What is the significance of define status profile for user status
hi friends
what is the significance of define status profile for user status. what does it contain
Regards
Vinny
Edited by: vinny novice on Dec 29, 2008 1:53 PM
Hi
please see Kathir's article on ststus profile
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/supplier-relationship-management/how%20to%20configure%20user%20status%20in%20mysap%20srm.pdf
regards
Muthu
Similar Messages
-
Screen "Define Status Profile for User Status" should not open in changemod
Dear all ,
After following the path CRM>SPRO>SAP IMG -->Customer Relationship Management -->Transactions -->Basic Settings --> Status Management -->Define Status Profile for User Status.
the screen opens in change mode & allows user to carry out the changes, this is very crucial screen & hnece should not be in open mode ,kindly advice on closing the same.so that it opens only in display mode for production system.
RegardsHi Milind,
To Block changes to any Object their is a Provision for the same in Client Deatils Screen
Go to TCode:SCC4
Check the Tab Cross-Client Object Changes
Try setting the Option (3.No Changes To Cross-Client Customization Objs)
Following Options Symbolises:
Changes to the Repository and cross-client Customizing permitted
There are no restrictions on the maintenance of cross-client objects for the client when this setting is used. Both cross-client Customizing objects and objects of the SAP Repository can be maintained.
No change to cross-client Customizing objects
Cross-client Customizing objects cannot be maintained in the client with this setting.
No change to Repository objects
With this setting, objects of the SAP Repository cannot be maintained in the client.
No change to Repository and cross-client Customizing objects
Combination of both restrictions: Neither cross-client Customizing objects nor objects of the SAP Repository can be maintained in the client.
(Choose This One it Should Resolve your Problem)
Hope it answered Your Queries..
Thanks and Regards,
RK. -
Status Profile and User Status for Support Message
Hi All,
We need to customize Status Profile and User Status Specifc to customer requriments.
we need the following Status for Support Message:
Open
Accepted
Rejected
Fixed
Retest
Closed
Note:
1] Only the Message creator should be able Set staus Open and Closed
2] Message Processor should only set status Accepted, Rejected, Fixed and Retest
I have created the Status Profile in BS02.
Can some one help me the steps or guide how to implement the above logic and restrict the status access between Message Creator and Message Processor
Thanks!
Regards,
Pradeep L> 1] Do i have to create different Auth.key for Message processor and Message creator and then assing them in BS02 to Status Profile?
Anand: Diffrent authorization key for different statues......not for message processor and creator
> 2] Now how do i assign this Auth.Key to the Auth Object B_USERSTAT?
Anand: Using Tcode PFCG, this can be done.... Consult Basis.....
> do i have to create a new Zrole and assign or is there any other way.
Anand: Yes u need to create a Z role and include that authorization objects in that z role....
so u might have to create 2 Zroles and then assign them to the persons concerned....
Inspire ppl by rewarding
Regards,
Anand... -
Hi
Does Flash Player auto-update have the ability to update systems when a user does not have administrator access on their device?
What will the results be if we enable Flash Player auto-update on OSX and Windows systems where:
1. Users are log in with accounts that DO NOT have administrator access; and
2. Internet access is granted via a proxy server, but only when a user with NO administrator credentials is logged in.
Thanks in advance.Maria
So there's no way to completely turn off user notification AND allow background updates unless you use a locally hosted update server? That's too bad.
Reading page 26 of the manual, I see there's an mms.cfg file that you can configure, with an option SilentAutoUpdateEnable, which is described on page 32:
SilentAutoUpdateEnable
SilentAutoUpdateEnable = [ 0, 1 ] (0 = false, 1 = true)
Availability: Flash Player 11.2 for Microsoft Windows, and Flash Player 11.3 for Macintosh
Enables a Flash Player update to install silently in the background with no user interaction. Installs both the ActiveX and plug-in players when appropriate. This type of update is called a Flash Player background update.
Standard users cannot disable background updates if they are enabled by an administrator.
Depending on the type of browser, if the user has a browser open at the time of an update, the browser might not use the updated player immediately. For more information, see "Performing a background update" on page 19.
The default value is 0 to disable background updates.
So you're saying that even if we enable this option (but don't configure a local server), users may still be prompted some or all of the time? -
How to use the selection profile and status profile for production order?
Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shiHi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM -
What is the significance of this setting..?
Dear All,
Can you please tell me what is the significance of the following settings in the Availability check configuration.
IMG - SD - Basic Functions - Availability check & TOR - Availability check - Availability check with ATP Logic or Against planning - Define default settings.
Here we maintain availability check rule for each Sales area. In our system for some sales areas it is maintained as C and for some B and rest blank.
Your help is solicited.
Regards,
VishiHi Vishi,
Here is the details of availability check rule in default setting from SAP F4 help....
Blank Dialog box in the case of shortages (batch/BAPI full dlv.)
