What is the shortcut to "print" and then email the PDF
I email pages that I have "printed" out all the time.
But it takes three steps to do this
1. Command P to "print" the page
2. Then move the mouse to the PDF button on the bottom left
3. Then scroll down to the "Mail PDF" option
Would it not be wonderful to be able to do this in a single click.
Please can someone help.
Thank you
This discussion about an Automator action to print to PDF and email the document looks promising:
https://discussions.apple.com/thread/4939564?start=0&tstart=0
Hope that helps.
Ivan
Similar Messages
-
How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?
Actually, you can email up to 5 at a time from the Photos app. Select any more and the email share option will not appear.
If you explain why you need to email large numbers of photos, we might be able to offer an alternative. -
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend! -
You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling the product or contacting your IT administrator or adobe customer support for help
This forum is none of those things. That being said, we may be able to help.
Have you tried uninstalling and reinstalling the product? If not, please consider following these instructions:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel -
How do I turn off open apps? You use to be able to press the home button twice and then hold the app icon until is vibrated and then turn it off.
WOW - Can't this be a flashing message in the forums since it's been asked about a 1,000 times now.
-
How come everytime i add an image to my pages document the screen goes blank and then closes the app?
Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy -
Can I edit with Smart Print the same way I could with Smartweb Printing and then save as PDF files.
With Vista basic and SmartWeb Printing you had the option to edit your pages and then to save or print them in the PDF format. This way you could customise various pages pages, save them to a file and then reopen the whole file to see if you wanted to make any further changes before printing the final copy.
sharjorSteve M. wrote:
I installed the full suite of Canon printing, scanning, faxing and whatever else software they provide for this all-in-one.
Maybe you don't need that. I prefer using Apple's Image Capture for scanning.
Right now I am working on scanning documents into PDFs. The Canon software lets me create multipage PDFs which is something I've been wanting to do. My question is, is it best to scan images as JPEGs and then save them as a multipage PDF or is it best to scan into PDF directly (which the scanner seems to offer as well) and then save as a multipage PDF? I'm thinking in terms of the best optimization of file size vs. image quality and things like that.
Let the software do it for you. That will be fewer steps for you. Image-based PDFs are going to be large. There is no way around that. If they are too large, you can use Preview's Save As feature and play around with the Quartz Filter.
Is the scanner actually doing anything differently when scanning into JPEG vs. PDF? Or is the scanning all the same and it's just the saving of the file that is different?
Scans are scans. The JPEG file format is lossly and will look worse than other types. If you are scanning in photographs, the JPEGs will look good. If you are scanning in crisp text, JPEGS will have lots of artifacts and look bad.
In general what dpi setting is usually sufficient to use to scan a basic text document without taking up too much file space?
I pretty much always keep it at 300 unless I need something special or when the original is really small and I intend to blow it up. -
How can I uninstall Firefox and then download the latest version. I inadvertently downloaded too many and they won't download correctly. I have a Macmini Leopard.
== This happened ==
Not sure how often
== Not sure ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_7; en-us) AppleWebKit/531.9 (KHTML, like Gecko) Version/4.0.3 Safari/531.9Hi, Barbara! Is the problem that you have a lot of different versions of Firefox on your launch bar? Or that you have a lot of different versions in a directory somewhere?
Either way, on the mac, you should be able to simply:
1. Close all versions of Firefox
2. Drag the applications to the trash folder, which will remove them from the folder or your dock
3. Download Firefox with Safari at getfirefox.com
4. Open the downloaded file by double clicking it
5. Once that happens you will have a Firefox icon and a folder with an "A" on it
6. Drag the Firefox icon onto the A, which will install it into your Applications folder
7. Open your Applications folder and drag it onto your main dock
8. You should be able to launch it from your dock by clicking on the Firefox icon.
Thanks! -
Our 2009 Mac Mini became quite sluggish and then just wouldn't function. I tried reloading the OS with the original disc from Apple, but the computer rejected the disc and the screen was all blue. Next, I shut down the machine, inserted the disc, turned it on, the screen is a faint gray in color, Apple logo in the middle, the disc came out. What should I next try?
Apple logo in the middle,
The Apple logo is not contained in your Mac's ROM. Seeing it indicates that your Mac found a bootable device, and loaded the initial blocks from that device. I expect you booted from the damaged hard drive.
Use the Option key held down at Startup to get clarity over exactly what drives can be seen, and what your Mac thinks they contain. Wait for it to draw an icon for every potentially-bootable Volume. Deliberately select the device you want to use as the Boot Drive.
You must have a wired keyboard plugged directly into the chassis to use snag keys at Startup. A wireless keyboard that is already paired can be used, but the exact timing is more difficult. -
How do i sign a document sent in a email and then email the document back to sender?
How do a sign a document I received in an email, an then email signed document back to the sender?
The hard way is to print out the document, sign it, then scan it to a PDF, and finally email it back.
The easy way is to first scan in your signature. Then you can open a received document, paste in your signature, and return it via email.
