What is the size difference between iPod nano 1st gen vs 5th gen?

I'm trying to buy an armband for my 1st generation iPod nano to use at the gym and every one I find on Amazon says its for 5th generation. Is it the same size? Will my iPod fit?
If not, can you please suggest me an inexpensive, but good armband to use. Thank you!

Hi Addicbaddic,
Here is a link to the Apple page that shows all of the iPod Nano generations. You will be able to see which one is yours and compare it to the 5th gen....
http://www.apple.com/support/ipod/
Cheers,
GB

Similar Messages

  • What are the main differences between iPod Touch 2G and 3G?

    I'm thinking about getting one but what are the main differences?

    http://discussions.apple.com/click.jspa?searchID=-1&messageID=10241668
    among other threads here. Cheers.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • What are the functional differences between the iPhone and the iPod Touch, barring of course the differences in service requirements.

    What are the functional differences between the iPhone and the iPod Touch, barring of course the differences in service requirements.

    For one, their form factors are slightly different as the iPhone has a bit more squarish body whereas the iPod Touch has a tapered back to it. 
    The iPhone also has much better front and rear cameras. Exact details as to the difference in megapixels depends on whether or not you talking about the iPhone 4 or 4S.  If you would like to get more details, you can always view
    each models specs on Apple's online store.
    See here for a better explanation.
    http://en.wikipedia.org/wiki/IPod_Touch#Comparison_to_the_iPhone
    I'm sure others will chime in with other things as well.
    B-rock

  • What are the major differences between the air and the pro

    what are the major differences between the air and the pro?

    In a nutshell, the Air is a lightened, more compact system than the 13" Pro counterpart. The Air loses some hardware features to accommodate the physical downsizing.
    No FireWire port
    No built-in optical drive
    A lesser performing CPU to retain battery charge life, and adequate cooling.
    No Ethernet port
    No Kensington lock slot
    The Air does have a superior native resolution at 1440 x 900, and a standard SSD that does make up alot of the speed differential, and then some. Of course, the 13" Pro can be optionally configured with an SSD.
    You buy the Air if the physical size an weight savings are demonstrably more important than the features lost.

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • What are the major differences between a Access Switch and Aggregation Switch w.r.t Carrier Ethernet domain?

    In a Carrier Ethernet domain,Could someone please help me understand what's the basic difference between Access Switch and Aggregation Switch both in terms of s/w and h/w functionalities. MEF deals OAM,CFM, EVC provisioning only at the access edge switches. Do we need to repeat all these at the aggregation level? or  is it just used for routing purpose? Do we have a separate Fault Management at the aggregation level?

    Duplicate posts.  :P
    Go here:  https://supportforums.cisco.com/discussion/12137156/what-are-major-differences-between-access-switch-and-aggregation-switch-wrt

  • What are the major differences between the 4.7 and ECC5 or 6   ?

    Hi Abapers,
                            Can anyb one answer this question ....
    what are the major differences between the 4.7 and ECC5 or 6    ?
    Thank's,
    Siri

    Tan,
    we have solution for this question on previous pages.

  • What are the major differences between BODS and Talend ?

    Hi Friends,
    We had a client meeting 2 days back regarding BODS project, But our client is showing more interest on Talend. We have explained/demo him on BODS.  Could any one please tell me, What are the major differences between BODS and Talend ? What are the features of BODS which are not there in TELEND ?
    Thanks,
    Bheem.

    Hi,
    If you talk difference than Talend is an open source. SAP DS as huge advantage when it comes to loading data into SAP and it is more flexible with lots of inbuilt features and easy to load data into SAP using DS directly and extracting data from various legacy systems.

  • What are the major differences between oracle 10g and oracle express 10g

    Hi
    Can anyone tell, What are the major differences between[b] oracle 10g and oracle express 10g.
    Or if you know any URL, then please do let me know.
    Advance Thanks
    JC

    Dear sir,
    here it is.
    http://www.oracle.com/database/product_editions.html

  • What are the major differences between 4.7 and ecc5.0

    hi all
    What are the major differences between 4.7 and ecc5.0
    regards
    JK Rao

    Hi,
    Good morning and greetings,
    Please use the following link
    http://solutionbrowser.erp.sap.fmpmedia.com
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • What is the main difference between ws_upload and gui_upload?

