What is the "search folders" tab for and how to set it up?

Since my scratch disk is on my external HD and my project files will be on my system drive I am wondering what location I should set the search tabs folders at.
If anyone knows what this a tab does exactly I would like to know. I am under the impression that when the software starts up it looks in the folder that is specified under this tab to load the project.

Search is only if it needs to find the media for a reconnect. It's not necessary to load the project. Regardless you should assign the media drive.

Similar Messages

What are the uses of MVC, Extension and how to create it for begineers pls

what are the uses of MVC, Extension and how to create it for begineers pls
dont give link for tutorials please explain ,
thank you,
Regards,
Jagrut BahratKumar Shukla

Hi,
Check out this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm</a>
It is the best possible explanation and documentation that you'll get.
Thanks,
Tatvagna.

I am trying to listen BBC radio news from BBC App, but on pressing the button I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

I am trying to listen BBC radio news from BBC App, but on pressing the button "live radio" I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

That is probably just a generic error message and you might not ever know what is causing it. Assuming that you have been able to play live radio with the app in the past (I know nothing about the app) and assuming that all other Internet related functions (Safari, email, etc.) are working properly on your iPad, quit the app completely and reboot your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails to resolve the issue, you might want to reboot your router, unplug it for about 30 seconds and then plug it in again.

What is the 'other' on my iphone and how do I delete it?

What is the 'other' on my iphone and how do I delete it?

Solution
My "other" partition was up to 25G !!!! on my iphone 4S and I didn't want to restore my phone as I would loose important SMS and info on it and re-arrnage 1000 apps again.
I found this link and followed the steps
http://www.ipodrepublic.com/iphone/fixing-issue-other-files-iphone-memory/2010/0 3/31/#comment-47142
Using that program suggested was free too. I used it straight away after downloading it. I removed my files in
"media Folder". These 3 folders was where I found the solution.
- Music - all the "F" files
- ApplicationArchives - all the big stuff
- Recordings - all currupt M4a in there
Vola! My phone now has 25GB back!!!!! Other is just 26 killo bytes! yes Killo bytes!
Hope that helps
Cheers

What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? And how to solve it ？Please give your answer. Thanks
Attachments:
QQ截图20140403134626.png ‏59 KB

duplicate post
LabVIEW Champion . Do more with less code and in less time .

I have been trying to download and install a trial. What is the best browser to use and how do i do it?

I have been trying to download and install a trial. What is the best browser to use and how do i do it? The set up and everything is on the desktop but it never seems to load anything?

what file (name and extension) is on your desktop and what os?
what have you done to install the desktop file and what do you see when you do that?

What is the activity quantity in KSII and how is it arrived

Hi,
Could any body help me to understand what is the activity quantity in KSII. How will we arrive at the figure we get when we run KSII.
I know the that we would be giving theplanned cost in KP06, planned activity quantity in KP26 and then when we run the price calculation in KSPI we get the total price for the cost center and the activity type. This is what is the planned total price for a period.
I am unable to understand the differece between the planned and the standard cost. Please help me with an example.
Standard cost is planned cost * actual hours, correct me if I am wrong.
Please assist,
Regards,
Shilpa.

Hi Shipla ,
You have two questions :-
1. How to get activity quantity in KSII
KSII is actual price calculation . Actual Price = Actual Cost/ Actual Qty..
Actual quantty is derived from quantity confirmed in production/process order and direct activity allocation done to the cost center . If you see a Cost Center Plan/Actual variance report.. you can see the actual quantity booked in a process Order . Actual Cost is the cost booked into the cost centers ..from FI/CO /IO settlement etc ..
During Actual costing , activity costs are generally booked at plan rate ( KP26). In KSII , actual price is computed and the difference is allocated to the cost centers.
2. Standard cost is planned cost * actual hours
No , plan cost is the cost you have planned for the year . You can use the plan cost to create a cost estimate . This cost estimate can be used as standard cost or for any anaylsis purpose..
Always remeber that purpose of product cost planning is to compute product cost estimate . This estimate may be used as standard costs.
Hope it clarifies..
Regards
Sarada

I'm traveling to Europe for several weeks. What's the best converter to use and how will this effect my computer?

I"m traveling to Europe for several weeks. What's the best converter and how will this effect my computer over time?

Right! Our regular power bricks cover the gamut of 100-240 VAC, 50-60 Hz that will take care of everything save, say, a failing portable generator chugging in the tip of the Alps...
And you can drink the Apple koolaid and purchase the Official $40 Apple Adapter Kit ( http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ ) that will look chic and color matched to your brick, or do as Kappy says and get a regular equivalent from the nearest Radio Shack

What is the "Other" category under storage and how can i delete items from this?

My disc is almost full. "About this Mac" says that I have 47 GB of "Other." What is this Other and how can I delete items from this?

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

What is the use vss in java and how to use it?

can i know what is vss in java and how to use it and also can you tell me related vss like svs?
and what are tools for configuration in real we will use?
am i student i want to know these all?

jduprez wrote:
You do not need to know them all, but one for sure, since it is a must for multi-developer team.8o( ?????
It is a must. Period.
OK, let's tone down: it is a must for any job related to software production. Not only development.That begsl the question, What does it mean to "know" one of these systems? I would expect Product Management, Documentation, QA, and Support staff to be conversant with the fundamentals of such a tool--check in, check out, version/revision numbers--but not much more than that. Developers, on the other hand, I would generally expect "know" the system with a much higher level of expertise--query language, branching, merging, and so on.

