What is the snapshot folder in itunes used for?

trying to restore from this (the snapshot folder) as the backup folder is empty.

Hi! I have a problem deleting my burn folder! I keep moving it to trash it keeps asking me for password and it just keeps sitting there! I checked permissions all open unlocked and ready but still just sits there on my desktop cant move it cant change its name cant delete it! It's driving me crazy, I burned it again on a disk so maybe it will disappear as you suggested but no! it's still there! what am I doing wrong here!? plz help!
I deleted all the photos that were in the burn folder originally, there are 3 sub folders that wont delete either!

Similar Messages

HT1586 What's the best HDMI switcher to use for Apple TV?

What's the best HDMI switcher to use for Apple TV? My widescreen TV has only one HDMI outlet and it is in use.
Thanks,
Joanna

Anyone sold by MONOPRICE.COM are really worth buying!

What are the delta mechanisms and tables used for Lo Extraction & COPA

Hi all
what are the delta mechanisms and tables used for Lo Extraction & COPA.
please explain clealry.
Thanks & Regards,
James

James,
Please go through Roberto's weblog :
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Anyways,
As you know LO cockpit consists of different modules(MM, PP, SD, etc)
They are called appl components. Each of them have a number (eg.MM=02) and for each appl comp they might be different Data sources and for each DS they might be different tables. So, unless you be specific we cant tell a specific table for a DS.
coming to the delta mechanisms, there are " direct delta, queqed delta and serialized delta".
Copa is based on the oepration concern. it can be created on " accouting based" or "costing based".
Assign points if helpful
Kalyan

What is the best I/O to use for a MUD?

What is the best I/O to use for a MUD?
It seems that people usually show I/O examples with IOs like:
BufferedReader in = new BufferedReader(new InputStreamReader(socket.getInptuStream()));
PrintWriter out = new PrintWriter(socket.getOutputStream());
out.println("Hello World");
out.flush();
PrintStream out = new PrintStream(socket.getOutputStream());
out.println("Hello World");
out.flush();When I say 'best I/O' I mean, can you give me an I/O that'll be the best if a MUD starts getting LOTS of request and becomes rather busy?
Thanks!
-Neo-

One last question, are output streams thread safe?A stream is inherently serial in the way it data is written to it. If two threads try to write to the same stream asynchronously, the ordering of the data written will not be predictable.
For example:
One class is recieving input from a user and
reply-printing thing like "Command Successful", and
another class is recieving messages from other users,
but the PrintWriter would be originally created in the
first class and then passed as a parameter to the
second class...would this work, or should I just
redirect all command replies to that second class?If they are in the same thread, then it could work. If there are separate threads, then some higher granularity synchronization needs to be imposed, so that the second thread doesn't start writing part way through the first's output.
For example:public class NeoThreadWriter implements Runnable {
final String name;
final int delay;
final boolean synch;
NeoThreadWriter (String name, int delay, boolean synch) {
 this.name = name;
 this.delay = delay;
 this.synch = synch;
public void run () {
 if (synch) {
 new Synch().run();
 } else {
 new ASynch().run();
class Synch implements Runnable {
 public synchronized void run () {
 synchronized (System.out) {
 for (int i=0; i<6; i++) {
 System.out.println(name+":"+i);
 try {
 Thread.sleep(delay);
 } catch (InterruptedException iex) {
 iex.printStackTrace();
class ASynch implements Runnable {
 public synchronized void run () {
 for (int i=0; i<6; i++) {
 System.out.println(name+":"+i);
 try {
 Thread.sleep(delay);
 } catch (InterruptedException iex) {
 iex.printStackTrace();
public static void main (String[] args) {
 try {
 Thread threadA = new Thread (new NeoThreadWriter ("A", 40, false));
 Thread threadB = new Thread (new NeoThreadWriter ("B", 20, false));
 System.out.println("asynchronous threads");
 threadA.start();
 threadB.start();
 threadA.join();
 threadB.join();
 System.out.println("synchronized threads");
 Thread threadC = new Thread (new NeoThreadWriter ("C", 40, true));
 Thread threadD = new Thread (new NeoThreadWriter ("D", 30, true));
 threadC.start();
 threadD.start();
 threadC.join();
 threadD.join();
 System.out.println("Done");
 } catch (InterruptedException iex) {
 iex.printStackTrace();
}With asynchronous threads A and B, the output is all mixed up. With synchronized threads the ordering of the output is maintained. Note that the guard has to encompass all of the code that generates the output; simply synchronizing the println invocations wouldn't prevent the mixing.
Pete

What's the best logic reverb to use for trumpets and sax

what's the best logic reverb to use for trumpets and sax.

