What is the setting to fit in a DVD5 (single layer)6 hours of video?

What is the setting in Compressor to fit in a DVD5 (single layer)6 hours of video?
No matter the quality in video or audio, just it has to be the same frame rate than the original 29.97 fps.
I've tried different settings but as mpg2 (2mbp) just allow me about 4 hours with AC3 audio, and as MPG1 fits the amount of time I need, but Toast recompress it.
Thanks for the feedback
R

Thanks for the support.
The video material is to review and correct script translations (Korean-spanish audio dubbing) that's why I don't need the most quality i cant get. I need random access to the material that's why I can't use a VHS in LP mode.
And in Fact I use a very handy external DVD recorder and yes it allows more than 6 hours in a DVD+R. But I stopped doing this workflow because You have to be checking the transfer because sometimes the Final Cut drops frames in playback.(I screwed 4 hours of work when it recorded about an hour of a single frame dropped in my lunchtime)
But I wonder if there is a workaround with compressor to do this task, i think not.
Cleaner allowed me to do the mpg2 at the data rate i Needed. And finish the task with Toast

Similar Messages

  • What is the setting- Pop up window 'Valuation' appears in Results Recording

    Hi,
    When i am doing Results recording in qa32, after processing all characteristics the status of all characteristics appears '5' but while saving it gives a pop-up window named 'valuation' where under 'valuate inspection point' sub screen field 'valuation' with entry 'Accept' in grey mode appears. Also a tab named 'valuation' appears on the same pop-up window with pencil symbol through with UD can be made in RR only.
    What is the setting because of which this pop up window comes while saving the results recording.
    Thanks in advance.
    Regards,
    Abhijit.

    HI,
    I am using insp. point 200 which have default valuse in valuation tab. In functional module tab no FM are attached.
    What are the setting required tobe changed in i want to use Insp. Point and do not want the Pop up window of Valuation.
    In some other cases i am using point and pop up doesn't come.
    Abhi.

  • PrCS5.5: what are the setting to produce a Blu-Ray disk with Encore CS5

    what are the setting for a sequence, media encoder, & Encore to produce a Blue-Ray disk.
    At present , I have tried several different combinations, but Encore just hinges

    sorry  i forgot the link...
    http://www.precomposed.com/tutorials/04_bluray_subtitles/
    at the end of tutorial , you find instructions for create a right iso image.
    Another thing. If you go to create a DVD Dual layer, Imgburn offers a excelent tool to set layer break. I prefer this option,and not Encore automatic option.
    You can check other tutorial
    How to write a Blu-ray Video disc using ImgBurn
    http://forum.imgburn.com/index.php?s=a3f19e39fa1a21b69df15414dc8b7a90&showtopic=9512

  • While creating partner profile, if the partner type is u0093LIu0094 what r the sett

    While creating partner profile, if the partner type is “LI” what r the settings we need to configure?

    Hi Chiru,
    For a IDOC to File scenario, just follow these steps:-
    SLD-
    1) Create a Product/Software Component
    2) Technical System pointing to R/3 system
    3) Business System for the above technical system
    In the Repository
    1) Import the Software component created in the sld
    2) Create a namespace,
    3) import the idoc and then create sender data type/message type etc and mapping
    4) Mapping Rules is depends on the requirement
    In the Directory
    1) Create a Scenario /import the business system
    2) Create Receiver/Interface determination
    3) Create communication channels for sender and receiver
    4) Sender Agreeement and Receiver Agreement.
    Then the file adapter configuration is depend on the input file format.
    Also you need to have Logical destionation created in the XI , and the IDX1 entry
    In R/3 Port, Partner profiles etc should be created
    Have a look into this document~
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
    In addition do the following in XI:
    1. SM 59 - Create RFC destination pointing to R3.
    2. IDX1 - Create a port for R3
    3. IDX2 - Import IDOC metadata.
    I hope this provides you a solution.
    Regards.
    Praveen

  • How can i get my phone to read my text what is the setting for that

    im trying to figure out the setting where u can turn on when a text comes in I want it read to me my friend has a speak button

    settings>general>accessibility

  • What is the recommended way to do multiple channel, single point sampling for control with an NI PCI-6255 in RLP?