What is the little blue bell icon and HOW do I get rid of it?

Hi all,
I keep getting a little blue bell icon with 2 red curved lines up at the top right corner of my screen. I do not have any alarms or alerts set. What is this and how do I get rid of it? (permanently would be nice). Thanks in advance for any wisdom y'all can impart.

Actually neither of the above (I had said I have no alarm set).
Turns out it is the symbol for voicemail calls I didn't receive (thank you from someone else who also has the same problem with their Pearl). To get rid of it one must go into the voicemail area and manually delete those calls.

Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！
——1110340026
Attachments:
QQ图片20140403140655.jpg ‏108 KB

Sannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time .

What is the use of ST05 ? and how to use " ST05 "

can anybody tell me what is the use of " ST05 "
and how can we handle it.

SQL Trace
SQL trace(ST05) provides the developer with the ability to analyse database select statements. Simply execute ST05
to turn on SQL trace, then execute the statement/program you want to analyse. Now turn off SQL trace using ST05
and click on list trace to view the details.
You can also perform traces on other items such as authorisation objects.
Authorisation trace analysis 1. Open two sessions
2. Execute transaction ST01 in one of the sessions
3. Select the authorisation checkbox, note the other traces
you can perform (SQL, RFC, Table Buffer etc)
4. Click the 'Trace On' button
5. Within your other session execte the transaction/report
you want to trace or get the user in question to do it
6. Return to the session where you turned the trace on and
click on 'Trace Off' otherwise it will continue to record
all athorisation checks
7. Click on the 'Analysis' button
8. Enter appropriate data into selection screen such as
Username, type of trace records (i.e. Authorization check)
9. Click on the Execute button.
10. Report displaying trace results will now be displayed
http://www.sapdevelopment.co.uk/perform/perform_sqltrace.htm
Some useful transaction related to this are ..
ST01 SAP system trace
ST02 Buffer statistics.
ST03 Workload analysis.
ST04 Database performance analysis.
ST05 SQL trace .
ST06 Operating system monitor ...
From the recorded SQL trace you can deduce:
· Which SQL statements your application carries out
· Which values the system uses for specific database accesses and changes
· How the system translates ABAP OPEN SQL commands (such as
SELECT) into standard SQL commands
· Where your application positions COMMIT statements
· Where your application makes repeated database accesses
· What database accesses or changes occur in the update section of your
application
Look at the below links, you will get the idea
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801f89454211d189710000e8322d00/content.htm
http://www.sapbrain.com/TOOLS/SQLTRACE/SQL_TRACE.html
Check the following links:
http://www.sapbrainsonline.com/TOOLS/RUNTIMEanalysis/SAP_runtime_analysis.html
http://www.sapbrainsonline.com/TOOLS/SQLTRACE/SQL_TRACE.html
Use
The Performance Trace allows you to record database access, locking activities, and remote calls of reports and transactions in a trace file and to display the performance log as a list. It also provides extensive support for analyzing individual trace records.
SQL Trace: This allows you to monitor the database access of reports and transactions.
Enqueue Trace: This allows you to monitor the locking system.
RFC Trace: This provides information about Remote Function Calls between instances.
While the trace is switched on, the SQL Trace function records all database activity by a particular user or group of users. The R/3 System takes OPEN SQL statements and converts them in to embedded SQL statements that it passes to the database. It is the embedded SQL statements, their parameters, return codes, and the number of entries retrieved, inserted, or deleted that are recorded in the SQL Trace file. The log file also contains the runtime of the statement and the place in the application program from which it was called.
The SQL trace tells you:
The SQL statements executed by your program.
The values that the system uses for particular database access and changes.
How the system converts ABAP Open SQL statements (such as SELECT) into Standard SQL statements.
Where your application executes COMMITs.
Where your application repeats the same database access.
The database accesses and changes that occur in the update part of your application.
Refer
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/cb632772cd0cd4e10000000a1553f7/frameset.htm
Regards
Vasu

HT1338 what is the latest version of Safari and how do I obtain it?

Yahoo is stating I need to upgrade to the latest version of Safari. I have a MAC desktop. How do I find the lastest version of Safari and download it?

Safari 7.0 is the current version. It is bundled in with Mavericks, which you are hopefully running since you posted in the Mavericks community.

How to get the values from table region and how to set

Hi,
I have a requirement as Seeded Page Having One Table Region having around 8 columns, In That Item Description field is there. My Requirement is I need add one more field for that Region and assign the value depending Item Description.
I will create one new Item in that region and will give name as Item, But how to set the values to Item Depending on Item Description.
Is it possible to through CO Extension, If yes..Pls help how to get it.
Thanks in Advance,
Hanimi

Hi Hanimi,
1. You need to extend the VO, add a new Attribute.
2. In VORowImpl of the extended VO, you can find the getter for your new attribute (example getItem())
3. In this getter method you can write some code like:
if("ABC".equals(getItemDescription())
return "XYZ" ;
-Prince
http://princekapoor82.blogspot.com

What is the "search folders" tab for and how to set it up?

Similar Messages

Maybe you are looking for