The lower transmit frequency limit is in there to make the device meet FCC regulations.. that is a regulation imposed of US regions and, to a lesser extent, Latin american regions that border with the US.
In addition, you'll be pleased to know that the N900 will not use certain European WiFi channels if a) the sim card is removed or b) the phone has a sim card but is OUT of 3G coverage.. again, to make the device meet FCC regulations.. (seriously.. when you go out of 3G coverage, the kernel reports it is switching from EU wifi to US wifi!!)
Let me put this into perspective..
From: http://www.nokia.com/results/Nokia_results2009Q3e.pdf
Nokia sold 3.1million handsets in the US 2009 Q3
Nokia sold 27.1million handsets in Europe during the same period.. That is 9 times as many.
The USA has its OWN firmware
and yet ALL versions of the firmware (including the UK specific one) are crippled to meet the requirements of a region that produces the lowest sales figures by a factor of 3 (Latin America produced 9.7 million units in 2009Q3)
Why the HELL are we suffering because of US restrictions..
That's like saying you can't use bluetooth because it isn't allowed on the Christmas islands.. (it is allowed.. not picking on you, Christmas Islands, but you are small!)
If the FCC wants a phone that doesn't allow broadcasts on sub 88Mhz frequences, and doesn't want certain Wifi channels to be used, the ALTER THE US FIRMWARE..
What next, BMWs have with left hand steering in the UK because the US drives on the Left?
Phillips TVs that only work on 120V because the US uses 120V..
I don't give a **** what the FCC say.. I'm not in the US and I have my own european and UK legislation to adhere to..
For a company that INSISTS on having a billion regional firmware versions, they don't appear to be able to get that right either!!! The UK version lacks UK specific restrictions such as the ability to us UK frequencies for wifi and FM transmission!!
Crazy and very very irritating

What are the adm_modresname and adm_moduseruid parameters used for?

The following parameters are in the server configuration file (unison.ini).
What are these parameters used for? 

[UTL] 
adm_modresname = FALSE 
adm_moduseruid = FALSE 

These parameters accept only the default values shown above and are not
configurable. They were not meant to appear in the documentation or in the
default unison.ini file.

Please do not attempt to change these parameters.

Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
If yes, what are the correct steps of installation ?
I am getting the errors while configuring the Java SSM.
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

What is the "Open in Timeline" command used for?

If you select a clip in the Event browsers and select the "Open in Timeline" menu command the clip opens in it's own Timeline. However, I have know idea what this is used for. I searched FCP X help for "Open in Timeline" and got no hits. I search the Internet too but only got hits warning about edits done in this Timeline will destroy the original media (ouch!, what about non destructive). Can anyone give me some help on what this command is used for or point me to somewhere that does describe this command in detail?
Thanks

Generally speaking, I'd say using compound clips in the Event Browser is not usually the best way to go, unless you are using them for video/audio sync purposes. However, they certainly can be helpful for certain workflows as long as you understand the plusses/minuses.
To create an empty compound clip, select the event and do the "Create New Compound Clip" command (command-G). An empty compound clip is a compound clip you can subsequently paste things into -- to do that, you would select the clip and do the "Open in Timeline" command. I suppose this would let you reuse a compound clip more easily across projects, if you so desire.
Compound Clips in the Event Browser are most akin to subclips in FCP7, especially if you create them using a range selection from another clip. For example, set an in and out point within a clip, then "Create New Compound Clip" (option-G). You will be prompted for a name, and then a new clip will appear in the Event Browser with that name. It will be just like any other clip except it only will give you access to the media between the in/out points you set.
Personally, I tried using this method for one project but found some drawbacks. While it lets you give unique names to (sub)clips, once in the timeline, you have no handles for the media; to get them back (e.g., remove subclip limits) you need to break apart the clip, which loses the name you might have assigned. Using compound clips also limits your ability to use match frame (shift-F) for that clip. Finally, even though it seems like a subclip, FCPX maintains no internal relationship between the subclip and the clip it was created from. So there is no master/affiliate relationship in the same sense that FCP7 had.
Now I try only using keywords; for example, you could use the keyword "subclip" or "scene" to help break apart a longer clip into shorter ones, which you can then navigate by selecting the keyword and/or setting up smart collections containing that keyword.

