What is the speed of fast forward or rewind an mp3?

What is the speed of fast forward or rewind an mp3?
I often lisen 3 hour MP3 and with my old mp3 player I takes a lot of time forward or rewing 1 hour.
Does anybody know how takes around forward or rewing 1 hour?
Thnaks very muchs.

Well, I have bought one today.
As if someone else interested in:
1) Nano 6th use a slide bar, so you can move instantly to anywhere. The accuracy in a 2 hour 30 minutes is aprox. one minute by one minute (minimun)
2) If you use the forward button, you can lisen while you move forward. The speed is aprox:
     10 sg = 5 min.
     20 sg = 11 min
     30 sg = 17 min
Thanks  :-(

Similar Messages

  • IS it possible to speed up (fast forward) motion in imovie?

    IS it possible to speed up (fast forward) motion in imovie?

    … sure:
    • select clip
    • in the Menu/Clip you'll find Fast Forward, 2x, 4x, 8x, 20x ........

  • What's the speed of mackbook pro HD link? is it ATA100? is Fireface 400

    What's the speed of mackbook pro Hard drive link? is it ATA100? is Fireface 400/800 faster than the link of the macbook pro hard drive?
    I'm a recording artist. I'll use my macbook pro to record sounds, because my macbook pro 's disk is too small, I deceide to buy a fireface 800 hard drive like Lacie. Is it ok to record sounds in logic directly into the fireface 800 hard drive? or it's still better to record sounds into macbook pro's Hd.
    which one is faster anyway?
    Thanks!

    It makes little difference whether the drive is SATA 1.5 or 3.0 because the MBP controller only supports SATA 1.5. SATA 3.0 drives will work but simply not at the faster speed.
    The FW800 interface is capable of up to 100 MB/s interface transfer rates. The hard drives however are not able to achieve that speed in typical real world throughput. The most expensive high speed SATA drives (3.5", 7200 or faster RPM) may come close to saturating the FW800 bus. But smaller notebook drives (2.5") will not. So if you plan to use a notebook sized external drive just get one that will suit your storage needs. If maximizing throughput is important then get a 7200 RPM SATA notebook drive and put it in a FW800 enclosure. Be sure to get an enclosure that uses the Oxford chipset.
    You can find suitable enclosures at:
    MacSales.com
    CoolDrives.com
    WiebeTech.com
    CalDrives.com
    FirewireDirect.com
    Good sources for drives are MacSales.com, Buy.com, and NewEgg.com.

  • What is the speed capabilities of the 3 gn time capsule ?

    What is the speed capabilities of the 3 gn time capsule ?
    i'm increasing the input to 30 MBS

    1,000 Mpbs using Ethernet, about 300 Mbps using wireless.
    Your 30 MBS connection is likely 30 Mbps, not MB. Huge difference.
    Mbps is the standard measurement that most service providers use to describe the speed of their service.

  • I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

    I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

    I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

  • What are the speeds like?

    Hi guys, im currently on o2 broadband and its slow as and im looking to upgrading to infinity in july when its in my area (guildford) and i want to ask what are the speeds like when playing on xbox live, psn, downloading torrents and downloading from file upload sites such as megaupload ect. most of the usage of our home internet is used as online gaming and downloading from file upload sites. We rarely use torrents.
    Thank you!

    You would like a Graphic off me???????????? Having said that I've just checked and for some reason Fri & Sat has gone up to 28ms. I've got lots of graph's to show this but it would take up to much space on here. This is my dashboard so you can see.:-
    iechyd da
    sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

  • What are the speeds of the USB Stick?

    I've bought a USB Memory Flashdrive, its the USB2.0 2GB..
    Can anyone tell me why I can't use this USB Stick for ReadyBoost?
    What are the speeds of the USB Stick?
    Kind regards

    and for people who haven't heard about Windows Vista ReadyBoost:
    http://blogs.msdn.com/tomarcher/archive/2006/06/02/615199.aspx
    Q: What perf do you need on your device?
    A: 2.5MB/sec throughput for 4K random reads and 1.75MB/sec throughput for 512K random writes
    My speeds according to the site in the post above:
    Reading speed:
    8 MB/s (max.)
    Write speed:
    4,8 MB/s (max.)
    Speed USB port:
    60x / 2.0
    this is all according to this site, I was looking for official details on the Toshiba site but couldn't find any so here I am...

