What is the solution to the following: Backup Failed. The backup on "my Time Capsule" is already in use.

What is the resolution to the following error message: "Backup Failed. The backup on "Name Time Capsule" is already in use."
Time Capsule 2nd Generation;
Mac Book Pro, late 2013, 2GHz Intel Core i7; 8 GB, 1600Mhz DDR3; OS X 10.9.4

Pull the power cord from the TC.. count to 10 slowly.. plug the power cord back into the TC.. voila.. problem fixed.
BUT a gen2 is getting long in the tooth.. get reach for hardware failure.. and this might be the first signs.

Similar Messages

HT201250 My time capsule is not allowing a back up indicating the 'time capsule is already in use'. The system is set to back up and remove the oldest back up so it is not 'in use' as far as can see. I believe something is in error. Thoughts?

I am new to this capability. My problem is that my time capsule is not allowing a back up and indicates, The Back up 'is already in use' yet I have made no changes since I set the system up and now I am seeing this failure. Thoughts?

Thoughts?
Bugs in Mavericks.
Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes, then try a backup

How to transfer backup file from old to new time capsule?

I'm having trouble copying the backup from my old to new time capsule. I tried using this http://support.apple.com/kb/HT5097?viewlocale=en_US

You need to point out at which point you are failing.
You do need the two TC plugged into each other by ethernet.. do not even dream of doing this over wireless. So a computer is plugged into the primary TC as well.. the secondary TC is in bridge mode.. you then simply copy and paste the sparsebundle from one TC to the next.
IMHO this is not a good idea.. you are much better starting a new set of TM backups on the new TC.. keep the old TC for a few weeks to make sure there is nothing you need to recover then wipe it.
There are also instructions in pondini if you insist on doing it.
Transfer TM backups..
Apple doco. http://support.apple.com/kb/ht5097
Pondini doco http://pondini.org/TM/18.html
The apple doco you have already tried.

I'm getting the following message and need to know what to do about it: "The backup disk image "/Volumes/Joyce's Time Capsule/Macintosh.sparsebundle" is already in use."

What do I do to get backups to resume, when getting this message: "The backup disk image “/Volumes/Joyce's Time Capsule/Macintosh.sparsebundle” is already in use." ?

Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes, then try a backup again

What are the procedure to be followed while restart the exchange server..?

Dear All,
Pls provide the procedure to be followed while restarting the exchange server. i.e. what is the sequence for restarting and starting the exchange server.
Regards
R Nantha Ram

As suggested above no such procedure to be followed unless it is a DAG.
If you are running exchange and DC in one OS. Stop exchange services first then restart server. (commands below to stop exchange related services)
net stop msexchangeadtopology /y
net stop msexchangefba /y
net stop msftesql-exchange /y
net stop msexchangeis /y
net stop msexchangesa /y
net stop iisadmin /y
net stop w3svc /y
This is bcz DC stops quicker than Exchange, therefore Exchange is unable to write to the domain controller and has to be be "killed" by the operating system.
This continual "killing" of the Exchange services, instead of allowing them to shutdown gracefully is not good for the database and is one of the prime reasons for recommending that Exchange is not installed on a domain controller.
A better option is to stop the services before you begin to shutdown the server. This will also cause the server to shutdown more quickly because it isn't waiting for the services to timeout. This can significantly decrease the shutdown/reboot time of Server.
MAS

HT3275 The Green light is on my time capsule the air port also has a green light but it will not back up all i get is the following message.The backup disk image "/Volumes/Data/iMac-D49A20D0AE94.sparsebundle" is already in use.

The Green Light is on, on my time capsule and airport but it will not back up all i get is the following message below please help.
The backup disk image “/Volumes/Data/iMac-D49A20D0AE94.sparsebundle” is already in use.

Welcome to Apple Support Communities
First, restart your iMac and your Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, read > http://pondini.org/TM/C12.html

HT3275 The backup disk image "/Volumes/Data/Mac mini.sparsebundle" is already in use. What does this message mean?

This is the error message that comes up when my computer says that the time machine couldn't complete my backup. Does anyone know what this means?
Regards,
Jbyrdks

See here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm

HT1218 How do I troubleshoot this: Time Capsule cannot complete the backup. The backup disk image "/Volumes/Data/ MacBook Pro.sparsebundle" is already in use.

This is the second time I've encountered this issue with Time Capsule using Time Machine automatic backup. I haven't found the following specific error message in the list of troubleshooting issues: "Time Capsule cannot complete the backup. The backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use."
I'm not certain what causes this issue. I think it may have something to do with having to force shutdown with apps still open when the beachball hangs and the MacBook has to be rebooted.
Has anyone else dealt with this issue?

Welcome to Apple Support Communities
Restart your Mac and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

HT201250 My Time Machine is not backing up and gives me this error report, 'The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use. Time machine could not complete backup. Can anyone help me?

My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?

Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help.

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17). Help

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!

Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up.

Time Machine couldn't complete the backup to "Time Capsule".The backup disk image "/Volumes/Data-1/Macintosh.sparsebundle" is already in use.

When I back up my macbook pro to time capsule 3TB, this appears:
"Time Machine couldn’t complete the backup to “Time Capsule”.The backup disk image “/Volumes/Data-1/Macintosh.sparsebundle” is already in use."
and I'm not able to back up. What do I do?

As noted in the link I posted, that's fine if you're the only user logged-on to the only Mac using the TC's disks (internal and/or USB externals). If not, that may corrupt other data being written, especially other backups.

Hat is this "Time Machine couldn't complete the backup to "***Network Name***' The Backup disk image "/Volumes/Data/MacBook Pro.sparsebundle" is already in use"

"Time Machine couldn’t complete the backup to “***Network Name***’ The Backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use"
What does this mean and how do you fix it?

I got that the file is in use, what is the trick to release the file. This has something to do with X.8, never had this problem befor I uploaded .8

Time machine The backup disk image "/Volumes/Data/Freedom Book.sparsebundle" is already in use.

I am getting the following error message from Time Machine (backing up to my 3 TB Time Capsule):
The backup disk image “/Volumes/Data/Freedom Book.sparsebundle” is already in use.
I have no idea why this would be in use, because only one MBP has the name "Freedom Book". Any advice on how to resolve? Running Mountaiin Lion 10.8.1.

I had the same error. I unplugged my TimeCapsule for 5 min from power. Plugged it back in to power then waited 10 min for everything to comunicate again. Clicked on backup now and it worked. Must have froze up or something.

The backup disk image "/Volumes/Data/MacBook Pro.sparsebundle" is already in use

My time capsule has been backing up fine and then I got an error message "The backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use." and the backup failed. This has been happening every day now for a week. The green light is still on the machine...... any help appreciated...

Two Solutions for "sparse bundle already in use" Error
Simple solution (from Bob Timmons):
1. Make sure that no other Macs are backing up the Time Capsule at the time
2. Pull the power cord from the back of the Time Capsule
3. Count to ten
4. Plug the power cord back into the back of the Time Capsule
If Simple doesn't work:
The Backup disk image ... sparsebundle ... is already in use.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error???

What is the solution to the following: Backup Failed. The backup on "my Time Capsule" is already in use.

Similar Messages

Maybe you are looking for