What is the source file structure while doing the BDC of mm01
What is the source file structure while doing the BDC of mm01
Hi,
first u create a meterial note the data u enterd in the screens.
if u have created the material successfully then that data structure will be the source structure of the
file.
regards.
Jagadeesh.
Similar Messages
-
So i started an edit and had the whole thing finished and ready to export in Final Cut X, when i went to export I had a message pop up say that it couldn't export while FCP X is still referencing media. I went through trying to solve the problem and ended up deleting the source media folders in the Final Cut Events folder and reimporting the clips. This lead to a whole can of worms opening up and now i'm left with a whole edit with 90% of the clips in the timeline unable to relink to source media.
Can anyone help?First find the files. Then File>Relink Event Files and point to the folder.
-
How to validate the existing Serial number while doing the GR.
Dear,
When we are doing the GR, If we given existing Serial number is in input System is accepting and update in the existing serial number (Equipment).
It is throwing error when equipment is in ESTO status and Stock information is available in the equipment but When equipment is in AVLB status without stock information in equipment it is updating in the same Equipment / Serial number and status is changed to ESTO.
However my Requirement is system should not allow or throw error when we are give input existing serial number while doing GR, How to do this.
Regards
Kishorewhile INSTALL is running?
I guess there is no way to do this... -
Changing the default file name while saving the PDF interactive form
Hi All,
I am generating an Interactive PDF form using webdynpro, but when I try to save the PDF to my local machine the default file name comes as "<b>unknown.pdf</b>" so I have to manually go and enter the name before saving it.
Is there any way to change this default name so that I don't have to manually edit the file name each time when I want to save the generated PDF interactive form?
Please reply soon.
Thanks in advance!I am running into the same issue. Setting the desname parameter (e.g. desname=temp.pdf) doesn't have any effect. Has anyone found a solution to this?
Thanks,
Brian -
How can I get the coordinate in the layer coordinate system while doing the iterate?
I found that the position(x,y) the iterate function tell me is not right sometimes.
Actually,it happens when the top of the layer is negative. The "y"is in the comp coordinate system(maybe?) but not the layer.In another word, the position with y=0 is not the top.
More specifically, I have got the color map of a layer. I am able to get the color of any pixel in the layer. But I can't set the color one for one when I use "iterate",because there is an offset.
Am I supposed to get the offset? Is there any way to access the whole layer directly if I use iterate function?so indeed it's the offset at play.
AE will diminish the buffer at 20% increments, and not for each pixel that
goes out of sight. it's not really in relation to the upper left corner,
it's all about what part of your layer buffer is out of sight.
there's also an "iterate offset function". check it out. perhaps it will
save you some trouble.
On Fri, Dec 19, 2014 at 2:45 PM, Hinanawi Tenshi <[email protected]> -
How to programmatically get the source for a class provided the class name?
Hello,
As a quick background, I am providing some tools to potential users of an in-house framework. One is the ability to generate quick prototypes from our existing demo applications. Assume a user downloads our jars and uses them in their project (we are using Eclipse, but that detail should not greatly affect my question). Included in the jars is a demos package that contains ready-to-run classes that serve to exhibit certain functionality. Since many users may just need quick extensions of these demos, I am trying to provide a way for them to be able to create a new project that starts with a copy of the demo class.
So, the user is provided a list of the existing demos (each one uses a single class). When the user makes their selection, with the knowledge of our framework, I can translate that into what demo class they need (returned as a string of format package.subpack1.subpackn.DemoClassName). What I now want to do is to use that complete class name to get the source (look up the file) for the corresponding class, and copy it into to a new file in their project (the copying into the project can be done easily in Eclipse, so what I need help with is the bolded part). Is there a simple way to get the source given a class path for a class as described above? You may assume the source files are included in the jars for the framework.
Thanks in advance.If there's a file named "package.subpack1.subpackn.DemoClassName.java" in a "demos" directory in the jar, then yes. You'd just use
InputStream code = getResourceAsStream("/demos.package.subpack1.subpackn.DemoClassName.java");Or if those dots in the name actually separate directory names, i.e. you have a "package" directory under "demos" and a "subpack1" director under that and so on, then:
InputStream code = getResourceAsStream("/demos/package/subpack1/subpackn/DemoClassName.java"); -
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
-
While doing the Restore the "connect to Itunes Image is still on my phone and has not shut off or changed since starting the REstore. Now Itunes status bar says "Processing File" but has not changed or done anything for 15+ minutes. What do I need to do? Let it go or is it not working???? FYI, I tried to update to the 6.0.1 (I believe thats this update)
This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again. It's now attempting to "back up" from ICloud... we'll see. Thanks
-
I can't decipher where (and why) the program is putting the HDR image in the grid. I stack all of my HDR source images so they are easy to track and manage. Other apps/plugins allow you to stack resulting images with their source image. That would be great if there's a way to set that in LR preferences.
