What is the sim network unlock pin for when you replace your old sim card?
Hi, so I've just put my new Dan and Phil sim card into my phone but its asking for a sim network unlock pin, what is it?? Thanks
Hi,
It means your phone is network locked to another carrier. To use this sim your phone needs to be on EE, unlocked or sim free.
If you want the code to unlock your phone you will need to contact the carrier which issued the phone but as with EE there maybe come conditions you need to comply with before this will be done and a fee to pay.
Hope this helps.
Similar Messages
-
I'd like to know how to get the SIM Network Unlock PIN for my DROID2 GLOBAL
I am living in Haiti and I made someone buy a Droid2 Global for me in USA. I have had the phone for 2 months but I never could operate it. Any time I open it, it requires that I enter a SIM Network Unlock PIN that I have not.
I' d appreciate you help me get the SIM Network Unlock PIN for my Droid2 Global which IMEI is the following: {edited for privacy}.
Many thanks in advanceLatachaM_VZW wrote:
If the incorrect PIN code is entered too many times, a PIN Unlock Key must be obtained from Verizon Wireless at 908-559-4899 if you are outside of the United States and 800-922-0204 or *611(send) from your mobile number inside the United States..
The SIM PIN option is only available when the handset is in GSM / UMTS mode. Refer to Network Mode Setting for further assistance.
Thank you, LatachaM_VZW
Are you talking about the PUK code (when the PIN for the SIM has been wrong too many times)? The OP is talking about network unlock, and is using a foreign SIM. Global Services certainly wouldn't have the unlock code for a SIM that isn't theirs.
I have heard that if you do enter the incorrect network unlock code too many times, the phone becomes permanently locked (i..e cannot be unlocked even with a valid unlock code) but not everyone agrees that this is true for all phones.
Jax's post above really says it all, you will need to search the web for a service that will unlock this Motorola phone. In doing so, you might find a number of threads that say the Global has to be activated in the US before an unlock code will work. Others were able to unlock without this. -
SIM network unlock PIN for my droid pro
I am traveling abroad and insert local SIM card in droid pro,it asks me to input "SIM network unlock PIN" to use the local service.How do I do then?Thanks.
Thanks for the reply Ann154
Hello Cowboy0086
Yes, you would need to contact our global support team prior to using the device abroad. Their number is 908-559-4899
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport -
Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?
I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people. -
Sim Network Unlock PIN used all the codes
Hello guys I have received a new full box xperia z2 and the phone is blocked on network EE.I went to some stores to unlock the phone but they told me that all the codes was used and I can't unlock anymore the phone.What I can do ?? There is a solution for this problem?Thank you
When I have checked the status using *#*#7378423#*#*
[] Network 0
[] Network subset 0
[] Service provider 0
[] Corporate 0
[] SIM 0Contact your local Xperia Care
http://support.sonymobile.com/global-en/contactUs/
I think @Rickard posted something that they "might" be able to reset it.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
What is the idea of having STRING type when you can't write into that field
Hello friends
I am desperately trying to write to a field of a database table with DATA TYPE 'STRING'.
When I try to write it using a program from < SE38> or a function <SE37>, I get following error message, while activating the program.
============================================================
<DATABASE_TABLE> must be a flat structure. You cannot use internal tables,
strings, references, or structures as components.
============================================================
So, I have been going in circle to find out how to write a string into this field.
I can't use the CHAR or any such type with a limited field length, since the requirement from my customer is to use a variable length string.
Has anybody seen this problem before and if you have resolved this issue, I would appreciate if you can please let me know.
Thanks a lot in advance.
RamHi Harish
Thanks for your response.
I can create the table with the data type 'String'. However, the problem is when I try to update the table from a program in SE38 or a Function Module in SE37.
When I try to activate the PROGRAM or FUCNTION, I GET A MESSAGE THAT I MENTIONED EARLIER.
Here is the simple program that I have created that I am not able to activate
==========================================
REPORT ZTEST_STRING1.
tables: ztest.
ztest-zid = 2.
ztest-zstring1 = 'ABC'.
insert ztest.
===========================================
ztest has two fields
zid which is NUMC type
and zstring1 which is STRING type.
When I try to activate I get an error message as follows:
'ztest' must be a flat structure. You cannot use internal tables,
strings, references, or structures as components.
Edited by: Ram Prasad on Mar 20, 2008 6:08 PM -
i don't care if my macbook is a little thicker as long as i don't need to burden myself of an external optical drive just for a simple and common task of watching/listening to discs.
the hippie wrote:
i don't care if my macbook is a little thicker as long as i don't need to burden myself of an external optical drive just for a simple and common task of watching/listening to discs.
I'm confused, why did you choose to buy the retina model if you don't like it? This is exactly why Apple still manufacture/sell the 'old' style MBP which is thicker and has an optical drive built-in! -
What is the network unlock code for my HTC Thunderbolt?
I want to unlock my husband and I's HTC Thunderbolts. Our contract is up and we bought our phones out right before we signed a contract. What is the network unlock code for the HTC Thunderbolt phones?
Thanks. Apparently Verizon isn't really "sorry to see the customer go". I'll simply buy an unlocked phone and be done with Verizon for good. Two years is to long to be treated like this by them. I bought my phone and should be able to use it with whatever carrier I want. It is no longer Verizon's phone. Yes I understand they own some of the stuff they put on my phone but by all means they can remove it. I didn't want their crap on their in the first place. I wish the rest of America would quick kissing their rear. End Rant
>>Edited to remove profanity<<
Message was edited by: Verizon Moderator -
hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india
Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.
-
How do I unlock an iphone 5 with Sprint 15.1 at IOS 7.0.6 IMEI 99 000320 012095 0 .