  • My i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch

    my i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch. can you help?

    Try the standard fixes:
    - Rest. Nothing is lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defauslts/new iPod.

  • When will the ip channel fast forward /rewind get ...

    I was hoping that this long awaited update would Fox the fast forward and rewind of Internet channels to function the same as normal channels but no such luck.
    This is so annoying it fast forwards a full minute but then rewinds in like 15 seconds intervals.
    Is this being worked on?
    On a happier note I love that the record light comes on when the box is in standby now.

    The info we got was that this won't change as the coding the ip channels use can't be decoded fast enough for visible ff and rew, so I wouldn't hold out too much hope for this ever changing. I actually find going forward in 1 minute chunks works better than the visual ff as I always miss the start and have to rew again and for large jumps just stop the play and move fast up the timeline or input the exact minutes

  • New setup with promise what is the speed ?

    We are building a new Xsan setup. This is the my setup
    2x Metadata Server 2.8 GHZ 4 Gb Ram model mid 2008 OS 10.5.7
    1x OpenDirectory OS 10.5.7
    Fiber channel Switch
    3x Qlogic 5600 4Gb voor storage en servers
    Metadata network not connect to public network
    1000 Gb Cisco
    Plublic network
    100 GB switch
    Storage
    2x Promise VTrak E-Class 16x SATA with latest firmware
    Configuration with the scripts for the Apple support site.
    Xsan Version
    Servers 2.11
    Client’s 1.4.2 and 2.11
    The servers and the 2.11 client’s have a 2x 4 Gb connection to the Xsan.
    We are using xSAN for FinalCut Pro and FinalCut Server.
    My question is what can I expect form the speed of the Xsan. What is the total bandwidth of the xSAN. And what is the speed of a single client. And what is the best way to measure the speed.
    Who has a same setup and what is your speed on the xsan.
    Thanks for the help.
    Greetings,
    Gunnar

    We are building a new Xsan setup. This is the my setup
    2x Metadata Server 2.8 GHZ 4 Gb Ram model mid 2008 OS 10.5.7
    1x OpenDirectory OS 10.5.7
    Fiber channel Switch
    3x Qlogic 5600 4Gb voor storage en servers
    Metadata network not connect to public network
    1000 Gb Cisco
    Plublic network
    100 GB switch
    Storage
    2x Promise VTrak E-Class 16x SATA with latest firmware
    Configuration with the scripts for the Apple support site.
    Xsan Version
    Servers 2.11
    Client’s 1.4.2 and 2.11
    The servers and the 2.11 client’s have a 2x 4 Gb connection to the Xsan.
    We are using xSAN for FinalCut Pro and FinalCut Server.
    My question is what can I expect form the speed of the Xsan. What is the total bandwidth of the xSAN. And what is the speed of a single client. And what is the best way to measure the speed.
    Who has a same setup and what is your speed on the xsan.
    Thanks for the help.
    Greetings,
    Gunnar

  • Ipod 123 update no fast forward or rewind

    Since I updated my ipod firmware to v. 1.2.3 I can no longer fast forward or rewind music or audio podcasts with the fwd / back buttons or using the scrolling timeline. What's happening?

    I am having this issue as well. I just upgraded to version 1.2.3 on my 30GB iPod video two days ago. I found while listening to my podcasts on the way to work today that I could no longer fast-forward or reverse. When I tried to do so, it started the audio over from the beginning and from there became completely unresponsive as far as advancing or reversing was concerned.

  • Why can I no longer use my headphones remote to fast forward or rewind music videos on iPhone since upgrading to ios7?

    Why can I no longer use my headphones remote to fast forward or rewind music videos on iPhone since upgrading to ios7?

    The YouTube app is not included in iOS 6 (I think because the licensing agreement with google ended). You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or (if this isn't the version that you have tried) try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

  • Crash when fast-forward or rewinding in videos

    My 5G 80GB crashes when fast-forward or rewinding while playing a video. I can fast-forward about 5 times, then it crashes and I can't fast-rewind, it crashes the first time I try it. My videos are 5 minutes or 30 minutes in length and it doesn't matter which I play :/
    I also noticed that when I play a video without fast-forwarding or anything, the iPod crashes at the end of the video...
    Any suggestions? I'd really like to use that feature on my iPod, with the click wheel it is so comfortable to do that.

