What is the software/firmware version and Nike+ipod problem

Mine says 1.0.1 in iTunes and says it is up to date. I tried to update the 1.2 version from June and it won't let me.
I am having problems with the Nike+ipod receiver recognizing the sensor and the Apple help says to have version 1.2.
Any thoughts. I've never used this before so I guess it is possible that the sensor is broken from the start.

Hey, i though that i have the same problem but for 2nd gen ipods you dont need the 1.2 version but the 1.0.1 that come with the ipod instaled. When you put the transmiter it works ok
fern ando

Similar Messages

  • What was the last firmware version for the Zen Micro before M

    I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
    Please make sure you are 00% on this.
    Thankyou.

    I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
    May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
    There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

  • Just tried to install the latest firmware version and the screen has been grey for the last 30 mins

    Just tried to install the latest firmware version and the screen has been grey for the last 30 mins, any ideas what to do now?

    ..Step by Step to fix your Mac

  • What is the latest firmware version for iPod Photo?

    I got a iPod Photo 60Gb and try to connect this to my Ice Link Gateway 500 in my car. It work fine on my other car using icelink but doesn't work with the new one. It say it does support iPod Photo. I wondering what version should it be on?.. I test other iPod Nano that work fine on it. I guessing it doesn't detect the gateway 500 as it automatic show up on iPod Nano screen. Where my iPod photo saying It is ok to disconnect.

    What is the latest firmware version for iPod Photo?
    1.2.1.

  • What is the latest firmware version for STA1520 Tuning Adapter?

    I have several customers experiencing random reboots of their tuning adapters (STA1520).  They are running firmware version 1402 and I have heard that there is a newer version of firmware that resolves this issue.  What is the latest firmware version?  Does it resolve this issue?

    1501 Solves the reboot problem

  • What's the latest firmware version for the Xperia Tablet Z?

    What's the latest firmware version for the Xperia Tablet Z?
    According to the Swedish and British Sony website, the latest version for the Xperia Tablet Z is 10.1.1.A.1.253 released on 17th of May.
    But this is the latest version for the Xperia Z (phone) not the tablet Z... Or am I wrong?
    It's a bit confusing, when the manufacturer cannot keep track of the phone and tablet...
    Solved!
    Go to Solution.

    Depends on if you have the WiF version or the LTE version. For LTE the latest is 10.1.1.A.1.253 and for WiFi it's 10.1.C.0.344.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • What is the latest Firmware version

    Can anyone please advise what is the latest firmware version for the Torch 9800.  Thank you.

    Yep, follow this instruction:
    Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
    Download the OS file from the link I gave you above.
    OR
    First locate your carrier and the OS file you wish to use.
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
    1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
    2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml." (You might have another Vendor.xml file hiding on your computer. Open Windows Explorer and under the Organize button (on Windows 7, there are similar tools for Vista and XP) click on "Folder and search options." Under the View tab, make sure that your computer is set to show hidden folders and files. Once you've done this, search your C:\ drive for "Vendor.xml".)
    3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
    **Starting with the later OS6 releases, there are now three copies of VENDOR.XML
    C:\Program Files\Common Files\Research In Motion\AppLoader (for 32-bit Windows XP/Vista/7)
    ==========OR============
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader (for 64-bit Windows Vista/7)
    C:\Documents and Settings\*name*\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    C:\Documents and Settings\*name*\Application Data\Research In Motion\BlackBerry\Loader XML
    You can also just search for VENDOR.XML. Make sure that you choose ADVANCED SEARCH and include hidden files. It should show the file in at three locations. Delete every copy that it finds.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What is the latest firmware & version of SANtricity for my FlexLine 280's?

    We have a pair of FlexLine 280's. They are at firmware 6.12. We use SANtricity 9.19.G2.04 to manage them.
    I have been doing some research and know there is firmware levels 6.19, 6.60, and 7.x out there. Although, I'm not sure if there is a 7.x for the FLX280's.
    I also know there are newer version of SANtricity, 9.19.G2.06 and a 10.10 version. But again, I'm not sure if 10.10 is compatible with the FLX280's.
    So, can somebody help me out? What is the latest firmware for my FLX280's? What is the latest version of SANtricity I can use?
    Also, am I entitled to free SANtricity upgrades? I am under a maintenance contract. Or is that something I would have to purchase?
    Thanks for any help,
    Nathan

    NNellans wrote:
    We have a pair of FlexLine 280's. They are at firmware 6.12. We use SANtricity 9.19.G2.04 to manage them.
    I have been doing some research and know there is firmware levels 6.19, 6.60, and 7.x out there. Although, I'm not sure if there is a 7.x for the FLX280's.
    The f/w 7.x isn't supported for the FLX280. The latest f/w is 6.60.xx.xx and there will be not 7.x f/w for the FLX280. In other words, the 6.60.xx.xx is the latest f/w we'll have for the FLX280.
    I also know there are newer version of SANtricity, 9.19.G2.06 and a 10.10 version. But again, I'm not sure if 10.10 is compatible with the FLX280's.
    So, can somebody help me out? What is the latest firmware for my FLX280's? What is the latest version of SANtricity I can use?AFAIK, the latest f/w is 06.60.11.20.
    As for Santricity I cannot answer.
    Also, am I entitled to free SANtricity upgrades? I am under a maintenance contract. Or is that something I would have to purchase?You need to contact your Sun support representative to validate this.
    Regards

  • What is the latest firmware version for beats pill 2.0

    Hi
    Can someone tell me what the latest firmware version for beats pill 2.0 is?
    Thanks
    Sam

    1501 Solves the reboot problem

  • What is the latest IOS version for my ipod

    What is the lastest IOS available for my Ipod?

