What is the Significance of Late Days in Cycle Counting
Hi All,
I would appreciate if you could someone please let me know the significance of "Late Days" under Scope and Control tab in cycle counts form while defining.
We are using 12.1.3 version.
Regards,
John
Late Days tells when a scheduled count should be considered late.
So if you make late days = 5 and if you schedule a cycle count today. After 5 days, it will be considered late.
AFAIK, this field is not used in Oracle. But you can use it in reports.
Sandeep Gandhi
Similar Messages
-
[SOLVED] What's the significance of 14871 (in /etc/shadow)?
In the /etc/shadow shipped with the filesystem package, we have lines like this:
systemd-resolve:x:14871::::::
where the third field is always set to 14871, which is " the date of last password change, expressed as the number of days since Jan 1, 1970."
$ date -d '1970-01-01 +14871 days' -u
Sun Sep 19 00:00:00 UTC 2010
...so what's the significance of this day?
Last edited by lolilolicon (2014-06-28 12:38:05)<kicks lolilolicon's jaw under the bed while whistling innocently>
Please remember to mark the thread as solved https://bbs.archlinux.org/viewtopic.php?id=130309 -
What are the Calculations of Compression days in MRP?
Hi,
Can anyone please explain me with example that what are the calculations for compression days calculated for planned orders?? I am using MRP planning.
Thanks and Regards
FarhanHI,
compression days are the days by which lead time of your buy items gets compressed to fulfill the demand due dates.
For ex, Finished Good is having Due date ( as scheduled ship date/request date in SO) on 15th of Feb, but the buy item used in this assembly has lead time of 20 days.
Consider the plan is running today i.e. on 6th Feb, so buy item will be actually available on 6+20=26th of Feb,
But your demand due date is 15th Feb, which needs to be met, so planning engine will suggest an exception for this buy item as 'Item with compression days'
by compressing its lead time as 26th Feb-15th Feb=11days as compression days.
Please mark this post as correct or helpful it serves your purpose.
Thanks,
Avinash -
How to put Guage Meters in Visula composer & what is the significance
Hi ALL,
I am new to VC . So I want to Know what is the significance of Gauge meters & How we have to put in Iview .
Please provide me steps to use Gauge meter.
Reward the points
Thanks&Regard,
kiran.Hi Kiran,
Refer the following link.It ll be useful
<a href="/people/abesh.bhattacharjee/blog/2007/02/27/get-started-with-dynamic-graphics-in-xmii-115">/people/abesh.bhattacharjee/blog/2007/02/27/get-started-with-dynamic-graphics-in-xmii-115</a>
<a href="Regarding dynamic graphics://Regarding dynamic graphics
Regards,
Hemalatha
/Assign points if helpful/ -
Distribution function - What is the significance of "USER" field in Distribution template?
Hi,
I am working with the distribution functionality in BPC 10.
Here i am saving the reports in a folder on my desktop. For this we need to create a template which includes multiple report names, fixed members and variable members.
In the variable member section, we have a field for User.
For this field
1. when i do not specify anything it does not let me distribute,
2. when i specify a user name it creates 2 folderrs on my dektop one with the template name and one for the user
3. when i specify a space (" ") this creates only 1 folder during the distribution that is of the Template name (Which is what is required)
However what i do not understand is how this works without a username? What is the significance of this field in the distribution template?
Thanks in advance,
ShwetaHi Ram,
I have used this field for, what is the effect of the breakdown or problem when users are creating the notification. Example are given below. The same filed will come in IW28 report for analysis purpose.
1 No Effect
2 Production Restricted
3 Production Breakdown
Hope it will help you to understand.
Best Regards
Kalyan -
What is the significance of the Assembly Deployment Target and Feature Scope?
Hello,
We have created a project as Farm Solution (not sandbox).
Under project properties we can see an option for Assembly Deployment Target : GAC or WebApplication.
I know that GAC will deploy the dll to windows\assemblies and WebApplication will deploy to website/bin folder.
Now, we add a feature to the project; in here we can see a dropdown for scope with options as: Farm; Web; Site; WebApplication. I know that depending upon what option is chosen; the feature can then be activated by going to the respective manage features
option via SharePoint front end UI.
