What is the standard component configuration for tuition fee reimbursement in sap webdynpro?

what is the standard component configuration for tuition fee reimbursement in advance claims in hrms in webdynpro?

Hi Debo,
What is your exact requirement?
Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
sample:
Regards,
Rama

Similar Messages

What is the standard print prg for Purchase Order

Hi,
I am working on forms, what is the standard print program for purchase order.
Already i have gone to nace and found that the program assigned to the customized print prg, so i am not able to find out the print program, so can u tell me how to solve it.
Regards,
clara

Here are the default entries in the configuration
NEU     Purchase order     1     SAPFM06P     ENTRY_NEU     MEDRUCK
NEU     Purchase order     2     SAPFM06P     ENTRY_NEU     MEDRUCK
NEU     Purchase order     6     RSNASTED     EDI_PROCESSING
NEU     Purchase order     A     RSNASTED     ALE_PROCESSING
Regards,f
Ravi
Note : Please mark the helpful answers

What is the best RAID configuration for a MacPro as a Logic User?

There ought to be a universal answer to this question: what is the best RAID configuration for Logic Mac Pro users? I will be more specific.
I use Logic Studio, Reason, Ableton, and Motu Symphonic Instrument simultaneously.
I want to fail safe my precious audio files and improve performance as the system reads/writes data from multiple files, from audio tracks to digital samples.
I want to run video files simultaneously to do nifty audio soundtracking to video.
Here is the configuration I have in mind.
HD 1: OS and Logic Studio, Reason/Ableton samples etc. software (non-raid) (250 GB)
HD 2/3: MIrrored RAID set for AUDIO FILES (500 Gb identical pair)
HD 4: Video files / Bouncing (1 TB)
Makes sense right? A disk for reading software. A pair of 500 GB disks for reading/writing audio files and sessions in mirrored array. A 1 TB disk for video and bouncing. The main question I have is, for audio files only, is striped or mirrored better? 64K blocks the best? And are there any more details. I assume to do this in Disk Utility.

Well, both Mirrored and Striped have their pros and cons. If you use mirrored, it will offer no better performance than the spec'ed drive along with it's sata bus speed. The plus point is, if one drive goes down, you have the second as a backup as the complete contents of one drive are mirrored on the other.
With striped you will get a performance boost because all files (for example a single project) will get written across both drives and hence split the load on the drives and the SATA busses. The drawback is that you'll have to make sure you have a good, regular backup schedule in place because when one of the drives goes to drive heaven, you're going to be stuffed without a full backup of both drives.
Exactly what performance boost you'd get will depend on your project, number of files, size of files, fragmentation of files, track count etc. You may find it would be easier to use the 3 drives straight, with no raid and have:
HD 1: OS and Apps. No samples at all.
HD2: Audio Files for Logic projects
HD3: Reason, Ableton, Logic etc instrument sample library
HD4: Video and bouncing.
Which is what I ended up doing although I use HD4 as an interchangeable backup for HD1 and 2.
There is no universal answer to this as each must make their own choice based on their preferences and needs. Mirrored will give you full backup but on-site, in machine backup. Not much good if something untoward and drastic happens to the physical machine. I think a few people toy with striped RAID but fall on the side of using the drives straight, as in their projects they don't see a big enough gain over splitting the data across your 3 remaining drives without RAID. Studios that seriously consider raid often go out and get a dedicated raid that can offer more variations than raid 0 or raid 1 (Striped and Mirrored) and better throughput.
I hope this helps a little and not just added to the dilemma.

What is the standard class used to create SALES ORDER in SAP CRM?

Hello Experts,
Can anyone suggest me what is the standard class used for creating sales order.
I have created sales order using the BAPI 'BAPI_SLSTRANSACT_CREATEMULTI' in my report program.
Now, I have to create sales order using standard classes and methods(my assignment).
Please suggest the suitable class.
Regards
DNR Varma

Hi Varma,
You can create crm documents like sales order using BOL interfaces.
You can check one example at the following thread:
Create OrderThro BOL
Check if it helps you a little more.
Kind regards,
Garcia

What is the standard inbound idoc for substation management?