    If it's a first generation model, 3.1.3.
    If it's a second generation model, 4.2.1.
    If it's a third generation model, 5.1.1.
    Otherwise, 6.1.3.
    (81365)

  • Updating software/firmware version for 4G ipod

    Hello, I have a 4th Gen iPod (click wheel w/ grey screen) and recently bought a Pioneer car receiver that has an iPod USB connector built in. When I plug my iPod in, the car doesn't recognize it. The installer told me to update my firmware and he tested his iPod video and it worked fine. My 4G software version shows as 3.1.1 and it appears to be the most recent version. Are there other versions out there that I could upgrade to in attempt to make this work? Also, what is firmware and is it upgradable indepently from the standard iTunes upgrades?
    Thanks

    what is firmware
    http://docs.info.apple.com/article.html?artnum=93772
    is it upgradable indepently from the standard iTunes upgrades?
    No.
    My 4G software version shows as 3.1.1 and it appears to be the most recent version.
    It is.
    I would suggest that the iPod model you own is maybe not compatible with this Pioneer unit. The fact that the installers video iPod worked doesn't mean anything since you don't own that model.
    Do Pioneer say that the receiver is compatible with all iPods, or just certain models?

  • HT201210 which is the latest firmware version for an ipod touch 2g

    I tried to update the software for my ipod touch 2g but i cannot it says that i can change the firmware version which is the latest version that i may use? because the safari application closes if i search on google but i restored to default software version but it doesnt fix the issue
    best regards

    If your iPod is at iOS 2.x as suggested by the sign off detail, that also suggests that you have a 1st generation Touch (which can be updated to iOS 3.1.3) and not a 2nd generation one. However, you have to purchase that upgrade (it doesn't cost much, check here http://support.apple.com/kb/HT2052 ) and I suspect it may not cure any issue you are having with Safari. 
    You can also confirm which generation your Touch is by entering the serial number into the "warranty check" page here; https://selfsolve.apple.com/agreementWarrantyDynamic.do  

  • What are the differences between new and refurbed ipod touch 5th gen.?

    I'm about to purchase an ipod touch 5th generation, but I see there are some very nice units available from apple as refurbished. I was wondering what the differences are between the new (purchased today) and the refurbed (released sept. 2012)?

    The only difference is that a refurbished iPod has been used before (or at least was sold before) and remanufactured. There are no differences in functionality or cosmetics between a new iPod and a refurbished unit of the same model and capacity.
    Regards.

  • Firmware version and it's benef

    I just recieved my new 6gb Micro on friday. While I was waiting, I was on the forum everyday and I came across many frimware threads. Being a newbee I woud like clarification.
    What is the standard firmware version on the 5gb models?
    I have firmware version.02.05, does this version reduce the battery power drained during AC charging?
    What are the benefits to upgrading to the new firmware (2.0x.xx) and is the upgrade worth it's

    What is the standard firmware version on the 5gb models?
    Some seem to be shipping with .02.05
    I have firmware version.02.05, does this version reduce the battery power drained during AC charging?
    There's no problem with battery drained *during* charging. And no firmware yet corrects the battery drain issue, only the connection order problem (which is detailed in the firmware's details at the download page).
    What are the benefits to upgrading to the new firmware (2.0x.xx) and is the upgrade worth it's
    It adds MTP support, which is essentially driverless support on Win XP systems with WMP0. I would suggest you don't do it, unless you really want this feature.

  • I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

    I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

    You will probably need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

Maybe you are looking for

  • DUMP while running my import FM

    Hi ALL, I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP. I have gone dump analysis its saying An exception occurred. This exception is dealt w

  • Query in Av Check and TOR

    Dear Sap Gurus, I am a fresher in SAP ISU  trying to learn the concepts of AV check and TOR. Intial stock is zero for material 'x'. Sale order is created for qty 10 of material 'x' and saved. In schedule line system confirms that the material can be

  • Access Denied Error Opens when Installing HP Monitor Software (Windows 7)

    im getting the following error trying to upgrade my screen driver. "Access Denied Error Opens when Installing HP Monitor Software (Windows 7)" I found this error in the help area but it doesnt address the problem, it simply describes the device manag

  • Organizing compilations

    This is my first post here so hi. Btw, i tried to search for this but i couldn't get a good answer. I've got a problem with iTunes 7.1.3., and a compilation album. I've got my iTunes sorting on Albumartist. That's ok, the complete album (consisting o

  • Regarding duplicate records allowing

    Hi,    From R3 system we are getting duplicate records., we need this duplicate records on the cube., so what option have to select as at cube to allow duplicates.                               Can anyone please let me know on it.