Can you tell me what is the significance of the Assembly Deployment Target and Feature Scope?>>Can you tell me what is the significance of the Assembly Deployment Target and Feature Scope?
Feature scope can be decided based on the type of artifacts you will be building
Check the below link for what type of artifacts can be build at different levels of scopes
http://msdn.microsoft.com/en-us/library/ms454835(v=office.14).aspx
wrt to Assembly Deployment Target depends on what type of components you are deploying through your solution which will be specified in manifest.xml. There are advantages
if you deploy the components to web application rather GAC like all Apppools will not get recycled, avoiding IIS reset etc. But if you have 3rd party dlls and feature receivers which need to deployed along with the solution then its advisable to deploy to
GAC
http://trentacular.com/2009/06/sharepoint-differences-between-global-and-web-application-targeted-solution-deployment/
https://www.captechconsulting.com/blog/james-brocato/sharepoint-without-the-gac
Hope this helps.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
What is the significance of this setting..?
Dear All,
Can you please tell me what is the significance of the following settings in the Availability check configuration.
IMG - SD - Basic Functions - Availability check & TOR - Availability check - Availability check with ATP Logic or Against planning - Define default settings.
Here we maintain availability check rule for each Sales area. In our system for some sales areas it is maintained as C and for some B and rest blank.
Your help is solicited.
Regards,
VishiHi Vishi,
Here is the details of availability check rule in default setting from SAP F4 help....
Blank Dialog box in the case of shortages (batch/BAPI full dlv.)
A One-time delivery
B Full delivery
C Delivery proposal
D Dialog box in the case of shrtages (batch/BAPI one-time dlv)
E Dialog box in the case of shortages (batch/BAPI dlv. prpsl)
1 Delivery proposal for product selection
I guess this is self explanatory...... if you have further doubt revert back....
Thanks,
Raja -
What is the significance of super() in constructor?
excuse me, my english is poor.
public class App2 extends App1{
App2(String str){
//there is a crytic super() *****why?****
System.out.println(str);
public static void main(String args[]){
App2 tt=new App2("hello");
class App1{
App1(){
System.out.println("App1 constructor");
//end progarm
why there is a crytic super()?
What is the significance of super() in constructor?"public class App2 extends App1"
implies that App2 inherits something from App1.
e.g.
App1 has member data a1, b1, c1 and App2 add its own member data a2, b2, c2. Since App2 extends App1, now App2 has member data a1, b1, c1, a2, b2, c2.
If you call App2's constructor, you can initialize a2, b2, c2. How about a1, b1, c1? If you don't use super in App2's constructor, a1 b1 c1 won't be initialized. So, call super to let App1 initialize a1, b1 and c1. -
What is the significance of having Ver 1 and Ver 2 in a Bal Sheet?
Hi,
1. What is the significance of having Version 1 and Version 2 in a Balance Sheet(Income Statement)?
Any real life significance of these versions?
2. I had a previous question which was not answered, can verify if having version 1 and version 2 in a query addresses that problem:
u201C Is there a way to compare two different income statements (or two Bal Sheets) for say, Year 2005, if Income statement 1 is from R3 but Income statement 2 is from a non-sap system. i.e. to create a variance for them as a means of reconciliation? u201C
If Version 1 and Version 2 in a balance sheet does not deal with this, can you help with it?
ThanksHi,
thanks for the response.
Does this versioning process also takes place in Balance Sheet or it is something done only for Income Statements?
Is this the reason why some queries have varaibles to enter Version 1 and Version 2?
If Version 1 and Version 2 are from the same datasource, and you bring all into a DSO, what will be the advantage to separate the Version 1 and Version 2 data different cubes?
To help me get your response well, is the Versioning concept used in addressing the other part of my question:
i.e. if having version 1 and version 2 in a query addresses that problem:
u201C Is there a way to compare two different income statements (or two Bal Sheets) for say, Year 2005, if Income statement 1 is from R3 but Income statement 2 is from a non-sap system. i.e. to create a variance for them as a means of reconciliation? u201C
If Version 1 and Version 2 in a balance sheet does not deal with this, how do you address this?
Thanks -
What is the significance of plan version?
