website:
http://danslagle.com/mac/iMovie/video/2002.shtml
http://danslagle.com/mac/iMovie/video/2003.shtml
… as far as I understand, that answers Q2 too, right...? all screens same size…
and, search at amazon.com (or at your local library/bookstore) for
David Pogue/The Missing Manual....
zillions of tipps&hints&easy to read how-tos

Similar Messages

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time.

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

i would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

There are no upgrades for student editions. You simply buy a fresh license at the discounted price.
Mylenium

What is the process for rollout projects and upgradation projects

Hi All,
Hope you all are doing well.
I am a new bee in oracle apps. Just would like to understand what is the process for rollout projects and upgradation projects and difference between them.
Please help me. Thanks in advance.
Regards,
MM

Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
Where Technology Meets Talent

What is the use for lock object and how to use the lock objects

Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .

hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

What Is The Criteria For Reloading objects and JSP Pages?

I have a JSP application that consists of many HTML, JSP & JavaBean files.
          Since I am in the middle of the development phase I am making lots of
          modifications to the code. I've noticed that much of the time if I recompile
          a JavaBean into a class file WebLogic does not reload the updated class.
          In my weblogic.properties file my servlet reload property is:
          C:/weblogic/myserver/servletclasses
          All my JavaBean class files reside in a sub-directory of that directory. For
          example:
          C:/weblogic/myserver/servletclasses/org/hhmi/award/JavaBean1.class
          How come these beans don't get reloaded each time? Is there a different
          WebLogic property I should use? What is the criteria for re-loading a class
          file anyway?
          Thanks in advance,
          Matt


BTW, I tried this in 6.1 and it does reload modified classes in
          WEB-INF/classes, but, sure enough, it results in ClassCastException's etc, for
          example:
          <%
          Foo foo = (Foo)session.getAttribute("foo");
          session.setAttibute("foo", new Foo());
          %>
          will result in ClassCastException if Foo was modified.
          So, if 6.1 tracks class modifications, then why doen't it trigger application
          redeployment? It can definitely be more convinient than touching 'REDEPLOY'
          file.
          Mike Reiche <[email protected]> wrote:
          > Make sure that your servletclasses and your jsp workingDir are NOT in your weblogic.class.path.
          > Pay attention to what Dimitri said.
          > Set your reloadCheckSecs=0 (check every time).
          > Set your pageCheckSeconds=0
          > Mike
          > "Matt Connors" <[email protected]> wrote:
          >>I have a JSP application that consists of many HTML, JSP & JavaBean files.
          >>Since I am in the middle of the development phase I am making lots of
          >>modifications to the code. I've noticed that much of the time if I recompile
          >>a JavaBean into a class file WebLogic does not reload the updated class.
          >>
          >>In my weblogic.properties file my servlet reload property is:
          >>
          >> C:/weblogic/myserver/servletclasses
          >>
          >>All my JavaBean class files reside in a sub-directory of that directory.
          >>For
          >>example:
          >> C:/weblogic/myserver/servletclasses/org/hhmi/award/JavaBean1.class
          >>
          >>How come these beans don't get reloaded each time? Is there a different
          >>WebLogic property I should use? What is the criteria for re-loading a
          >>class
          >>file anyway?
          >>
          >>Thanks in advance,
          >>Matt
          >>
          >>
          Dimitri

What are the uses for Macbook pro and Macbook air?

Hi! I am deciding between MBA and MBP and need to know what the different uses for each one was. Like what would you use the MBA for and what would you use the MBP for?? All opinions welcome!!

They're actually pretty comparible in what they can do if you're talking about the base model of both (say 13") with 4GB RAM. At that level, the Pro has the advantage if you're going to watch or burn DVD's or CD's, as the Air has no optical drive. But otherwise, they're pretty much the same--full-sized, backlit keyboard, camera, beautiful screen, etc. If you're going for more than a basic 13" Pro, then things start to change. For example, you can get up to 8GB RAM on the Pro, and a huge hard drive, you can also get a 15" or 17" size. You will be paying a lot for these, but, obviously, if you're going to be working on, say, making videos (which you may then want burn onto disk) the Pro is very much what you'll want.
However, if you don't need or want any of that--if, for example, you plan to do the usual programs (word processing, games, web surfing, music, etc.), then you really won't see much difference between the two. At 4GB RAM and a 13" screen, the big difference is going to be thickness and weight, not power. And in this the Air will have the advantage--it's really amazingly slim, light and with a SSD, faster (you pay extra--a lot extra--to get SSD on the Pro).
Just to make the point, I switched from a 13" Pro to an 11" Air. My hard drive size is half what it was with a Pro, but I was barely taking up half of that amount on the Pro, and so have plenty of room on my 128GB Air (you can get 256GB for the 11" if you order it online). Absolutely everything my Pro did, my Air does (sans optical drive), only faster and lighter and more compact--meaning it takes up less table space, slips in and out of my bag faster, balances on my lap easier, etc. But there was no interruption of service--I switched pretyt seamlessly from 13" Pro to 11" Air.
The Pro offers you more options for power, screen size, HD size and optical drive. But it's really pretty surprising how few of us need that much power, that much room, or the optical drive. It's very freeing to realize that less can be more than enough.

