What is the setting for Siri to give audible turn by turn directions?
Have figured out how to get turn by turn directions but they are not audible. Keep missing turns while trying to read on phone. Not the safest way to drive.
I didn't think Siri could give turn by turn directions. For that you need a dedicated app that provides this feature.
Similar Messages
-
i need that all the tabs to be save while i close the firefox. the while open all should restore
One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for '''browser.warnOnQuit''' and '''browser.warnOnRestart''' -
What are the setting for Save button for saving plan data in WAD template
Hi,
i created SAVE button in Webtemplate for saving plan data.But this button is not
active.is there any setting for this?
thanks in advance
chanduHi Chandu,
The settings to Configure the Save function.
Right click the Button Group Item ® Properties ® * Button ®
Type Caption Save ® Command ® Select All Commands Tab ®
De-select Execute Planning Function and then select checkbox Save
Changed Data ® Double click on Save Changed Data ® OK ® OK ® Save your template.
*pls assign points,if info is useful*
Regards
CSM Reddy -
How can i get my phone to read my text what is the setting for that
im trying to figure out the setting where u can turn on when a text comes in I want it read to me my friend has a speak button
settings>general>accessibility
-
I recently bought an Airport Extreme and a HP P1102W printer. The printer can not find the Airport Extreme network, even after turning off the network security. Is there a setting that needs to change so the printer will see the network? I am using a MacBook Pro.
I only have an iPad. I consulted HP Product Support and they told me to activate WPS on my E1200 router. The printer then connected to the router and obtained an IPv4 address. But it changed the netwrok name and disconnected my iPad. Initially my network had a default name Ciscoxxxxx but now it created a new network Cisco_WPS_nnnn. I tried to join this network but it was asking me for a 8-character password that I don't know. Linksys support asked me to upgrade to EA4500 router. But since i have Apple TV, iPad and iPhone, I thought I would buy an Apple router instead. But before I jump in this direction, I want to make sure that it will work for me. I know I can return this product but I don't want to turn this into a major project. Thanks.
-
PrCS5.5: what are the setting to produce a Blu-Ray disk with Encore CS5
what are the setting for a sequence, media encoder, & Encore to produce a Blue-Ray disk.
At present , I have tried several different combinations, but Encore just hingessorry i forgot the link...
http://www.precomposed.com/tutorials/04_bluray_subtitles/
at the end of tutorial , you find instructions for create a right iso image.
Another thing. If you go to create a DVD Dual layer, Imgburn offers a excelent tool to set layer break. I prefer this option,and not Encore automatic option.
You can check other tutorial
How to write a Blu-ray Video disc using ImgBurn
http://forum.imgburn.com/index.php?s=a3f19e39fa1a21b69df15414dc8b7a90&showtopic=9512 -
I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!
Cc2528 wrote:
The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
but I would be more inclined to to the factory reset and start afresh. -
What is the need for setting property data inside the JMSMesage
Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties. -
After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr
Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio -
What is the default for the "Display PDF in Browser" setting?
What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
Also, are any statistics available on what proportion of users have this setting set to on?For all three the default is "checked".
Be well... -
What is the BAPI for setting "deletion flag" in IW32?
What is the BAPI for setting "deletion flag" in IW32? Thanks!
Hello
There seems to be no BAPI to set deletion flag for MO.
Quick Approach:
You can copy an existing BAPI module BAPI_ISUSMORDER_SETSTATUSTECHN, for example, to Y_BAPI_MORDER_SETSTATUSDEL, and then edit this copy
change the code in the existing lines for screen 3000
PERFORM BDC_DYNPRO USING 'SAPLCOIH' '3000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' 'LVMS'. (Instead of current 'ARCH')
It should hopefully work.
fyi: The orders can be set with Del flag only when they are in CLSD status
Rgds
Kartik -
Re: (forte-users) Ok, what's the "secret" for setting serverside envi
Dear Robinson,
It seems to be that you have 2 ways of solving the problem:
1) restart forte after setting the environment variables
2) write a little application which sets the required variables, using
the task.part.OperatingSystem.SetEnv(name,value) method.
If you have to chage the variables rarely, then it`s easier to restart forte,
otherwise I would suggest to use the SetEnv function...
