What is the solution for display flickering for macbook pro??

What is the solution for display flickering for macbook pro??
i have a macbook pro 13.3 late 2013 model, i was using it suddenly the screen went black out and came again it happened for around 15 mints
then i went blackout for a long time then after 3 hours it suddenly again the screen displayed properly for 4 hours, again it went black out. please give me a solution regarding this.

Reset PRAM: http://support.apple.com/kb/PH14222
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

Similar Messages

What is the best application to optimize my Macbook Pro running Mountain Lion???

What is the best application to optimize my Macbook Pro running Mountain Lion???

Kappy's Personal Suggestions About OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion Apple has included built-in malware protection that is automatically updated as necessary.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
For emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Deja Vu
3. SuperDuper!
4. Synk Pro
5. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional suggestions will be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.

What is the correct adapter to connect my Macbook pro with mini-dvi to my TV with Scart

I have a MacBook Pro with mini-DVI and I want to connect it to my TV which has only a scart thing.
Can I use the mini-DVI to Video-Adapter and then a Video to Scart-Adapter?
Thanks for your help!

So of course you've corrected the title : "What is the right PLUG to connect my macbook pro to my TV ?"
OK so a bit more info : my TV is a Sony Trinitron TV.
It has the yellow/red/white plugs. I don't believe it has anything more sophisticated or recent than that.
Thanks for your help !

What are the materials used to make a macbook pro?

What are the material used to make a macbook pro?

http://www.apple.com/environment/reports/
In these reports are breakdowns like this:
as well as other information regarding, for instance, restircted substances.

What is the best way to connect a MacBook Pro to my HiFi system ?

Hi,
I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5 CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ?
I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
Thanks in anticipation of some advice.

What is the best way to connect a MacBook Pro to my HiFi system?
Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
The Mac's analog audio in/out ports doubles as a optical in/out ports.
The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

What is the best way to protect my macbook pro? should I install mackeeper? Thank you :)

what is the best way to protect my macbook pro? should I install mackeeper? Thank you

MacKeeper is malware that charges a fee. Do not install it under any circumstances.
Keep your software up-to-date with Software Update.
Don't click on links in emails, retype the URLs to be sure you know where it is sending you.
Don't download a "codec" or program to view content on a website from the same site -- standard viewers should come from the codec developer's site, not the content site.
Don't fall for requests from your bank or PayPal to verify your information -- they don't do it that way.
Download Flash only from:
http://get.adobe.com/flashplayer/
You did NOT win any contests you did not enter, and you are not the 10,000th vistitor to any site.

Hellow everybody ok! i dont speak english well but just i want to know what is the best resolution to connect my macbook pro to mi led 55" samsung tv

hellow everybody ok! i dont speak english well but just i want to know what is the best resolution to connect my macbook pro to mi led 55" samsung tv

1080i or 1080p

What is the best external hard drive with MacBook Pro

What is the best external hard drive with MacBook Pro?

I agree with Allan, and that link is also called OWC, their hard drives are great. Have three of their Mercury Pro Elite 2 TB quad interface drives. They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options. Drives seem to come Mac HFS formatted, but I always reformat and partition the drives. Service and quarantees are top notch.
They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

What is the best way to migrate my MacBook Pro to my new Imac desk top, both seem to be running OS X version 10.9.5

What is the best way to migrate my MacBook Pro to my new Imac desk top, both seem to be running OS X version 10.9.5

OS X: How to migrate data from another Mac using Mavericks

What is the best way to backup a MacBook Pro running OS 10.4.11

What is the best way to backup a MacBook Pro running OS 10.4.1?

When I was using 10.4.1, which was years ago, I used SuperDuper.
Allan

What is the best way to increase my macbook pro's memory, it is 4g now.

What is the best way to increase my Macbook's memory? it is a 4g now.

And what is the exact model of MBP that you have?
Normally, assuming your Mac supports more than 4 GBs, the best way is to buy the specific RAM required for your machine to replace the RAM that is now installed. But we can't tell you that without knowing what model you have.
Open System Profiler in the Utilities folder and report what you find displayed for the Model Identifier.

What are the best Color "Display Settings" for both my Macbook Pro Retina and Thunderbolt Display??

I have recently purchased a Thunderbolt Display for my MBPr (early 2013) and was wondering what were the best settings for both to obtain an equal color and graphic appearance. I want to have them identical for working on graphics and illustrations.
Thanks

I have the same laptop. There's nothing you really need to do to optimise the system. Perhaps just install the cuda drivers.
It runs premiere like a dream.

TS3694 what is the solution to error 1015 for iphone 3g

my iphone 3g isnt fully restoring its giving an "error 1015" error pop up on itunes, how do u fix this so it could restore?

The solution is that you should not have hacked or jailbroken your iPhone.

What's the best way to check my macbook pro for malware?

I've noticed of late a couple of random popups and suspicious-looking installers on my macbook pro. How can I check for malware? And if my lap top's infected, how can I disinfect it?

There is no need to download anything to solve this problem. Your desciption isn't very specific, but I'll venture a guess.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
If you find Apple's instructions too hard to follow, ask for an alternative that doesn't require you to trust a black-box application without knowing what it does.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

What is the best way to look after Macbook Pro Retina Display battery?

Hello,
I am a little confused on how to look after the battery in my new Macbook Pro with Retina Display. I have read lots of different things and I do not seem to get a clear answer.
I feel by charging my laptop all the way, then using till 0% and doing it all over again uses the cycles faster and therefore meaning it will not last as long. I also read that having that laptop plugged in a lot of the time will also damage the battery. I have read the document Apple have posted online but it doesn't give me a time frame of what is or is not a good length of time for it to be fully charged and plugged in for. Should I charge then unplug or is it safe to have it plugged in for a few days when being used? I always unplug regardless when I am not in the room with the laptop.
Could someone please advice me on what they feel is the best way to keep the battery healthy. Thanks Benjamin

I think this is a great topic to get advice from the community, I have often wondered about this topic too.
My thoughts/experience are:
Cycle count seems to be the factor that ages the battery - although it is not exactly clear when your cycle count will click up by 1. I suspect it must be significant use or period off charge - but no idea how to quantify that.
I mostly have my unibody 15" MBP (early 2011) plugged, so after 14 months my cycle count is 28 and the battery charges to around 93-96% of initial capacity.
I use Watts and coconutbattery to keep an eye on battery condition and Watts is set to remind me to do a complete discharge/recharge (calibration) every month or so.
However I was away for 10 days recently and left MBP plugged in but shutdown. Before going I'd been keeping MBP extra busy and had skipped a calibration. On return I was using normally and then got a clue that all was not well with my battery although it said fully charged in menu bar.
I pulled the magsafe, instant off just like pulling lead on a desktop. No charge.
Magsafe LED showing green but no charge and not charging. Battery status said to replace battery.
Feeling upset at the suddendeath of a good friend I tried to reset SMC but the instructions seemed not to help.
Finally LUCK with an idea: I shutdown, unplugged, waited a bit, plugged while holding power button down and LED went orange, my battery started charging and went up to 96%.
I had been about to go pay for a new battery!
So good usage is important and we/I are not that well informed about best usage - I had been looking.
Maybe not everywhere but....

What is the solution for display flickering for macbook pro??

Similar Messages

Maybe you are looking for