    Hello,
    I am writing a driver for the M-series NI PCI-6255 for QNX. I have downloaded the MHDDK and have all the examples working. I have also enhanced the examples to do interrupt handling (e.g. on AI_FIFO interrupt or DMA Ring Buffer interrupt). My ultimate goal is to write a driver that I can use for closed-loop control at 500 Hz using all 80 channels of the NI PCI-6255. I may also need to synchronize each scan with a NI PCIe-7841R card for which I've already written a driver. I want an interrupt-driven solution (be it programmed I/O on an interrupt or DMA that generates an interrupt) so that the CPU is available to other threads while the 80 analog inputs are being read (since it takes quite a while). I also want to minimize the number of interrupts. Basically, I will need to collect one sample from all 80 channels every 2 milliseconds.
    There are many different options available to do so, but what is the recommended technique for the NI PCI-6255 card? I tried using the AI FIFO interrupt without DMA, but it seems to interrupt as soon as any data is in the AI FIFO (i.e. not empty condition), rather than when all 80 channels are in the FIFO, so more interrupts are generated than necessary. I tried using DMA in Ring Buffer mode to collect a single sample of 80 channels and interrupting on the DMA Ring Buffer interrupt, which appears to work better except that this technique runs into problems if I cannot copy all the data out of the DMA buffer before the next AI scan begins (because the DMA will start overwriting the buffer as it is in ring buffer mode). If the DMA is not in ring buffer mode or I make the ring buffer larger than one 80-channel sample then I don't have a way to generate an interrupt when one sample has been acquired (which I need, because I'm doing control).
    I saw something in the documentation about a DMA Continue mode in which it looks like you can switch between two different buffers (by programming the Base Count/Address with a different address than the current address) automatically and thereby double-buffer the DMA but there is no real documentation or examples on this capability. However, I think it would work better than the Ring Buffer because I could interrupt on the DMA CONT flag presumably and be copying data out of one buffer while it is filling the other buffer.
    Another option would be DMA chaining, but again, I cannot find any information on these features specific to the NI DAQs.
    I tried interrupting on AI STOP figuring that I could get a single interrupt for each scan, but that doesn't appear to work as expected.
    I know that DAQmx on Windows has the ability to do such single sample, multiple channel tasks at a fixed rate so the hardware must support it.
    Any suggestions would be appreciated.
    Thanks.
    Daniel Madill

    Hello,
    The interrupt that will happen nearest the times that you need is the AI_Start_Interrupt in the Interrupt_A group. This interrupt will occur with each sample clock. By the second time this interrupt fires, the AI FIFO should have the samples from the first conversion. If it is easier to use programmed IO, you can read the samples out of the FIFO until you get all 80.
    Additionally, you can set the DMA to send samples as soon as the FIFO is no longer empty...instead of waiting for half full or full. This change will reduce latency for your control loop. You can set AI_FIFO_Mode in AI_Mode_3_Register to 0. By the second time this interrupt fires, you should be able to check how much data is in the DMA ring buffer and read the 80 samples when they are available. You can make the ring buffer larger than 80 samples if you see data getting overwritten.
    There is no interrupt associated with 80 samples being available in the FIFO or 80 samples being available/transferred by DMA to the host. X Series has much more flexibility with these interrupts.
    I hope this helps!
    Steven T.

  • What is the difference between combo dive (24x) and Double layer (8x) ???

    Hi everyone,
    I am helping my girlfriend to purchase a new Macbook, so I would like to know (I guess she) what is the difference between the combo drive (24x) and double layer (8x) divers? Although I have a Macbook Pro, I could not give to her an right answer about this simple question—what a shame!
    Thanks,
    M

    From my P.O.V, being able to burn DVD's is a fairly standard feature these days and is very useful. I have the 2.4 and am very happy with it, i would always buy the best one can afford at the time as it goes out of date so quickly, so i would personally go for the 2.4, yes, but it depends on whether she thinks she is actually going to need that DVD burning facility.
    REgards
    Rowan

  • What is the latest version of Identity Manager, Enterprise Single Sign On

    Good day,
    where can I download the latest version of Identity Manager, Enterprise Single Sign On, also know if there are any patch for the latest version,
    Very grateful

    Oracle Identity Manager (9.1.0.1) Download:
    http://www.oracle.com/technology/software/products/ias/htdocs/101401.html
    Connectors:
    http://www.oracle.com/technology/software/products/ias/htdocs/connectors.html
    Oracle Enterprise Single Sign-on Suite Plus (10.1.4.1.0)
    http://www.oracle.com/technology/software/products/ias/htdocs/101401.html
    All Patches For All Oracle Products - Refer to My Oracle Support

  • What is the set-up when transfer files through target disk mode

    I'm a bit confused on how to set up the macs to do a file transer in target disk mode.  I am transferring files from an imac to a macbook pro.  I have the cable 6pin to 9pin.  Now what I can't remember (apple.com instructions is what confused me) is on which computer do I hold down the  'T' on start up?  Is it the computer I am transferring the files to? ( in this case the macbook pro).  I use to do this fairly often, but not recently, and I have forgotten.  Any help would be greatly appreciated. 