What's the best FM frequency to use for the Transm...

Hi all,
I'm having difficulty in getting my iPod car kit set up, so I am using my n900 for in car entertainment for the time being. Problem is that I can't seem to find a clear frequency to set the phone to use, so it doesn't keep picking up other stations whilst I am driving around.
I have just read that 87.5 is a good choice, as not many stations go that low. Problem is the n900 won't go that low, as far as I can tell.
Any suggestions?
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

The lower transmit frequency limit is in there to make the device meet FCC regulations.. that is a regulation imposed of US regions and, to a lesser extent, Latin american regions that border with the US.
In addition, you'll be pleased to know that the N900 will not use certain European WiFi channels if a) the sim card is removed or b) the phone has a sim card but is OUT of 3G coverage.. again, to make the device meet FCC regulations.. (seriously.. when you go out of 3G coverage, the kernel reports it is switching from EU wifi to US wifi!!)
Let me put this into perspective..
From: http://www.nokia.com/results/Nokia_results2009Q3e.pdf
Nokia sold 3.1million handsets in the US 2009 Q3
Nokia sold 27.1million handsets in Europe during the same period.. That is 9 times as many.
The USA has its OWN firmware
and yet ALL versions of the firmware (including the UK specific one) are crippled to meet the requirements of a region that produces the lowest sales figures by a factor of 3 (Latin America produced 9.7 million units in 2009Q3)
Why the HELL are we suffering because of US restrictions..
That's like saying you can't use bluetooth because it isn't allowed on the Christmas islands.. (it is allowed.. not picking on you, Christmas Islands, but you are small!)
If the FCC wants a phone that doesn't allow broadcasts on sub 88Mhz frequences, and doesn't want certain Wifi channels to be used, the ALTER THE US FIRMWARE..
What next, BMWs have with left hand steering in the UK because the US drives on the Left?
Phillips TVs that only work on 120V because the US uses 120V..
I don't give a **** what the FCC say.. I'm not in the US and I have my own european and UK legislation to adhere to..
For a company that INSISTS on having a billion regional firmware versions, they don't appear to be able to get that right either!!! The UK version lacks UK specific restrictions such as the ability to us UK frequencies for wifi and FM transmission!!
Crazy and very very irritating

What is the best USB extender to use for an SCXI-1600?

I have an SCXI-1600 in a SCXI-1001chasis. I'm using three 1102's and LabView 8. I want to extend the USB connection about 100 feet, has anyone tried this before?
If so, what brand USB extender are you using?

Hi
Unfortunately we have not tested which other cables might do the job. Although it is not supported, the VIGOR 1120, has been tested for up to 200 ft; this other cable: USB 2.0 Hi-Speed Cable VE280306 has not been tested with National Insturmens USB boards but it seems it can handle USB 2.0 and 1.1.
I hope it helps
Jaime Hoffiz
National Instruments
Product Expert
Digital Multimeters and LCR Meters

What is the best sound interface to use for the new Imac 27 inch

I am going to purchase teh new iMac 27 inch and I wanted to know what is the best soundinterface to buy with a price range up to 300 -700 dollars

Check out the M-Audio website, as well as Amazon for better pricing on M-audio interfaces
http://www.m-audio.com/index.php?do=products.family&ID=recording

What is the function module to be used for downloading a document in PDF .

Can some one tell me the FM tht shd be included for dowloading a report to a PDF.
if possible send me the sample code , and tell me , what all parameters are required to be passed ..!

Check the Sample programs:
RSTXPDFT4
RSTXPDFT5
The FM is: CONVERT_ABAPSPOOLJOB_2_PDF
Regards,
Ravi Kanth Talagana

What is the latetest iPhone I can use for a pre paid phone plan

I want to buy a phone and pre-pay month to month. Everyone says I can't but my X-wife, my daughter and my granddaughter all have that type of service.

That depends on where you are and what carrier you want to use.
In the US, there are no supported GSM carriers that offer pre-paid service for the iPhone. There are a number of CDMA carriers that do, but you must purchase a phone specifically for their network.