Best Regards,
Tamas Deak
"Robinson, Richard" wrote:
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
Tamas Deak
Lufthansa Systems Hungary
(forte developer)
2-6 Mazsa ter, Budapest, 1107, HUNGARY
(36-1) 4312 973
[email protected]
[email protected][email protected]-Richard,
There is no way of changing the environment variable once the Node
Manager is up. You will have to shutdown the node manager and then restart
it to have the new environment variables take effect. Sorry, there is no
secret way of doing this that I know of.
But you can set the variables on you development machine and run you
application without distributing. This way the partition will be running in
your client machine and not the server.
Another way we have also got around this is by having a special
environment variable on the client side that opens a admin screen when you
run you application. This admin screen will allow you to change the
environment variables and then set them on the server partition. You will
have to do come coding on the server to make this happen but if you are
using a framework then it should be easy. We call this developer reconnect
facility. It only can be activated by the special client side environment
variable. I comes in very handy when we are development and want to change
the database on the server partition.
Hope this help.
ka
Kamran Amin
Framework, Inc.
303 South Broadway
Tarrytown, NY 10591
(914) 631-2322x121
[email protected]
http://www.frameworkinc.com/
-----Original Message-----
From: Robinson, Richard [mailto:[email protected]]
Sent: Thursday, November 04, 1999 7:23 AM
To: [email protected]
Subject: (forte-users) Ok, what's the "secret" for setting server side
environment varia bles when running in the Forte Development
Environment?
Subject says it all.
We have a bunch of environment variables that are used by the server side
objects. What I want to do is change the value of some of the variables
prior to running my application in Forte Development IDE (3.0.G.2). I've
tried to set the environment variables via NT's registry, but it appears
that at execution time the variables take on the value of whatever they are
for the node manager.
Most IDE's I've worked with before have a way to specify environment
variables right in the tool. Forte doesn't appear to have that capability -
say it ain't so!
Any clues?
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected] -
hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
What is the Process for setting up smart view
what is the Process for setting up smart view
hehehe ..... cant stop it :)
@next level ::try this
Re: Smart View configuration
apart from this try giving point the people who post answers to u .. :) so that they will reply ur post or question which u ask now days non stop...try to minimize ur qs in single post it would be better -
What is the Procedure for Creating BC sets In PI
hi
what is the Procedure for Creating BC sets In PI
ThanksHi Venkata,
Read this SAP official document on creating BC Sets:
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/6f/3c3f91fbef11d2958c00a0c930dcc1/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/6f/3c3f91fbef11d2958c00a0c930dcc1/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/6f/3c3f88fbef11d2958c00a0c930dcc1/frameset.htm">Create Business Configuration Sets</a>
Regards,
Subhasha Ranjan
Maybe you are looking for
-
Backing-up my playlists, top-rated, & favorites onto an external drive.
Hello Folks! I don't know if this posted earlier? If so, please disregard. If not, please help. I'll be backing up my iTunes library onto an external hard drive. From what I've read it's should be a rather simple process. Drag-and-drop, right? If I'm
-
Unbilled Revenue Reporting - without saving simulation billing documents
Hi, I would like to know if anyone has ever run unbilled revenue reporting successfully from BI without saving the simulation billing documents that are generated from the Mass Simulation Run? Can the information be exported to BI without saving thes
-
Paymentrun - "PAYMODE" Interface (Bank of America)
Hello SAPiens, before going in details: has anybody in this forum experience with an interface (outgoing payments) to Bank of Amerika's Paymode software? One of my clients wants to use the software, but as far as I can see it is not possible without
-
Is there any hope for an iPhone 4s that cannot access WiFi after iOS 8.1 ?
I bought a "very good" used unlocked 4s on eBay back on Oct 2 ... it arrived with iOS 8 installed ... AT&T folks told me not to load that SW when I went in to move my SIM from an Android phone to the iPhone ... when the saw it was already loaded they
-
Trying to sync different 700p under same user
Hello. Hope someone can help. My 700p died. Like the calendar/planner so I bought a used one. Trying to sync my calendar to the different 700p. my computer and hot sync are not recongnizing the different phone. Any hints? Post relates to: Treo