Hello Experts,
Can anybody help me to find out the standard inbound idoc for substation management?
The following field are requied to be filled in idoc.
1)Power_Produced(STAGR)
2) Reduction_Power_Consumed(STAGR)
3)Ancillary_Power_Consumed (STAGR)
4)Unit (MEINB)
5) UOM and Date (BUDAT)
If possible please tell me the standard BAPI for these fileds.
Thanks in advance for your help.
Thanks and Regards,
Suresh.

Hi Debo,
What is your exact requirement?
Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
sample:
Regards,
Rama

What are the standard Solutions available for Complaints Management in CRM?

Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.

You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin

What is the best system configuration for a video editing telecast quality using Adobe PRemier pro

We need an editing suite for telecast quality for our church.
What is the best system configuration please?
What are all the requirements to set it up ?

Buy a Desktop Video Editing PC http://www.adkvideoediting.com/
Build a Desktop Video Editing PC
-http://ppbm7.com/index.php/tweakers-page
-3 price level ideas in http://www.pacifier.com/~jtsmith/ADOBE.HTM
-what PC to build http://forums.adobe.com/thread/947698
-2 how to build videos http://forums.adobe.com/thread/1104182
-another video http://forums.adobe.com/thread/1145366
-another video http://forums.adobe.com/thread/1132363
-planning & Building http://ppbm7.com/index.php/intro-part-1
-memory for LGA2011 http://forums.adobe.com/thread/1098759
-an Adobe FAQ http://forums.adobe.com/thread/878520
-http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
-http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge
+E/0xe9b142f408a2b03ab88144a434e88de7.aspx
-several more links http://forums.adobe.com/thread/815798
-build tuning http://ppbm7.com/index.php/final-results

What is the standard business content for BCS on bw3.5?

Hi all,
Can anyone let me know the standard business content for Bcs on bw 3.5?
Thanks
Pooja

You can find this in the delivered business content under SEM > Business Consolidation System (BCS).

[SOLVED] What is the minimum .reg configuration for monting eMMC2??