What is the best camera technique to use for this project?

hi, im making a small thing for my gf on motion. i have it so that certain text appears along with pictures. i want the camera to pause momentarily to read what it says and then begin moving to the next set of text/pictures, then stop there for a little while too, then go on to the next one, etc etc.
whats the best way to do this? the pictures/text are NOT in a straight line so making the camera go straight through wont work. one might be directly in front of the camera then i will have made the next set to be directly downward so i want the camera to swoop down there and pause on them, then the next set might be straight up all the way at the top etc. how can i get the camera to move then pause, move then pause over and over where i want it to until the project is over?
sorry if this is a noob question but i have no idea
thanks!!

What version of the studio are you using?
In Motion 3 you could try keyframing the camera move , the zoom layer behavior, or Move behavior.
If you've got Motion 4, try the Camera Framing Behavior.
There are several ways to accomplish what you want to do, it really comes down to what you are most comfortable with.

What is the best mail app to use for handling graphics?

I am really struggling with the Mail app on my new Mac. For my work I need to be able to send graphics and hyperlinks in emails so that they appear to the recipient within the email and not as attachments. Thanks to this site I have worked out how to send one picture (ie make it a png or tiff file). However, I can't do what I used to do on my PC with Office / Outlook. I would produce graphics and text in Word including hyperlinks, copy and paste that directly into my Outlook mail and it would appear in the mail precisely as it did in Word. I could still then edit it within Outlook too - eg change the hyperlink destination - and when I sent it the recipients woudl be able to see it all, click on the hyperlinks, etc.
With the Mac mail app this doesn't happen. Whatever I create in Word (I haven't had time to learn Pages) appears as a non-editable image, the hyperlinks are not clickable and in order for it to appear within the email and not as an attachment I have to save it first as a PNG which is cumbersome. I was under the impression that Macs were brilliant at graphics but this is taking me hours longer than my old PC. I'd be really grateful for any advice. Thanks

There are quite a few email programs available for OS X. A Google search for Email Programs that work on OS X will turn up most all of them. As to which one works best with graphics in sending and recieving emails I'm not sure.

What is the best preference settings to use for CS5 Suites

I upgraded my PC a few months back and I'm currently running the CS5 suites. A few weeks ago I started having issues with the CS5 suites freezing up & in some cases even crashing on me. I always run Illustrator, Photoshop, Indesign & bridge at the same time, as I'm constantly moving between program on any given project. What I'd like to know, is if there's an optimum setting to use in the preferences for each program, including bridge to help them run more smoothly & efficiently, without the computer or programs bogging down or crashing on me. Below is a list of the hardware I'm running, which I've been told is more than enough to run the CS5 suites. Any information would be greatly appreciated, as I'm starting to get frustrated with the performance.
Hardware & operating system:
- Windows 7 service pack 3
- EVGA X58 FTW3 motherboard
- i7 960 4-Core CPU
- GeForce GTX 470 Sli graphics card
- Corsair Extreme 24 gigs ram
- 3 TB 7200 RPM hard drive

Generally speaking, freezing and crashing problems don't have to do with performance configuration settings, and there are fairly few such settings that affect most applications. Video editing software tends to have a bunch, but that doesn't sound like it is pertinent to you.
Indeed, your hardware sounds far more powerful than you'd need to easily avoid problems based on performance limitations.
I suspect, then, that each of the problems you are seeing is a seperate unique problem not a result of a configuration choice. It'll need to be debugged carefully with full details, and as close as you can get to a reproducible case as possible.
In InDesign, about the only settings of relevance are whether Live Screen Drawing is turned on (images resize in realtime when you adjust their bounding boxes), and whether the View > Display Performance setting is set to Typical (the default) or High Quality.
You could also experiment with disabling Live Preflight.
You mention running 4 apps at once -- when you do so, are the non-active applications performing computation, or just sitting there idle? For instance, are you executing a complex filter operation in Photoshop at the same time as exporting a PDF in InDesign, all while you are drawing patterns in Illustrator? I assume the answer is Probably Not, in which case it lends strength to the hypothesis that the performance characteristics of your machine are not at issue here.

What is the snapshot folder in itunes used for?

Similar Messages

Maybe you are looking for