What is the software compatible with the BB Bold LCD screen 003/004 ?

My screen broke, so i bought a new one and replaced it myself, but i didn't check the compatibility. I installed it but it's blank, i read somewhere that it's a software thing, so i thought maybe i could reboot my BB's whole software instead of buying a new LCD screen for 50 $. The one i bought is the 003/004, but the one i need is the 001/004. Is there any way of fixing this without having to change the screen again? i have all my info backed up so i don't care losing everything. 
Thanks!! 

on Windows, you can use any software to cut your mp3 for the part you want.
you can use mp3cutter or Audacity.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • What Bluetooth headsets are compatible with the iphone 4

    What Bluetooth headsets are compatible with the iphone 4

    All headsets which support
    Ctp for just calls
    A2dp for all audio
    Read more here
    http://en.wikipedia.org/wiki/Bluetooth_profile
    http://support.apple.com/kb/ht3647

  • Hello, is the itrip compatible with the iphone 4s?

    Hello, is the itrip compatible with the iphone 4s?

    Which one? My friend has a wireless iTrip and it works fine with her 4S.

  • Is the ios8 compatible with the iphone 4s

    Is the ios8 compatible with the iphone 4s

    Compatible?  Well, let's just say that it works. 
    In my case it works well enough for me to keep me from joining the stampede to buy an iPhone 6.  The main reason why I decided to take a chance on the upgrade was for the enhanced security features.
    The big lesson that I learned is to be patient with the installation process.
    When upgrading to IOS8 on a 4S, allow approximately 1-1/2 to 2 hours, even when using a reasonably high-speed connection.  Because the installation takes more than 4GB of storage on the device, you probably will have to temporarily delete podcasts, downloaded iBooks, videos, and larger apps like Numbers, Pages, and Keynote even before you may download the update.
    My total time using a was:
    Making space on my 16GB 4S: 10 minutes (but, to be fair,  a little housecleaning was overdue)
    Download time at approximately 31-33 mbps: <6 minutes
    "Preparing": 50 minutes
    "Installation" ""Verification" and initial restart:  55 minutes
    I have observed a very slight hesitation or slowdown when opening some apps for the first time,  but it is not annoying.  I have not observed any noticeable effect on battery life (which was not that wonderful using IOS7), nor the heat that some people have reported.

  • What audio interfaces are compatible with the iMac/Intel computer?

    I see that MOTU has Intel-compatible drivers for its high-end audio interfaces. Are there any other audio interfaces--USB or Firewire--that are at present compatible with the Intel Duo Core machines that are under $300? I've checked with Tascam and Presonus, and theirs are not yet compatible. I have an inquiry in to M-Audio, but haven't heard back yet.
    PS: Does anyone else think it is just a teensy bit dishonest of Apple to be selling audio interfaces in its online store without pointing out explicitly that they don't work on the Intel machines?

    Well, it looks like M-Audio's Firewire Solo has a beta driver available for the Duo Core. Better than a poke in the eye with a sharp stick. And it's well under $200 at a couple online stores.

  • Is the Touch compatible with the old radio/remote control?

    I was wondering if anyone knew if the new Touch was compatible with the clip-on FM radio/remote control
    http://www.superwarehouse.com/AppleiPod_Radio_Remote/MA070GA/p/729855
    (it plugs into the dock connector) I would like to be able to control my iPod without taking it out of my pocket. Thanks in advance!

    boooooo...!
    well, i'm a little disappointed. at least they added the Home Button doubletap feature. I guess I'll just memorize the button layout i've been using a touch-sensitive 3G iPod for 3 years+, so i'm not a stranger to that kind of thing
    and wait for a third-party solution
    thanks for your help
    Message was edited by: Alexander Chan1

  • Is the T440p compatible with the Ultrabay battery?

