What is the shortcut to open|close the Sidebar?

I was very used to have F9 on every platform to open|close the sidebar.
As I am a keyboard people, the clicking on the Sidebar icon is not a perfect solution. You had the shortcut and now it's gone.
I respectfully ask for it back.
No troubleshooting info is required, because it's not a failure.

@Aleksej: My version of Firefox is 36.0.4 in Linux Ubuntu 14.10. The sidebar that I want to open is the one that has Delicious service inside of it. I suppose other services or kind of things might be in it.
@cor-el: I know that using Ctrl+B gives me the Bookmarks sidebar, or Ctrl-H the History one. Precisely, that is the shortcut that I'm looking for, so I can open|close the Delicious service, or anything else that can be opened|closed with the Sidebar icon.
I'm looking NOT to use the mouse to open|close, but a keyboard shortcut.
I already know that the Customize keyboard plugin does NOT bind a new shortcut, and the Sidebar shortcut is NOT included... or maybe I'm wrong, :D

Similar Messages

Shortcut to open/close selected film roll

Is there a way to open or close a selected film roll using a keyboard shortcut rather than clicking on the tiny arrow?
Thanks
George

None that I've found. When I've moved the cursor to select a roll I'm close enough to the arrow to click on it without much movement.

What is the best way to open close and pass instrument handles from labview in teststand parallel model?

I have a number of test systems that use a parallel model with labview. We have a good number of instruments(PXI).
What is the prefered method for open,closing and passing instrument handles in teststand using labview?
Solved!
Go to Solution.

Hi,
No, Below is a bit from the Session Manager Help
Currently, Session Manager supports the following instrument session types:
IVI Sessions—Use an IVI session to obtain the C-based instance handle for an IVI logical or virtual instrument name. NI Session Manager does not support IVI-COM drivers at this time. When IVI-COM drivers are available, you can use an IVI session to obtain an ActiveX interface reference to an IVI-COM driver.
VXIplug&play Sessions—Use a VXIplug&play session to obtain a C-based instance handle for a VXIplug&play logical or virtual instrument name. Configure VXIplug&play names in the <VXIplug&play directory>\<Platform directory>\NISessionMgr.ini file.
VISA Sessions—Use a VISA instrument session to obtain a C-based viSession handle to a VISA resource or logical name. Configure VISA logical names in the <VXIplug&play directory>\<Platform directory>\NISessionMgr.ini file.
Custom Sessions—Use a custom session to create a data container object that shares ActiveX objects you create or other data between software components you write. Use the Attach and Get methods to attach data to and retrieve data from a session. A custom session does not initialize, close, or own an instrument handle. The data you share with a custom session does not have to be instrumentation related. You can create a custom session with any name you request.
Regards
Ray Farmer
Regards
Ray Farmer

What is the purpose of open/close connection data socket?

Hello everyone,
I am writing and reading values in OPC Server through data socket. What is the purpose of open/close connection data socket when writing /reading a value? Without the open/close connection element, it still work correctly. I am writing values in the server thru event stucture.I do not need any buffered reading or writing. What will happen if I didnt not use the open/close connection? Maybe it may cause some problems in my program which i didnt realise?
And I have attached an example of my program. Thanks
Yehchia
Attachments:
Test Event.vi ‏11 KB

Hi YehChia,
I was talking about something like that:
1. Not good. since with every iteration the DS connection needs to be opened and closed.
2. Good. Since you open the connection only once then do the reads and close it afterwords.
Christian

What is the proper way to close all open sessions of a NI PXI-4110 for a given Device alias?

I've found that, when programming the NI PXI-4110 that, if a the VI "niDCPower Initialize With Channels VI" (NI-DCPower pallette) is called with a device
alias that all ready has one or more sessions open (due to an abort or other programming error) a device reference results from the reference out that has a (*) where "*" is post-fixed to the device reference where and is an integer starting that increments with each initialize call. In my clean up, I would like to close all open sessions. For example, let's said the device alias is "NIPower_1" in NI Max, and there are 5 open sessions; NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4). A simple initialize or reset (using niDCPower Initialize With Channels VI, or, niDCPower Initialize With Channels VI, etc.) What is the proper way to close all open sessions?
Thanks in advance. Been struggleing with this for days!