Hello Friends,
Greetings for the day!!
As, I have a board that contains the eMMC2(slot=3). We have made some changes in the driver for make it capable for slot=3. Now, the turn of .reg files. We have made all the required entries for Driver\BuiltIn\SDHC3. And driver is taking the values correctly.
Now the part of remaining entries related to file system, profiles, partition, partition table etc
I have made entries are as -
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
"AutoMount"=dword:1
"AutoPart"=dword:1
"AutoFormat"=dword:1
"MountFlags"=dword:1
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll";; -- Required
"Folder"="";; -- Required
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC]
"Name"="MMC Card"
"Folder"="MMC_CARD" ;MC Card
"AutoMount"=dword:1
"AutoPart"=dword:0
"AutoFormat"=dword:0
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC\FATFS]
"Flags"=dword:14
"FormatTfat"=dword:1
"DisableAutoScan"=dword:1
"FormatNumberOfFats"=dword:2
"EnableWriteBack"=dword:1
;;"CheckForFormat"=dword:1
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC\Part00]
"Folder"="MMC_Part"
"AutoPart"=dword:1
"MountPermanent"=dword:1
;; "AutoMount"=dword:1
"BootPhase"=dword:1
"MountHidden"=dword:1
"MountAsBootable"=dword:1
"MountAsRoot"=dword:0
"MountSystem"=dword:1
"AutoPart"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\Autoload\fsdmgr]
"Dll"="fsdmgr.dll"
"Paging"=dword:1
"LoadFlags"= dword:1
I have read lot of document related to the issue that eMMC2 is not mounted for most of the persons. In every document I have observed that they are using different keys and keys values.. I am confused that what is the minimum keys and keys values required
for the eMMC2 to be mounted apart from driver level.... ???
With this values my logs are as -
13525 PID:400002 TID:2300006 SDBusDriver: The SDIO card does not support block mode. Use Soft-Block instead.
13527 PID:400002 TID:4bc0002 AddFonts(.ttf) returned 4 fonts
13527 PID:400002 TID:4bc0002 AddFonts(.ttc) returned 0 fonts
13528 PID:400002 TID:4bc0002 AddFonts(*) returned 4 fonts
13529 PID:400002 TID:4bc0002 AddAllEUDCFonts(tte) returned 0 fonts
13531 PID:400002 TID:2300006 SetInterface MMCHS_HCTL value = F02
13531 PID:400002 TID:2300006 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 20000000 Hz, Actual : 19200000 Hz
13532 PID:400002 TID:2300006 The clock rate is set to 19200000
13533 PID:400002 TID:2300006 HandleAddDevice: LoadDevice type = 1, slot 0
13540 PID:400002 TID:2300006 OSAXST1: >>> Loading Module 'sdmemory.dll' (0x9E474C58) at address 0xEEB10000-0xEEB2A000 in Process 'NK.EXE' (0x8711FAD0)
PB Debugger Loaded symbols for 'C:\WINCE700\OSDESIGNS\ENVENTURE\ENVENTURE\RELDIR\PHYTEC_AM335X_BSP_ARMV7_DEBUG\SDMEMORY.DLL'
13591 PID:400002 TID:2300006 SDMemory: +SMC_Init
13591 PID:400002 TID:2300006 SDGetDeviceHandle: ActivePath: Drivers\Active\32
13593 PID:400002 TID:2300006 SDGetClientFunctions: +Init
13594 PID:400002 TID:2300006 SDGetClientFunctions: -Init
13596 PID:400002 TID:2300006 SDMemCardConfig: Card is high capacity (2.0+)
13596 PID:400002 TID:2300006 SDMemCalcDataAccessClocks: Tpd:f ns, Asynch: f ns, AsyncClocks:0 , SyncClocks: 1078591488, ReadTotal: 0, Write Factor: 1099109072 WriteTotal: 769230
13597 PID:400002 TID:2300006 SDMemory: Initialize: Using block transfer size of 64 blocks
13598 PID:400002 TID:2300006 SDMemory: Idle Timeout: 2000 Idle Power State: 2
13599 PID:400002 TID:2300006 SDMemory: Power Management Setup complete
13599 PID:400002 TID:2300006 SDMemory: -SMC_Init
13602 PID:400002 TID:8b0002 SDMemory: GetDeviceInfo - Profile = eMMC, length = 10
13602 PID:400002 TID:8b0002 SDemory: GetDeviceInfo - RegQueryValueEx(Profile) returned 2
13603 PID:400002 TID:8b0002 SDMemory: GetStorageID Insufficient buffer space
SDMemory: -GetStorageID
13608 PID:400002 TID:8b0002 Partition Part00 NumSectors=15106032
13608 PID:400002 TID:8b0002 MSPART!PD_OpenPartition: dwStoreId=AB543350, PartName=Part00
13617 PID:400002 TID:8b0002 CreateCache: Successful. Cache Size: 256 KB, Start: 6, End: 29453, CreateFlags: 2.
13619 PID:400002 TID:8b0002 CreateCache: Successful. Cache Size: 256 KB, Start: 29454, End: 15106031, CreateFlags: 2.
13627 PID:400002 TID:4bc0002 LogFontFromRegistry(SYSTEM\GWE\Menu\BarFnt), lfHeight = -12
13628 PID:400002 TID:4bc0002 LogFontFromRegistry(SYSTEM\GWE\Menu\PopFnt), lfHeight = -12
Anyone can tell me that what is the minimum .reg entries that is required to mount the eMMC2 ????