Thanks, but this doesn't really answer the question about stacking the HDR file with the source files. Yes, it does put the file in the same folder, however many of my folders have 100s of images (that often look similar) and as far as I can tell, LR places them randomly in the sort order. It doesn't appear to put them at the beginning or end of the sort (usually by date), but somewhere randomly in the middle. Even if it could be made clear what method it is using to sort them, that would help locate one file among hundreds.
Ideally, however it should allow you to stack with the stacked source files. Is there anyway to do this? If not, is it a feature that could be requested? -
Installment source item is changed while doing the Return lot Posting
Hi Experts ,
We have a requirement to Change the Payment method for the Line item while doing any Return lot Posting(FP09) .So that we have enhanced the FQEVENT 292 to change the payment method in the line item and also configured the Lock(Payment/Dunning) for some of the Return Reason code . It is working perfectly for any item except installment line item.While doing the Return posting for any Installment line item(say 1st installment out of 4 installment) ,Lock is applied and payment method has been changed for that line item which is correct but it is also changed the Source line item of that Installment Plan which is not supposed to do this .not sure why SAP is taking the Source line item ? Could you please advice me what need to do for this ?
Thanks ,
PankajHi Pankaj,
You can use BAPI ' BAPI_INSTMNTPLN_CHANGE ' to change the Installment Plan item.
Thanks,
Pratima. -
Why do we deactivate the extract structure while doing extraction
Hi experts please let me know
why do u deactivate the extract structure while doing extractionHi,
We will never deactivate the extract structure while doing extraction.
When we try to appends some new fields to the extract structure, then automatically it gets deactivated. After we append the fields, we have to activate extract structure and data source.
Finally, the DS has to be replicated in BW.
Regards,
Suman -
What does the open file dialog do 'under the hood' and is there a way to simulate it
What does the open file dialog do 'under the hood' and is there a way to simulate it?
I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
Briefly, the bug:
I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
I've tried various solutions, see the link above, and none work
The workaround:
If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
I have to do this everytime I turn the PC on.
So, either
1) Can somewone suggest a fix for the original bug?
2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
or
3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
Any help greatly appreciated.
DaveHi David
I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
Case 1
I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
Case 2
Labview is not opened. I double click the spectrometer VI in windows explorer. The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
Case 3
If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
Thanks in advance
David -
I am running version 3.6.22 and would like to update. However when I tried to update from the Mozilla web site I got the message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator"
What do I do now?? Paul Stager [email protected]I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?
-
Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.Hi,
Creating package doesn't mean it will install the product,
You will need to install the package now. Please follow the instructions mentioned in the below articles
Creative Cloud Help | Creating or editing packages
Creative Cloud Help | Deploying packages
Please let me know if it doesn't help.
Regards,
Devendra -
While doing the backup via iTune, my contacts in iPhone AND iPad have been completely wiped out. They are still all available on my Address Book on my Mac. Any idea what happened and how to resolve this ?
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
Maybe you are looking for
-
Change GL account in OBYC for transaction keys GBB and BSV
Dear Logistics Colleagues I would like to have your opinion on the following topic: I have an request to change an GL account in account determination (OBYC) for transactions: - GBB > Offsetting entry for inventory posting -BSV > Change in stock acco
-
"Tab" control and Tab order of controls inside the tab
Hello everybody, I have created the tab control with 6 'tabs', inside every tab I have some controls, like edit fields etc. I wanted to make an order of controls for every tab, so I have selected the option "Tab-order settings" from menu "Edit" (sorr
-
ABAP Code to Read Characteristic from Another DSO
Gurus and Experts, Plain and simple, I need a piece of ABAP code that reads a characteristic value from a different DSO. Here is the story. I have a data flow from DSO Delivery1 to DSO Delivery2. I need to write a code in the start routine of the tra
-
So I'm trying something for Minecraft and I need to send a file that is .zip I tried to email it to my gmail but here's what it says Unable to Send Email A copy has been placed in your outbox. No password provided. Please go to Mail Account Settings
-
Time capsule not working as wireless router
I am having trouble with my time capsule working as a wireless router. It appears in airport utility and the green light is on. It is backing up my computer which is hardwired with via ethernet. The network setting is on bridge. Any thoughts?