When you Initialize a session to a device that already has a session open, NI-DCPower closes the previous session and returns a new one. You can verify this very easily: try to use the first session after the second session was opened.
Unfortunately, there is a small leak and that is what you encountered: the previous session remains registered with LabVIEW, since we unregister inside the Close VI and this was never called. So the name of the session still shows in the control like you noted: NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4), etc.
There may be a way to iterate over the registered sessions, but I couldn't find it. However, you can unregister them by calling "IVI Delete Session". Look for it inside "niDCPower Close.vi". If you don't have the list of open sessions, but you have the device name, then you can just append (1), (2) and so forth and call "IVI Delete Session" in a loop. There's no problem calling it on sessions that were never added.
However - I consider all this a hack. What you should do is write code that does not leak sessions. Anything you open, you should close. If you find yourself in a situation where there are a lot of leaked sessions during development, relaunching LabVIEW will clear it out. If relaunching LabVIEW is too much of an annoyance, then write a VI that does what I described above and run it when needed. You can even make it "smarter" by getting the names of all the NI-DCPower devices in your system using the System Configuration or niModInst APIs.
Hope this helps.
Marcos Kirsch
Principal Software Engineer
Core Modular Instruments Software
National Instruments

When I try to download acrobat xi pro it tells me to first close excel.exe, however, I don't see anything open. what is the problem?

when I try to download acrobat xi pro it tells me to first close excel.exe, however, I don't see anything open. what is the problem?

Hi,
Did you check the task manager on your computer.
Thank You

My iPad dosen't open, my screen is black even if I use the open/close buttun??what can I do

My iPad won't open, my screen is black even if I use the open/close reset botton???

Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset (not sure whether this is what you meant by a reset) ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the

Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me

Doing those doesn't turn off your phone?
As stated hold down the top button only until you see the red slider to power off your phone.
If that doesn't work then take it to Apple and see what they say.

What is the shortcut to open the toolbar in Logic X?

What is the shortcut to open the toolbar in Logic X.? Previously it had been Escape but that is not working anymore.

Press T
You might find this website useful for learning new key commands or locating them depending on which type of keyboard you have....
http://www.logicprokeycommands.com/logic-pro-x-key-commands/

I cannot open a webmail shortcut-what is the problem?

My husband has a shortcut icon that he uses to access his webmail. Just this week it did not open as usual. I tried replacing the shortcut with another one as suggested in your help section and it still does not open. All other shortcuts on our desktop are opening as usual.

What format is the song in? What is the exact error message iTunes is giving you?
B-rock

What is the diff b\w open form and start form in scripts.

Hi,
can any one tell me what is the diff andb\w open form and start form in scripts.when we should use open form and when start form.

Hi Friend.
I have understood some usefull information and would like to share with you.
Within one transaction, you can open and close several layout sets using OPEN_FORM and
CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control
whether the output is stored in the same print request. But also the SAP spool decides,
depending on several plausibility checks, whether new output is appended to an existing
print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but
several layout sets for different customers. To have the output for each customer begin with
the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the
layout set again. Within one print request, first call the function module END_FORM. It
executes the final processing for the current layout set. Then start the layout set again
using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
Hope your obstacle is cleared.
If not do ask me again?

What is the preferred way to open a new url in a new window/popup?

Hi Guys,
I have an application that requires me to show another URL (Fedex tracking number) once a button is clicked.
what is the preferred way to do it?
Should I open a new browser or a popup?
I would appreciate if you have a code example I can use.
Thanks,
Itay

hi,
For opening a URL , you could also close previous window and open a new browser.
Follow the steps :
-> make an outbound plug in your window.
-> Add URL of type string as a parameter for your outbound plug.
->Do remember to add Component Name in the Properties Tab of View ( othervs Calling Outbound plug of win from view wont b psbl).
Write the below mentioned code to call a URL in the OnAction of button :
DATA lo_zexit TYPE REF TO ig_zexit .
lo_zexit =   wd_this->get_zexit_ctr( ).
lo_zexit->fire_out_window_plg(
    url =   'http://www.google.com'                            " string
here replace ig_zexit with your ig<applicatin name>.
Other way around is using Code Wizard ( control _ F7).
Write the below code in the onaction of button :
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).CALL METHOD lo_window_manager->CREATE_EXTERNAL_WINDOW
EXPORTING
    URL            = 'http://www.google.co.in/'
    MODAL          = ABAP_FALSE
    HAS_MENUBAR    = ABAP_TRUE
    IS_RESIZABLE   = ABAP_TRUE
    HAS_SCROLLBARS = ABAP_TRUE
    HAS_STATUSBAR = ABAP_TRUE
    HAS_TOOLBAR    = ABAP_TRUE
    HAS_LOCATION   = ABAP_TRUE
RECEIVING
    WINDOW         = lo_window.lo_window->open( ).
You can choose any way whichever suits your requirements.
I hope it helps.
Thanx.

What is the difference in PS E12 between 'File Open' and 'File Open in Camera Raw' ?