Hi all,
Pls tell what is the significance of plan version? What will happen if I create some orgunit oin current plan and some org unit in another plan?Hi..,
Plan versions are scenarios in which you can create organizational plans.
==>In the plan version which you have flagged as the active plan version, you create your current valid organizational plan. This is also the integration plan version which will be used if integration with Personnel Administration is active.
==>You use additional plan versions to create additional organizational plans as planning scenarios.
But Only one plan version will be active at any time !!!
As a rule, a plan version contains one organizational structure, that is, one root organizational unit. It is, however, possible to create more than one root organizational unit, that is more than one organizational structure in a plan version.
For more information on creating plan versions, see the Implementation Guide (IMG), under Personnel Management ® Global Settings in Personnel Management ® Plan Version Maintenance.
regards,
sai ramesh -
What is the significance of datatags application?
Does it matter if datatags application is up or down within your OC4J? This application is in every OC4J you create.
Not sure what is the significance/use or impact of this application if its up or down.This is duplicate
-
What is the significance of badi BBP_Create_PO_Back?
Hi Friends
what is the significance of badi BBP_Create_PO_Back.?
Thanks & Regards
Kanni.
Edited by: Kanni. on Jun 21, 2009 10:41 AMHello,
BBP_CREATE_PO_BACK was used to pass additional data from SC to ECC PO.
This BADI is replaced by BBP_CREATE_BE_PO_NEW with SRM 5.0. Using this BADI you can change all the data that is transferred to the backend system for generation of a purchase order. This includes, for example, the item data, the account assignment data, and texts. All the shopping cart data is available as input parameters.
Hope this helps.
Thanks
Ashutosh -
What is the significance of Marker interface? Why are we using, even though
What is the significance of Marker interface? Why are we using, even though it has no method?
Well, what's the significance of an interface? They can define a set of methods a class may implement but the class could equally well implement these methods without the interface so why having interfaces at all?
The answer is that the most important aspect of an interface is that it constitutes a type (you can declare variables of it). And it's a type regardless of how many methods it defines, including none. So the reason for having a marker interface is that you're interested solely in the type aspect of interfaces. -
What's the significance of the letter -p in the JRE installables
Hi,
Can anybody please let me know what is the significance of the letter "-p" in the JRE installables as i could see that till JRE 1.6.0_13 the name for the Window offline installable has -p {for eg: jre-6u12-windows-i586-p.exe} where as for the higher version i.e 1.6.0_14 onwards there is no letter "-p" {for eg: jre-6u14-windows-i586.exe} .
Appreciate your quick response in this regards.qm control is only useful for procured materials
it
Manage quality-related information for materials, vendors, and manufacturers in quality info records
Monitor the QM systems of vendors and manufacturers
Supply quality documents with requests for quotations and purchase orders
Certify vendors or manufacturers that have QM systems implemented, to reduce the inspection requirement
Request that quality certificates be submitted with the delivered goods and monitor the receipt of these certificates
Inspect vendor goods at vendor sites (source inspections)
Block the payment of invoices until the goods have been inspected and accepted
U can use qm control key depending upon ur requirement -
what is the maximum number of days a movie is available for watch if taken on rent on apple Tv, and for how many times i can watch a movie if taken on rent?
About renting movies from the iTunes Store - Apple Support
Maybe you are looking for
-
Can't get iPod to sync with iTunes
I managed to back-up all my music from my ipod onto my harddrive and upload it into iTunes. Now I have the problem of syncing iTunes with my iPod! I have Windows 8 a 5th Gen Nano that is at least 4 years old. I can plug my ipod into the computer and
-
How to create a PS file out of Freehand MX?
I am new to these forums, and wonder if anyone can help clarify a question: How to create a PS file with fonts embedded, out of Freehand MX? I am very late in making the transition to OSX /Freehand MX / CS1 (better late than never). Up until recently
-
How do you make clips go in slowmotion and play reversed using imovie 08
how do you make clips go in slowmotion and play reversed using imovie 08
-
Import and Copy files automatically
Several years back I lost several photos using iPhoto because while it imported the image, the files copied into the iPhoto library were corrupted during the import process. To prevent that from happening to me again I wrote an applescript that would
-
How transfer songs from PC to iphone
how to transfer songs from PC to Iphone 4