    Transferring files between two computers using FireWire - Apple

  • What does the setting 'use system proxy setting' mean?

    I am using a proxy server that requires my email address which I need to change. I can't figure out how to change the proxy server settings. Under preferences, network, settings, the checked box is 'use system proxy settings' -- I don't know what this means or how to see what the proxy setting is and possibly change it.
    Thank you

    If the default "Use system proxy settings" is selected then Firefox will try to query the OS to find which settings to use.<br />
    If you want to use a specific proxy in Firefox then you can select use "Manual proxy configuration" and enter the URL and port number that you want to use.
    * http://kb.mozillazine.org/network.proxy.type
    * http://kb.mozillazine.org/Network.proxy.%28protocol%29
    * http://kb.mozillazine.org/Network.proxy.%28protocol%29_port

  • What does the setting "auto increment column templates"

    I have noticed that there is now a setting "auto increment column templates" but I cannot find out what this setting does.
    There are no sequences generated nor triggers.
    Version 3.0.
    Thanks, Joep

    There are no sequences generated nor triggersYou need to set column as "auto increment". Then sequence and trigger will be generated for Oracle.
    You can set template for generated sequences and triggers and can override these settings at column level setting explicitly the name of sequence and trigger.
    The sequence and related trigger are not created as objects in physical model, however if there are such objects defined then definition from physical model is used for generated DDL.
    Philip

  • What are the cases that fit the late 2013 retina display MacBooks?

    So I recently bought a late 2013 MacBook Pro Retina Display and I know that they are a little thinner than previous models.  I want to know what cases would fit this laptop. My google searching abilities are very low.  If anyone can help me please let me know.

    It is the width that is more important.
    You do not say 13'' or 15''

  • After upgrading to version 4.0 my email money bank transfers do not work. Bank says it is browser issue but what is the setting that needs to be changed?

    I do a great deal of online banking. Recently issue an email money transfer from an account with one bank to an account with a different bank. Have done this regularly in the past with no problems. The transfer could not be completed. After consulting the IT people at the bank I was advised the problem is with the browser, but they were not certain of what specifically is the problem or how to fix it. They advised I try to do the deposit using another browser. Went to Chrome, accessed the email transfer info and the deposits went through normally. I assume the problem lies somewhere in the security settings with Firefox, but could not find any information to help me.

    I too , have had my phone crash after installing the iphone 4 update. It would not update and connect to itunes after installing it. My phone was not accesable at all.
    I took it to the apple store in London and for an hour and a half waited for them to resolve the issue.
    They seemed far more interested in selling their new iphone 4 than helping existing customers.
    I was told it was a physical connection problem cord. I knew this was not the case and as I had my laptop with me proved it wasn't.
    After 2 hours they replaced the handset and I am now in the process of restoring the backup.
    I strongly advise not to install the new software.
    GET YOUR ACT TOGETHER APPLE!!!!!

  • Since upgrading to 10.7 and 10.7.2 I can no longer go "home", "library"...etc. What is the setting to turn this back on?

    iMac Core 2 Duo 3.06  4GB RAM  OSX 107.2
    In OS X 10.6.8, if I were in the Finder, I could click on GO, the click on HOME and it would display a list of places I could go, one of which was my "library" folder. Since the upgrade to 10.7 and 10.7.2, I cannot do this. There is nothing after Home except Applicatations, Desktop, Docs, Downloads, movies, music, picures, public, and sites. Opened all of those and no library anywhere. I have to think this is the result of a setting which hides library to protect it from non savvy users. I've been doing maintenance from that folder forever. Please help.

    Click GO from Finder and hold down the Option key. You'll see the Library folder in the list. Or you can click GO  and select Go To Folder and type ~/Library. This will open the user\Library folder.

  • When i close the firefox, it need to ask that save and quit or quit like that. what is the setting for this??..

    i need that all the tabs to be save while i close the firefox. the while open all should restore

    One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
    # Repeat this for '''browser.warnOnQuit''' and '''browser.warnOnRestart'''

Maybe you are looking for