What are the coupons for?? and where can I get cheaper .Mac membership

What are those coupons that came with the mechine for??
Not for .Mac??
where can I get cheaper ones.(I live in Canada)
Thanks

They are used for the rare promotion or upgrade offers.
The only time I've ever seen a use for them is when you purchase a computer with a previous version of the Mac OS when a newer version is already available.
You can submit one of the coupons with the upgrade form to obtain the new version at a reduced price.
That's about the only benefit I've ever seen for them.
Apple calls this program something like "Mac OS Up To Date" (something along those lines).
To illustrate, say you purchased an iMac right after OS 10.4 came out, and discovered that the iMac was packaged-up prior to OS 10.4 being available (like it sat on a shelf for a while). So, you've got OS 10.3 installed on it.
Now, you purchased a new computer, obviously you want the latest OS to go with it.
So, because you purchased a new machine with an old OS, you can use the OS Up To Date program to order upgrade disks to OS 10.4 for only $20 or $30 instead of the $129 everyone else pays.
It's not really a fair deal for a person who just purchased a new computer. But, it's better than getting stuck with paying $129.
So, you would fill out the upgrade form, and submit your coupon with it.
The same thing applies to if you purchased the system after the new version of iLife was available. You might be able to get the new version of iLife at a reduced price.
Apple usually runs this program for about 90 days after a new software version is available.
They used to work it the other way:
When I purchased my PowerMac G3 266-DT, they had a program that allowed you to upgrade to the new version of the Mac OS for $19 or $29 (can't remember for sure the $ amount) if it was released within 90 days of you purchasing your computer.
I took advantage of that, and got a reduced-price upgrade to OS 8.5 from OS 8.1.
That method makes more sense to me than the current method.
It makes sense to get a reduced price on updates that arrive up to 90-days from your date of purchase.
But, it is not such a good deal to have to pay for updates that were already available at the time of purchase and should have been included with your new computer. After-all, it's not your fault that the computer sat on the shelf too long.
But, that's how it works now. The coupons basically get you a discount on software updates that were shipping on new systems when you purchased your new computer that had been boxed-up before the new software was released.
As for cheaper .Mac prices, the only options I know of are:
1) You get a $30 discount on it when you purchase a new Mac. So, when you setup the Mac, you are usually presented with an option to sign-up for .Mac with a discount.
2) Amazon sometimes runs a special on it.
3) You might be able to get a .Mac retail box from someone who purchased it and then changed their mind. But, don't buy a box that has been registered already.
Be very careful buying products like .Mac second-hand. There is no way to know that they have not already used the registration code until after you receive it and try to register it yourself.
Hope this helps to answer your question.

What are the settings for iPhone, iPad and iMac to sync ical and contacts?

How can I get all three items to sync? What are the settings on the iMac with Lion on board? I put all my stuff on iphone but iMac & iPad do not have the items synced even though I have everything on icloud?

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

What is the tcode for bdc recording and how to do in hr-abap for pa and om

hi,
I need to do the bdc recording for pa and om. So, can any of you tell me how to do and what are the tcodes we have to use.
thanks & regards,
Sekhar.

Hi ,
Here is the link from you will get all the transaction code
http://www.sap-basis-abap.com/saphr004.htm
As far PA specfic some tcodes are given below
PA20 Display HR Master Data
PA30 Maintain HR Master Data
PA40 Personnel Actions
PA41 Correct Actions
PA42 Fast Entry for Actions
PA46 Import from Resumix
PA47 Export to Resumix
PA48 Hiring from non-SAP system
PA51 Display Time Data
PA53 Display Time Data
PA61 Maintain Time Data
PA62 List Entry of Additional Data
PA63 Maintain Time Data
PA64 Calendar Entry
PA70 Fast Entry
PA71 Fast Entry of Time Data
PA88 Benefits
For OM specific
PP01 Maintain Plan Data (menu-guided)

TS3048 Tiny green light continues to blink and no connection is ever made on the screen for both Keyboard and Mouse

After doing the steps http://support.apple.com/kb/TS3048#1 both keyboard and mouse tiny green light continues to blink and no connection is ever made on the screen. What could the problem be? Items are only 4 months old.

Hello:
Try resetting the PRAM and SMC. You will need a KB to reset the PRAM, but the SMC may be reset without any peripherals.
Barry

What is the table for inbound delivery and PO

Hello,
I did one inbound delivery with reference to PO, the SD Documnet Category:7(Shipping Notification/Delivery)
I tried in LIKP,EKBE tables for Inbound delivery and PO relation.
I didnot find, Can i have the table name for findinh the PO and Inbound delivery in one table.
I want to fetch these two documents in to reports.
With regards
Lakki

I am sorry. I misunderstood your requirement. Please ignore my earlier post on this.
But do consider the below option :
You can get both Purchase Order as well as Inbound Delivery details in LIPS.
LIPS-VGBEL = Reference Document ( In this case it would be PO )
Hope this time it helps you.

What is the pricing for Illustrator CS6 and CS5 for creative cloud and also outright purchase

I'm wanting to purchase Illustrator CS6 or prior versions either through creative cloud or outright purchase. I haven't been able to find prices other than for Illustrator CC.
Thanks for your help!

Okay thanks. It wouldn't make sense since it costs the same per month for CC though, right?
Also, could you tell me why it is that when I click the below link (free CC trial) it launches nothing but the screen below.
https://creative.adobe.com/products/download/illustrator

What's the need for capitalization date and 1st acq. posting date?

hi guys,
i was wondering what the system would do with capitalization date and first acquisition posting date ??
and what will be the problem if i entered an asset value date (in the acquisition transaction) that's earlier than the capitalization date entered in the asset master record ?!

In practice all assets are not put to use right from the date of purchase.Hence the concept of different dates arises. One being the acquisition date and the other Capitalization date.
I would buy an asset today but start using it from a later date. Depreciation has to be calculated from the date of capitalization and not acquisition. But still for record purpose date of purchase would be important. Hence both the dates are maintained.
Hope this has clarified your doubts.
Thanks
GU

What is the screen for 'AETC / Allowances and Charges' DFF ?

Similar Messages

Maybe you are looking for