The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?There is no such thing as an unlock code. Sprint may have processed the unlock, and then requested you restore the iPhone using iTunes to complete it. But that's it. There is no code to enter, and nowhere to enter it any way.
iPhone: About unlocking -
iTunes is unable to run. I tried to run iTunes and a message comes up that says "the iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file." what is the solution to unlock it ?!
I have tried both suggestions, unfortunately neither fixed this for me. Hoping there's another possible fix. Thanks in advance.
Empty/corrupt iTunes library after upgrade/crash and/or Repair security permissions for iTunes for Windows. -
What is the difference between unlocked and contract free
hello
i want to know what is the difference between unlocked iphone and contract free iphon?Unlocked means that you can use any sim card in the phone all the time and keep swapping and the phone will still work. You will pay full price for the phone.
Contract actually means that you will buy the phone for the full price, but the phone will then become locked to the first carrier whos sim card you insert into the phone and if you want to use another sim card, you'll need to get the phone unlocked from that carrier.
If you want an unlocked phone, then buy an unlocked phone and not a contract free phone - if you pay full price for the phone it's a no brainer to buy anything less. -
What is the best home set up for a family to share/use apple products
Hi, I am relatively new to apple (have an iPad) and having been a PC user for years I was pleasantly surprised with the apple experience and am now trying to work out the best set up for me, my husband and young son as I am buying them both of them apple products this Christmas. New Mac laptop/ ipad for hubby and then an ipod touch for my son oh and a new mac laptop for me. We are also thinking of moving from Blackberries to iPhones. Yes we seem to be hooked! but i am unsure about the home family set up and how to replace my PC network that I run off an 8TB server.
In reading the forums I keep seeing people talk about problems they have with two apple IDs and trying to merge them. I have also heard about a family ID allowing us to share apps legally. I am really nervous of setting us up wrong and then having problems later and hence i am now looking for some advice on how to share as much as we can legally but also make usage practical and not invading each others privacy. thoughts so far:
Music - I think we are happy to share the same music and access using one ID (we currently don't buy much music from apple but have lots of CDs we share).
Photos - It would be nice to share photos - as long as my son or husband cannot accidentally delete photos of mine (which is my biggest concern). I currently load all camera photos onto my 8TB storage box as the network owner and my husband has full access to copy any photo to his laptop but can never delete the original copies by accident.
Apps - If possible i would like us to share these but they are cheap enough these days to separate if really needed. Would be good to share licence for pages etc though
cloud, contacts, facetime, email - this is what is making me consider separate IDs or learning how to have multiple users in one apple ID - I do not want to have to share synced contacts with my husband. I have near 300 contacts now through work etc and he will not want them plus i will not want his or him being able to delete mine by mistake. and then for email and facetime, well I want to give him his privacy so I do not receive his messages etc. especially now that we are considering switching to iPhones
Then last but not least, i don't know the best solution for my son. he is only 7 years old so even though I don't want to pay for things again I don't want him being able to download "just any" app from the purchased icon in Appstore. Also, is there a child friendly setting to prevent him from viewing inappropriate content on the internet?
Appreciate I have asked a lot of questions here but I am looking for any genuine advice out there. Thank you in advance to any potential advisers.Welcome to the Apple Community.
You don't need to use the same ID on a device for iCloud and iTunes.
iCloud covers mail, contacts, calendars, reminders, notes, bookmarks, photostream, document syncing etc and for these I recommend you each have your own ID's, this will stop others from having access to and likely more importantly being able to edit or even delete your personal information.
Someone of Age needs to be responsible for an account, so for younger children you will need to create and be responsible for an account yourself but let the child use it.
For iTunes you could use a single account so everyone can share music and apps or you could use separate accounts (there are ways to share content between users, Apple provides homesharing to do this).
When choosing how to proceed with iTunes, it might be worth remembering that someday your children will reach 21 (or whatever age they feel they have become independent) and will likely want their own account, changing accounts later may make it difficult to access previous content.
Photostream now has shared albums, so you can share just what you want with others. Shared photos using shared albums cannot be deleted by others with different accounts, but if you all shared the same account they could be.
Facetime and messages can also use an ID independently of each other, iCloud and iTunes. Separate ID's are recommended for these, joint accounts can be problematic.
iTunes has parental controls for youngsters, however at 7, I suggest you don't reveal the password to him and enter it yourself when he needs to purchase something, otherwise you may receive unexpected bills. -
I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?
I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled. -
What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601
Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)
Maybe you are looking for
-
I keep getting an error can someone please help
i am trying to develop a web application using tomcat. i have a servlet that will not compile because of two things. firstly, it says that package beans does not exist and secondle it gives an error becuase im using a user bean here to set some attri
-
Difference between VAT AND EXCISE DUTIES
HI ginius can any body give the difference between vat and excise duties
-
Can't save emailed photos to iPhoto
The computer is an iBook G3, 900 MHz, 40 GB hard drive running OS X v.10.4.11 with Mail 2 and iPhoto 2. This is a computer which I am trying to set up for a friend. I recently posted a similar question in the iPhoto forum thinking the problem might b
-
Yamaha KX61 USb MIDI keyboard doesn't work in Garage Band
I have installed latest Yamaha USB-MIDI driver V1.2.0 for Yamaha KX61. I have connected USB cable to Mac Mini and turned the keyboard on. In Other section of System Preferences I can see an icon for Yamaha USB-MIDI. In there I can see Device Name: Ya
-
Passing properties to mediator service from soap - ui
Hi, I have a composite A which has a mediator component A1 in it. This mediator will be called by some external BPEL/OSB service. Whenever i see an instance of the mediator i see certain properties / headers in the input payload to the mediator. Thes