Both routes launch a screen saying Camera Raw 8.3 - Canon EOS 5D Mark III?
Likewise on this screen there is 'Cancel' and 'Done' Buttons', what is the difference both close that screen.
I am assuming the 'Done' Buttons saves any manipulation of exposure or colours you may have made? and the 'Cancel' just forgets them?
Is there a manual for this product; that one can reference, screen by screen? explaining what each option actually does.

Chucky-Tiger wrote:
Both routes launch a screen saying Camera Raw 8.3 - Canon EOS 5D Mark III?
If you are opening a raw file (.CR2), both routes are identical, because you have to convert raw files in ACR anyway.
If you are opening a jpeg file, you can open the file directly in the Elements Editor (Open),
or
you can open it the the ACR module. The dialog is the same (or nearly) as for raw files, with the same sliders and features, including some you don't find in the editor : clarity, advanced denoising...
There are advantages in opening jpegs in ACR, especially because ACR works internally in 16 bits and in a wider color gamut. Very important for me is the fact that the ACR modules saves its edits as 'recipees' in the metadata section of the jpeg files, without changing any pixel value of the original.
Likewise on this screen there is 'Cancel' and 'Done' Buttons', what is the difference both close that screen.
I am assuming the 'Done' Buttons saves any manipulation of exposure or colours you may have made? and the 'Cancel' just forgets them?
Cancel does cancel every edit you have started. You are back to the original file.
'Done' saves your edits, as you rightly assume.
'Open' saves the edits and send them to the editor for further editing if you want, for local retouch or using layers for instance.
'Alt Open' does not saves the edits, but sends the edited result to the editor.
'Save' is only used if you wish to convert the raw files to the DNG format.

What is the best form to control a open of database?

Hi,
what is the best form to open a database?
I´m understood that Environment is unique for all aplication, and I think that it is good to put on Singleton Pattern, but I don´t know the best form to do it with the databases.
I think two forms, the first is create a singleton open database, with this form I don´t will close the database and all application will use it. So, the second form is open a data base at the moment that I will use it, for example, into a DAO when I will do inserts, deletes, etc, and at the final of the operation I close the database.
So, I don´t know what form is the best, and if those forms are corrects, if exist another form to do it I would like to know.

Hugo,
An application can choose to use one or more Environment and Database instances in a single process. In other words, it is the application's choice whether it wants to instantiate a single Environment or Database and share it among multiple threads, or whether it wants to instantiate multiple instances.
Choosing one pattern or another is a function of your application's design, and performance considerations. As you say, you could instantiate a single Database instance and pass it around, or you could open and close the Database every time you get a data record. A third choice is to open a Database instance per thread, and reuse that for the life of the application.
The second choice of opening and closing the Database per data record access is pretty heavyweight from a performance point of view. There is a fair bit of overhead to the initial open of a database, and to the final close. Follow-on opens are not as heavyweight, but do have some cost. For example:
// expensive
thread 1 calls Environment.openDatabase() or new EntityStore()
// less expensive, database is already open, thread 2 is really just getting a handle
// onto the database, but still more expensive than a read or write of a data record
thread 2 calls Environment.openDatabase() or new EntityStore()
The first choice of using a single Database instance in your process will perform much better. If your application has a high level of concurrency, there can be some contention on the Database instance, described in this FAQ - http://www.oracle.com/technology/products/berkeley-db/faq/je_faq.html#32 and you may prefer to try the third option of using a Database instance per thread.
Regards,
Linda

What is the use of 'ALTER DATABASE CLOSE'?

Hello Everybody,
SQL*Plus: Release 10.1.0.2.0 - Production on Ma Aug 15 21:28:30 2005
Copyright © 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> conn / as sysdba
Connected.
SQL> startup force
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
Database mounted.
Database opened.
SQL> select status from v$instance;
STATUS
OPEN
SQL> alter database close;
Database altered.
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16196: database has been previously opened and closed
If i have to shutdown the instance and database then
WHAT IS THE USE OF 'ALTER DATABASE CLOSE' ?
I need explanation. Why should i shutdown?
Dont give me this answer.
ORA-16196: database has been previously opened and closed
Cause: The instance has already opened and closed the database, which is allowed only once in its lifetime.
Action: Shut down the instance.

If you read the documentation you will see that there is no ALTER DATABASE CLOSE command.
This is an undocumented Oracle command, which we are not supposed to use. Consequently we are not allowed to complain about the way that it works. Instead we're supposed to use SHUTDOWN IMMEDIATE.
Cheers, APC

What is the shortcut to open|close the Sidebar?

Similar Messages

Maybe you are looking for