    Hi All,
    What is the main difference between ws_upload and gui_upload?
    In what contexts should we use these two function modules??
    Thanks,
    Creasy

    search the forum before posting.
    You can find lot of posts related.

  • What is the exact difference between Purchse order and purchase requisition

    Hi all,
    What is the exact difference between Purchse order and purchase requisition.
    Thx

    Hi,
    <b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
    Related Table EBAN
    Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
    Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
    <b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
    Tables:EKKO,EKPO
    Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
    MB01
    Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
    Vendor, Material ,Qty are mandatory for PO.
    Regards,
    Padmam.

  • What are the main differences between the iPad &MacBook Air?

    What are the primary differences between the iPad & the MacBook Air?

    iPad runs iOS and has a touch screen.
    MBA runs OSX and uses a mouse or trackpad for input.
    Totally different files systems.

  • What are the main differences between  3 three important class types

    PP members
    What are the main differences between class type 300(variants) , class type 200 (configurable objects) & 001 ( material class)
    Please elucidate on the above
    Thanks
    Suren R

    Hi,
    The class type is a central concept in the classification system. The class type determines how classes are processed, and how objects can be classified and retrieved in these classes. In Customizing for Classification, you define the settings for a class type. You define class types for a specific object type, such as materials. You can then use classes of this class type to classify objects of this object type.
    When you first create a class, you must enter a class type for the class. Each class type is a closed system. There is no link between the different class types.
    he class type determines the following:
    Which object types you can assign to a class
    Which class maintenance functions you can process
    Whether you can classify objects in more than one class
    Which class statuses, organizational areas, and text types are supported in class maintenance functions
    Whether you can use engineering change management for classification
    Which filter functions you can use to restrict the search result
    All materials can be classified with class type 001. Class type 300 is for variant configuration the variants under a class item are called as variants and can be picked during sales order creation. Class type 200 is for classes that are used as class items in bills of material. You can classify the same materials separately in these class types.
    This is basically used to differentiate the BOM class items.
    Prakash

  • What are the practical differences betweens infopackages and process chains

    Hi,
    what are the practical differences betweens infopackages and process chains.
    Thanks,
    cheta.

    Hello BW,
    Hope the following links will give u a clear idea about process chains
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
    Business Intelligence Old Forum (Read Only Archive)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    regards,
    Muralidhar Prasad.C

Maybe you are looking for

  • Threshold Value in Sales Order Processing

    Dear All, I have a question for which I need inputs and suggestions from you. We have a requirement in the returns processing to do check on the value of goods being returned and if this value goes beyond a certain threshold (pre-agreed value with th

  • How to do internationalization with Sun Java Studio Creator?

    Hi everybody, the Sun Java Studio Creator seems to be a great peace of software ;-) Currently I'm trying to design some forms for a hello-world-test-project. My question now is: how can I realize internationalization with property-bundles? I already

  • OPINION WANTED: Why can't Sun make the setBounds more meaningful?

    Hi, I am wondering why Sun doesn't add some brains to the setBounds method. I bring this up because of my current situation. I have two panels, A & B. A is added to B, and A can be dragged around "on top" of B. But I can not allow the user to drag A

  • Start Multi-VideoChat Conference with a G4 & Shareware "PowerBoost"

    First I was suspicous about the PR-Text for the Shareware POWERBOOST. But I tested the little gismo, that allows every user with a G4 to host a MultiVideo-Chat Conference on his machine. I am located in England at the moment and with a 1MbitDown/128k

  • Generated Code for Button Bar - Not Working

    Hi all, I'm working with LightSwitch 2013 (Visual Studio 2013 Update 4), and I noticed that when I view my HTML5 client in Internet Explorer 11 and switch between tabs (in the HTML5 client), the buttons become barely visible (like they were disabled,