    Thanks for your fast reply!
    And sorry for my late response...
    I've tried the Five Rs multiple times, they didn't help. I also tried those sample videos, although only 3 of them can be played on the ipod: sample_iPod, sample_iTunes and sample_mpeg4... my iPod doesn't crash in these videos... I used this program to convert my videos for my iPod: http://www.ipod-video-converter.org/
    I used mpeg4 compression.

  • Subtitle buttons - fast-forward and rewinding issue

    I am new to DVD Studio Pro 4 and I have project that uses a subtitle button over a video track to provide users with the ability to go "back" to the previous menu - the menu in which they selected the track.
    There is a problem using this method however, when fast-forward or rewind is pressed, then the track starts to play again, the back button is now hosed. My thought is that this is because of the chapter markers not being refreshed in the middle of a subtitle, only at the begining and end like bookends.
    Is there a way around this? If not, are there any buggy issues with locking down the user controls for fast-forward and rewind? Any help would be much appreciated...
    -charlie

    You can lock out the User Ops for Fast Forward Rewind or whatever you want. Probably a good idea if you are using the track as a menu effectively.
    If however the track is amovie and you want them to go back to the menu where they selected it you can target the menu for any track to go back to a specific menu. Click on the track and check out the Inspector near the bottom where it syas Remote Control. Target the menu you want people to go to back to when they press Menu on their Remote
    Steve Kirkham

  • Fast Forward and Rewind keyboard shortcuts in Log and Capture

    In FCP, I want to assign the Fast Forward and Rewind buttons (in the Log and Capture mode) to buttons on the keyboard. I've assigned the functions using the Keyboard Layout in the Tools menu but it doesn't seem to be working like it should. In Log and Capture when I use the mouse to press the Fast Forward button, FCP stops the miniDV deck and fast forwards the tape as fast as possible without showing any picture. However, when I invoke the keyboard shortcut I created all I get is the picture moving a few fames per second instead of the tape stopping and fast forwarding as fast as possible. The same happens with the Rewind keyboard shortcut as well. Any ideas as to why, and how I might be able to fix this?
    The computer I'm currently working on is a Dual 2 GHz PowerMac G5, 2.5 GB RAM, Final Cut Studio (Final Cut Pro 5.0.4).
    –Michael
    Message was edited by: Michael Starks

    When I press the fast forward or rewind button while logging a miniDV tape the video stops and then the tape fast forwards or rewinds at a MUCH faster rate than L or J ever give me. That is the behavior I am trying to get from a keyboard shortcut.
    Not possible via keyboard shortcuts, unfortunately.
    Even if you map the Rewind and Fast Forward functions to keys in a Custom Keyboard Layout - for those who didn't know, yes, there are specific commands for those functions even though they are not mapped by default - those shortcuts will not within the L&C window. We're stuck pressing the buttons.
    Forgot to mention: the only time you're able to invoke the true fast forward or rewind function is using Shift-I/O (that is, Go to In Point or Out Point). Of course that only works if you have the necessary In/Out point set...

Maybe you are looking for

  • Pictures are gone after iOS 8 update

    After the iOS 8 update, I went to my picture gallery and all but 43 of my pictures are gone. I've gone to Photos --> Collections and still, only those 43 images are there. Where did my pictures go and how do I get them back?

  • Creation of condition table without copy

    During creation of Condition table ( without copying any condition from available tables), Is it possible to see all field catalouges available? and if possible then how can we see all fields available to add desired ones into our table?

  • SSIS package flow based on a scheduling configuration table.

    I have a table called Tbl_Scheduler. This scheduler table contains scheduler id ,scheduler description,as shown below. 1  ,Runs between 10 th of current month and 20th of current month 2  ,Runs at last day of the month 3  ,Runs at first day of the mo

  • How to get the name and the path of the font used in photoshop (not textItem.font)

    I'm trying to get the real name of the font and the path, is there a "easy" way to do it ? i need to get the font file (*.ttf or *.otf) and copy to the same directory as the psd file, that's why textItem.font doen't work for me. thanks in advance

  • Performance issue when inserting into spatial indexed table with JDBC

    We have a table named 'feature' which has a "sdo_geometry" column, and we created spatial index on that column, CREATE TABLE feature ( id number, desc varchar, oshape sdo_gemotry) CREATE INDEX feature_sp_idx ON feature(oshape) INDEXTYPE IS MDSYS.SPAT