A One-time delivery
B Full delivery
C Delivery proposal
D Dialog box in the case of shrtages (batch/BAPI one-time dlv)
E Dialog box in the case of shortages (batch/BAPI dlv. prpsl)
1 Delivery proposal for product selection
I guess this is self explanatory...... if you have further doubt revert back....
Thanks,
Raja -
What is the significance of Marker interface? Why are we using, even though
What is the significance of Marker interface? Why are we using, even though it has no method?
Well, what's the significance of an interface? They can define a set of methods a class may implement but the class could equally well implement these methods without the interface so why having interfaces at all?
The answer is that the most important aspect of an interface is that it constitutes a type (you can declare variables of it). And it's a type regardless of how many methods it defines, including none. So the reason for having a marker interface is that you're interested solely in the type aspect of interfaces. -
Status Profile for the supply relationship Vendor
Hi Experts,
We have a requirement to maintain status profile for the supply relationship. we try here to just copy from standard but we don;t get through. since we are not able to assigned here Business transaction as well as when we assign this profile to the inspection type 01, system gives wanrning message that "Status profile QM_P_00X is not allowed for "Insp. lot with plan and char."
Pl help me to resolve this issue
MVWe have defined Status Profile QM_L_00X that is copy of SAP defined status profile QM_L_003. we have maintained two status RRNR and QINF. In RRNR Maintained business transaction make usage decision :-disalowed (X) and set action (X) and result recording:- allowed(x)
In QINF maintained business transaction close insp complete:-allowed(x) set(x) complete inspection short term :-allowed(x) set(x) and start inv post bef Usage decision:-disallowed(x) no action (x)
this status profile is assigned to inspection type, inspection plan has been created , and mic is assigned which has indicator set required char, single value, print, LSL, Sampling Procedure.
My Problem is when record inspection result and closed it.and go to for usage decision system doen not allow me to do UD ,
mv -
How , When and What is the significance of Business Partner's Sales Area Data?
Dear All,
What is the Sales Area data of busines partner , What is the significance of the same?
When it gets modified or extended?
How to maintain its configuration? How maintain its data!!
Hence i want to understand almost all about sales Area data of business partner.
Regards,
Dhruvin
Moderated: Please use the search before posting.
Message was edited by: Andrei VishnevskyHello Dhruvin,
I think you shall have a look on the current help about this issue as it is a Complex ssue meaning "extense" and also one of the basic Points on the customizing and deployment of a CRM System:
Organizational Management in SAP CRM - SAP Library
Basically the Sales Area Data identifies your BP in your Sales Organization.
You define your sales organization so its fits your business requirements and real structure. f
Having this information properly defined helps to link data between SD and CRM so you can have for example: - The proper price for a customer when creating and Oportunity/ Sales Order.
- To restrict the access of the information of an employee.
Hope these hints help..
Regards -
What is the difference between generate partner profile and creat partner
What is the difference between generate partner profile and creat partner profile ?
Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
Generation of Partner Profiles
The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
ORDERS
ORDCHG
ZINVRV
ORDRSP
INVOIC
FIDCMT
The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
generate partner profiles tcode BD82
creating partner profiles tcode WE20
 There are two methods for maintaining the partner profile:
 Maintain partner profile manually:
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
 Generate partner profile:
Prerequisite: The current distribution model is distributed to all participating systems.
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
Regards
Vasu -
What is the purpose of Defining a requirement in the procedure?
Hi
I have a query related to the Output type .
What is the purpose of Defining a requirement in the procedure?
And where shall we code for a new requirement and also what shall we code in it?
Thanks<b>Requirement Use</b>
If the requirement is fulfilled (SY-SUBRC = 0), then output determination also takes into consideration output type or the access sequence, for which the requirement has been specified.
<u><b>Output determination:</b></u>
An object that checks whether the application data (for example, data determined in Customizing) corresponds to the condition records.
If this is the case, one or several messages are "found," which can then be processed (for example, sent electronically).
The condition records are searched for according to a predefined hierarchy in message determination.
After defining a new requirement no say 604 for billing pricing procedure and activating it, the standard sap system creates a routine with the no: 604 specifically for billing. So the name of the program automatically created by SAP will have the naming convention something like RV64A604. then you need an access key to go to the change mode for writing any logic. Then just put a break-point and then execute VF01 or VF04, then the cursor position directly goes into this routine, where the pricing structures KOMK and KOMP have the visibility. So based on the values flowing inside this structures, you can probably code that suites the business requirements.
there are some useful transactions like VOFM for maintaining the requirements and formulaes for a pricing procedure.
For viewing the requirements in the procedure you can also go to V/08 transaction.
Lakshminarayanan
P.S. Reward points for all helpful answers. -
How to put Guage Meters in Visula composer & what is the significance
Hi ALL,
I am new to VC . So I want to Know what is the significance of Gauge meters & How we have to put in Iview .