    Question in title. I want to know if the T440p is compatible with the ultrabay battery. I don't have any use for the optical drive and I know the ultrabay HDD caddy is awful, so i figure I may as well make use of this extra space.
    If not well that's a shame, kind of useless to have such a thick laptop with such a small battery.
    Solved!
    Go to Solution.

    Hello.
    The UltraBay HD caddy works perfectly in mine. Got a 9.5mm 1TB drive in it, and it fits very snugly (I of course added the TP rubber rails to the drive as well), performs like a champ and spins down as configured.
    I also got UltraBay caddies in my T400 and W520, never had an inkling of problem with them.
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • Is the iPhone compatible with the Music Link I have in my 2006 Honda Accord

    I have a 2006 Honda Accord with Music Link so I can play my iPod through the speakers. Is the iPhone compatible with this?

    Welcome to the forums.
    It appears that update 1.1.2 (or perhaps even 1.1.1) "fixed" some issues with the iPhone not working with certain iPod car stereo systems. However, not all seem to be working. As others have suggested, trying it may be the only way to know for sure.
    If you haven't bought it yet and this is one factor then perhaps you could borrow a friend's iPhone to see. However, I wouldn't make this the primary reason to buy an iPhone.

  • What docking stations are compatible with the probook p640

    I have looked on the hp website, but cannot find the probook 640 listed as being compatible with any of the available docking stations.  Can someone tell me which docking stations will work?
    Thanks

    crevitch wrote:
    I have looked on the hp website, but cannot find the probook 640 listed as being compatible with any of the available docking stations.  Can someone tell me which docking stations will work?
    Thanks
    Did you also try to contact HP support? They will need on the support side your Serial number to verify what docking stating it can use.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • What usb keyboards are compatible with the Intel iMac

    Please can someone tell me what USB Apple Keybouards are compatable with the intel Imac
    howard

    Some PC keyboards may not work with the Mac. Especially, specialty gaming keyboards will not work with Macs and OS X.  Some PC keyboards are designed to specifically work with newer versions of Windows at that's it!
    They may not even work as a basic keyboard, but not entirely sure.
    I know for a fact specialty gaming keyboards do not work at all on a Mac because there have been posts here from gamers who tried to use special gaming keyboards and mice and they would not function on a Mac.
    If you know anyone with a Mac, ask them if they have a spare Mac keyboard you can try before buying.
    Good Luck!

  • TA48312 what realplayer version is compatible with the new safari

    good day everyone,what version of realplayer works well with the new safari,i am not able to download videos from youtube anymore,thanks

    Read this: "Why can't I install Flash Player on my Tablet?" (Kindle or Samsung Galaxy)

  • What WiFi extender is compatible with the MI424WR router?

    My house is larger than the MI424WR router can service with wireless connectivity and I'm looking at adding a wifi extender, but want to be sure it will work with the Actiontec MI424WR router I have with FIOS. I'm thinking of the Linksys RE1000. Anybody know if that (or any other extender) would be compatible?
    Thanks.

    You're not adding a "second line," you're just extending your LAN.
    The key point to understand is that the primary router provides LAN access on three different media; wired Ethernet, WiFi and over the coax (using a system called MoCA).  Normally, the only coax clients on the LAN are set-top boxes.   However, the coax LAN is available to anything that plugs into coax.  Thus, all you need is a device that converts the coax LAN to something more useful, like Ethernet or WiFi.  This is called a "bridge," and is a different function than a router.
    There are several devices that can be used to bridge coax MoCA to Ethernet and/or Wifi.  Actiontec routers can be run in bridge mode, and are suggested by many folks on these boards.
    Here's a link that explains how to do it:
    https://secure.dslreports.com/faq/15984
    Have Fun.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Is the ios7 compatible with the ipod touch 5th generation

    does the ipod touch 5th generation get the new ios7?