Hello Friends,
I am happy to intimate you that I have self solved the above problem with minimal configuration as shown below -
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
"AutoMount"=dword:1
"AutoPart"=dword:0
"AutoFormat"=dword:0
"MountFlags"=dword:0
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll";; -- Required
"Folder"="";; -- Required
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC]
"Name"="MMC Card"
"Folder"="MMC_CARD" ;MC Card
But, atleast you have to find the tool that format and create single partition as per your requirement ...

RE: what is the standard driver program for printing PO form in ECC 6.0EHP5

Hi Guys,
For printing Purchase order smartform in MM module , earlier i used SMBA0 package i.e /SMBA0/AA_FM06P Driver program in Ecc 6.0 Ehp4 . But now my client is using Ehp5 ,here we could n't find SMBA0 package . So, can any one suggest me what is the relavant package for SMBA0 in Ecc 6.0 EHP5.
Thanks in advance.
Regards,
Bala.

Hi Bala,
Those are available in client 000, you have to copy these Smartforms and driver programs from client 000.
Client 000
Original program: /SMBA0/AA_FM06P
Original Form: /SMBA0/IN_MMPO
Regards,
Surya

What is the "right" laptop configuration for Engg Student

Hello All
I would like to get your perspective on getting " right" type of configuration for an Engineering student . Apart from solid performance & speed , battery life, portability is also a factor ..
Thanks a ton!
Ram

What sort of engineering are you doing?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

What is the Availability check relevant for batches in Std. SAP except CH

Hi,
What is the Availability check value in material master relevant for batches in standard SAP except CH.
As far as I know CH will enable to have automatic batch determination at sales order level. In the same manner, do we have any other availability check value in standard SAP like CH which will enable batch determination at delivery level.

Don't post the same question repeatedly. Keep one thread open and close the other threads.
You have already posted the same at Wha is batch relevant availability check value in standard SAP except CH
Regards,

What is the optimum core configuration for a new Mac Pro to process and manipulate very large (80 megapixel) images using PhotoShop and Camera Raw?

Hello:
I will be using creative techniques to process and manipulate a large number (hundreds) of very large (80 megapixel) images captured using a medium format digital back (Phase One IQ180).
Final output will be digital fine art imagery printed using an Epson 11880 at large sizes (up to 60 inches x ?), retaining the highest possible quality and resolution. I will be using Adobe CC PhotoShop and Camera RAW as well as Capture One software. PhotoShop filters will be used extensively.
The Mac Pro needs to be optimized for the above purpose and be useful for at least five years. I plan to max out all the other options (RAM, graphics cards, storage). Performance is more important than cost.
The few discussions I have found that mention optimum core configurations seem to lean toward 6 or 8 (but likely are not taking into consideration my need for manipulating a large number of very large files), so I am looking to this foum for opinions.
Thank you,
Kent

See if this helps
http://macperformanceguide.com/index_topics.html#MacPro2013

What is the best battery configuration for lenovo 420s

I read on the lenovo website that you can get up to 9 hours on the thinkpad 420s and I was wondering if anyone knew the battery configuration to achieve this setting? So far I only get up to 3 hours maximum IF I have it on very low performance. I usually keep it on maximum performance when it's plugged in. Anyone have any ideas?
Solved!
Go to Solution.

I would imagine that would be achieved using a 9-cell battery plus the supplementary battery that can replace the optical drive in the Ultrabay slot. http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...

What is the best backup configuration for a home lab?

Depends on your budget and complexity requirements. Offsite? Redundant? Free or paid? You also don't need a product to backup VM's and you can script this as well. Some good products that are free for a couple VM's are Veeam and Unitrends.

Hi there,
I am currently making a home lab environment to learn Microsoft technologies (at present), I wish to create a file server to store evaluation software, documentation and personal data. I currently use a total of 100GB of hard disk space for all this data...
How often do you recommend me backing up this data using Windows Server 2012 R2?
I also plan on implementing Volume Shadow Copy in the near future...
This topic first appeared in the Spiceworks Community

What is the standard component configuration for tuition fee reimbursement in sap webdynpro?

Similar Messages

Maybe you are looking for