In my case I made several signatures on a blank sheet of paper, scanned in the sheet, then used Graphic Converter to select the best exemplar and saved it to a separate file as a JPEG image. When I receive emailed documents requiring a signature I have them sent as PDFs. I then use a third-party application, PDFPenPro, to edit the PDF and to paste in my signature. I save the edited PDF and return it via email. -
I have attempted to delate Comodo AV, from my iMac. I have achieved this to a degree, as when i search for "Comodo" on finder, nothing appears. However the icon still appears in the status menu bar at the top right of my screen. Comodo worked fine, until the upgrade to Mavericks. I contacted Comodo and they said there should be no problem with Comodo AV working in Mavericks. Clearley this wasn't the case. I deleted as much of the software as i could, but have been left with hidden traces of Comodo's presence.
I there fore have two questions,
How can i take the icon out of the status menu bar? I have tried app removers without any luck as according to finder there isnt any comoso on the mac. I have also tried to use the "cmd and drag" technique, but again nothing happens.
How can i find the residue of Comodo on my hard drive if it is not showing up on any search?
I would really like to resolve these issues and any support would be greatly received.
thanks
TimMany thanks, Phil. I purchased the app you recomended, and following a bit of messing about, achieved both of my desired outcomes.
For your information yes there was a quit option, but this only worked as long as i was logged in. Whenever i logged out and back in again it returned.
thanks again,
Tim -
How can I change the sites homepage 365 and then make the changes public?
Hi is there any way I can change the look of the sites homepage and make it public so anyone who logs in see's the additoinal webparts etc.
it seems I can only create a personal view of the sites page which is slightly annoying as I would like to add a few announcements for users on the Intranet who go to the sites page.I created a link to the sites page as shown in the image above.
but I noticed the link goes like this:
https://mydomain.my.sharepoint.com/personal/ausername/Social/Sites.aspx
how can I link to the sites page without having to link to a particular user? what would be the link for that so when it goes to the sites page it goes to the sites page for that particular person?
thanks -
I inherited my husband's iphone 3. iTunes is on our PC in his profile. I now have a iPhone 4S. If I sync the iPhone3 with iTunes, will it bring across his contacts, email account etc?
Is there a way to get all my information from the iphone3 cleanly onto the iPhone4S?
Thank you.No need to switch. You can use both his apps, music, etc. and yours.
-
Topic title basically sums it up.
Alright. For my case was, my source files are inside the Document folders. Since importing the pictures into Aperture, deleting the source files/folders did not cause any problems with Aperture.
Whether it is a good idea or would depend on how comforatble you are with the idea in the first place. On one hand you can save up precious hard disk space, while on the other if the Aperture library gets corrupted, you might lose everything. Of course, having a backup of the Aperture library helps, as well as a time machine backup of it. On top of that you can also have an Aperture Vault to backup the library to a external drive.
In summary i think a reasonlable backup plan is just as important regardless of whether or not the source file is in which location. For my case, i only have the Aperture library as all of my source. A time machine backs up everything including my library, in addition to that, i also use Aperture Vault to back up to another external drive just in case. -
Check a condition and then put the transaction as read-only
Hello people,
I need to make a check in Purchase Order (ME21N and ME23N), so that when the user enter in transaction, I will check if the invoice was registered and then put the purchase order in "read only" state.
How do you suggest me to do it?
Loop at screen? Is there a state flag to set?
Thanks a lot!!!Hi,
I didn't get your requirement correctly. When using ME21N, your purchase order is not yet created. What is the meaning of set the T-code in display mode only for the PO? ME23N is already display only T-code. If you are refering to ME22N, then probably you can think of a custom T-code where you can call ME22N/23N based on the check.
Thanks,
Vinod.
Maybe you are looking for
-
Hi , I have a query, Vendor is set for deletion .Blocked in Source list. I have open PO for the Vednor. Is it possible to create GR for Open PO's? Thanks
-
Calling a method that returns an object Array
Hello. During a JNICALL , I wish to call a method which returns an object array. ie my java class has a method of the form public MyObject[] getSomeObjects(String aString){ MyObject[] theObjects=new MyObject[10]; return theObjects Is there an equival
-
Is there something I need to do? Can't open or purchase. If I remove and download a new Itunes program will I loose all that I've already purchased? Or do I just return all my I-stuff and contact consumer affairs?
-
I've been trying to set up my instruments for hours now and resorted to calling up M-Audio (after persistent Audiomidi crashes) who have informed me that Quicktime 7.2 screws up all "Class Compliant" midi devices. Apple is responsible for writing the
-
When I run my SQL query in MS Access it ask for value ...I don't know why
Hi, Below is my SQL Query: SELECT employee.Name, employee.Emplid, payudds.Udds, data.Budget, data.Fund, data.FTE, data.[Annualized Rate], data.[FN Dist Pct], data.Udds, data.Project, data.[Empl Class] FROM ((employeeuddslink INNER JOIN employee ON em