    About iOS 7
    The following from Apple is all that we know about iOS7 at this time. We are users, too, so we know no more than you.
    iOS 7 will be available as a free software update for iPhone 4 and later, iPad 2 and later, iPad mini and iPod touch (fifth generation) this fall. Some features may not be available on all products.
    *US English, French and German will be available with the launch of iOS 7. Additional languages will be added over time.
    For general information on the features of iOS 7 see: Apple - iOS 7.

  • Is the C100 compatible with the PIX 240?

    I know the answer should be yes, but I am having trouble with mine.
    When plugged directly into the PIX, I get a "no video" warning and the HDMI menus blink showing imcompatability. But, when I run the HDMI through a simple 5v splitter, the signal locks in immediately.
    I've spoken with Canon a couple of times as well as Sound Devices and I'm not getting anywhere. The C100 feeds a monitor just fine. The Pix records other HDMI inputs without a problem. But the two together just don't work. Has anyone else run into this situation?  I've talked to a couple of other shooters and rental houses and all of their units are compatable and working. I do have the latest firmware on both units. I have run through the menus with both companies. Is there something I am missing? A small setting somewhere that will clear this up?
    To make it worse, I have a colleague who also owns a C100 and his also does not show up on the PIX.  I'm not about to purchase a Ninja as I have the PIX already it it works with everythign else I own. Just wish I could get an answer on why it won't cooperate with the C100.
    All comments welcome. A forwarded solution may result in several comped beverages at NAB in April.

    I've spoken with Canon tech support twice.
    Frame rate is not the issue. 1) The recorder auto detects what is coming in and displays it. Record settings are then made available based upon what is being fed in. 2) The hardware converter in this is pretty good so converting has yet to be a problem.
    But... I cant even get that far.   The signal is not recognized, at all. The recorder just states :No Input  Same as if nothing is plugged in.  When the recorder is plugged in, otput options under the HDMI menu in the camera are no longer available. They blink or grey out. This result has been reproduced with a second C100.
    Yesterday I tested the recorder with 4 different cameras with different resolutions and frame rates. All worked thru the HDMI input to the PIX 240 except the C100. I dont want to be pointing a finger but getting the responce over the phone of, "it not in our unit" is discouraging when its the only one I am having trouble with.
    ~~~~~~~~~~
    I did the test with a colleague present. He is confused as well and asked if there was an OVERRIDE option that would turn off the HDMI communication? That would atleast allow the info to go from the camera out to the recorder with out getting an "imcompatable" signal back in that greys out the menus.
    Any thougths on this?  I have a second PIX unti being lined up to test with that. If I get the same results on that unit it will confirm it is in the camera.

  • Is the WRE54G compatible with the WRTP54G ??

    I have a WRTP54G, eg the wireless router that comes with Vonage, and then bought a WRE54G to extend the signal because compatible with WRT54G/GS etc. (I missed the little "P" in the product name...)
    I did the standard installation procedure, but the WRE54G does not work.
    Is there any configuration or special way to install it that could make them work pls? any recommendation welcome!
    THANKS.

    You have WRTP54G wireless router. The default IP address of this router is 192.168.15.1. And you have WRE54G range expander and the default IP address of this range expander is 192.168.1.240. Both the devices are in a different IP address range. Try to configure the Range Expander manually.
    Press and hold the reset button for 30 seconds. Release the reset button. Unplug the power cable from your Expander, wait for 30 seconds and re-connect the power cable.
    1. Connect your Expander to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties. On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button. Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0. Click on OK button to Save and Click on "Close" on main Properties window.
    2. Now open an Internet Explorer browser page on your wired computer(desktop). In the address bar type - 192.168.1.240. Leave the User name blank & in Password use admin in lower case. It should open your Expander set-up.
    3. While changing the Expander settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(Router and Expander).
    Change the Expander's IP Address : 192.168.15.240,Subnet Mask : 255.255.255.0, Default Gateway : 192.168.15.1.
    5. After configuring the Expander you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically. Disconnect the Expander from the computer and power cycle both the devices(Expander and Router) . Your Expander should be configured.

Maybe you are looking for