Please provide me steps to use Gauge meter.
Reward the points
Thanks&Regard,
kiran.Hi Kiran,
Refer the following link.It ll be useful
<a href="/people/abesh.bhattacharjee/blog/2007/02/27/get-started-with-dynamic-graphics-in-xmii-115">/people/abesh.bhattacharjee/blog/2007/02/27/get-started-with-dynamic-graphics-in-xmii-115</a>
<a href="Regarding dynamic graphics://Regarding dynamic graphics
Regards,
Hemalatha
/Assign points if helpful/ -
Distribution function - What is the significance of "USER" field in Distribution template?
Hi,
I am working with the distribution functionality in BPC 10.
Here i am saving the reports in a folder on my desktop. For this we need to create a template which includes multiple report names, fixed members and variable members.
In the variable member section, we have a field for User.
For this field
1. when i do not specify anything it does not let me distribute,
2. when i specify a user name it creates 2 folderrs on my dektop one with the template name and one for the user
3. when i specify a space (" ") this creates only 1 folder during the distribution that is of the Template name (Which is what is required)
However what i do not understand is how this works without a username? What is the significance of this field in the distribution template?
Thanks in advance,
ShwetaHi Ram,
I have used this field for, what is the effect of the breakdown or problem when users are creating the notification. Example are given below. The same filed will come in IW28 report for analysis purpose.
1 No Effect
2 Production Restricted
3 Production Breakdown
Hope it will help you to understand.
Best Regards
Kalyan -
What is the significance of LOCK INDICATOR in IT0006?
Hi all,
has anyone used lock indicator in IT0006? for what requirement is it used? what is its significance?
what r the implications? does it used for any specific HR process? Where else do we find lock indicators in HR master data?
thanks in advance...points will be duly awarded .The Lock indicator will make the record not available even though it will be stored in the database table.
This is useful when you need to validate data before it is available in system.
For e.g. In ESS you may allow Family / Dependent data to be entered by employee. Some companies need proof of relationship before they allow Family data to be stored in the system. In this scenario, the Family / Dependent record can be in Locked mode till the employee provides the relevant proof of relation. On getting the proof, HR can unlock the record to be available in the system.
Hope this explanation helps you.
Cheers!!!!!!
Sanjay Sharma -
What is the significance of the Assembly Deployment Target and Feature Scope?
Hello,
We have created a project as Farm Solution (not sandbox).
Under project properties we can see an option for Assembly Deployment Target : GAC or WebApplication.
I know that GAC will deploy the dll to windows\assemblies and WebApplication will deploy to website/bin folder.
Now, we add a feature to the project; in here we can see a dropdown for scope with options as: Farm; Web; Site; WebApplication. I know that depending upon what option is chosen; the feature can then be activated by going to the respective manage features
option via SharePoint front end UI.
Can you tell me what is the significance of the Assembly Deployment Target and Feature Scope?>>Can you tell me what is the significance of the Assembly Deployment Target and Feature Scope?
Feature scope can be decided based on the type of artifacts you will be building
Check the below link for what type of artifacts can be build at different levels of scopes
http://msdn.microsoft.com/en-us/library/ms454835(v=office.14).aspx
wrt to Assembly Deployment Target depends on what type of components you are deploying through your solution which will be specified in manifest.xml. There are advantages
if you deploy the components to web application rather GAC like all Apppools will not get recycled, avoiding IIS reset etc. But if you have 3rd party dlls and feature receivers which need to deployed along with the solution then its advisable to deploy to
GAC
http://trentacular.com/2009/06/sharepoint-differences-between-global-and-web-application-targeted-solution-deployment/
https://www.captechconsulting.com/blog/james-brocato/sharepoint-without-the-gac
Hope this helps.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
Maybe you are looking for
-
How to find database attribute names that correspond to page labels
I've been tasked with creating one or more views to be used in creating reports. The users know data items by the labels on pages, not the database attribute names. So my dilemma is how to correlate the page labels to the database attributes. For exa
-
How i can download after effects CS6 from Creative Cloud?
How i can download After Effects CS6 from Creative Cloud?
-
Checkbox type field appears unchecked in Production
Hello, I have to modify an application in crm portal, but I don´t not know what might be happening, because in DEV is sure and PRD the checkbox is unchecked. How can I do to customize this field to always be marked when starting an application? Thank
-
Bridge Slide Show Blank White screen (NEW)
I get a blank white screen when I hit Apple L.(same when I go to VIEW click slide show) I have reinstalled CS3 3 times. Upgraded driver for Video card. Very thing else works OK. this is driving me crazy. I am using a G 5 Pro,operating system 10.5, 5
-
Where can I find the Java wireless tutorial?
hi all, where can I find the Java wireless tutorial? regards, Elvis