What is the standard MPB battery capacity in mAh?
After looking into the technical side of my MBP, i saw that my full charge capacity was 6567 mAh.
I looked into this because it seemed as if my MBP's battery wasn't lasting as long as I thought it once was.
I have a 15" 2.2 gHz MPB
Thanks
The baseline full charge capacity varies with MBP variant. The easist way to find the baseline value is to get the free utility Coconut Battery:
http://www.coconut-flavour.com/
The baseline value is shown in the CB screen as "Design Capacity." There is a screen show on the download page showing the readouts.
Similar Messages
-
What is the normal MBP Battery capacity?
I have an approx. 1 month old MBP; the first battery was just replaced by Apple. I received the new battery on Friday and let it charge fully. On Friday evening, I turned on the MBP and saw that the battery showed "original capacity 5500, current capacity 5391 (fully charged)". I thought that a bit strange, so I decided to calibrate it following Apple's instructions. On Saturday, after fully charging it again, it showed "current capacity 5301". So, now the capacity is worse - ?
Before calling Apple, I'd like to know if it's normal to have a 5% capacity reduction within about 24 hours - at that rate, the battery will be dead shortly.
I'd appreciate any input/experiences with battery capacity.FIGURED IT OUT! My battery level reached 95% and the battery status said, "the battery is not charging"
I looked it up on apple support and found this very useful section in the Macbook Pro User's Guide:
"If the battery icon in the Finder menu bar is set to show the percentage of charge, you might sometimes notice that the battery does not attain a full 100 percent charge when the power adapter is attached. This is normal behavior; battery life is maximized if charging is not continuously cycled on and off when the battery’s charge capacity is between 95 and 100 percent. When the battery level eventually drops below 95 percent, it will charge all the way to 100 percent."
This fits with my problem. This macbook pro has been literally plugged in for well over a week!
So much for the "apple products are losing their quality" -
What is the standard battery life after charge
What is the standard battery life after charge?
About 1,000 full charge cycles. Mac notebooks- Determining battery cycle count - Apple Support.
-
What is the best external battery to use with a macbook pro retina?
Looking for the best option here. What is the best external battery to use with a macbook pro retina?
You should check your date of purchase against the manufacturer's warranty
or guaranty since some of those better brands have some recourse should
they fail within a specified time period. A good reason to save dated receipts.
Since solid-state USB drives probably don't (all) use a wear-leveling software
to equally utilize their recordable space evenly, it is possible that some of these
may exhibit a failure in some sector areas due to excessive over-writing. If the
ones you use do not have such a technology or an undercounted total capacity
with a means to automatically write in other sections, you may have to consider
manually using a disk utility to zero-overwrite and reformat them occasionally.
Even so, that may only help a marginal flash or thumb drive work a little longer.
Should a camera memory card fail you still may be able to attempt with margin of
success, to +recover image files+ from it. re: http://www.cgsecurity.org/wiki/PhotoRec
The standard default format they ship with works well for most file types; so if
you aren't moving OS X or Mac app specific files around on a USB flash drive,
the original format should be fine. Oh, you can use Disk Utility to attempt to do
a repair; but in some cases you may have to reformat them, etc.
{Some of the flash drive warranties or guarantees may vary from between regions;
so if you have one with a '5 Year' guarantee in the US, other rules may apply in EU,
or when you seek to replace an item under warranty outside of where it was bought.}
Good luck & happy computing! -
What is the best external battery for iphone 4s
what is the best external battery for iphone 4s
I bought the Mophie juice pack™ powerstation from the Apple store for $80. It has more then enough power to quickly boost the charge on my iPhone4S to an acceptable level. It requires the standard 30pin/USB Apple cord to plug into it.
But unless you need to charge your phone from 5-100%, this battery is overkill. It's a real hassle having the Apple cord connected to your phone whilst there's a battery in your pocket and you end up looking quite strange with your "corded" smartphone.
I might recommend a battery case (Mophie has these), but they don't offer the protection that I need (I use a LifeProof case). Instead I would buy a smaller Mophie juice pack™ reserve (keychain, direct plug) to get out of a bind and then charge up your iPhone in the car, wall, airplane, etc.
My only concern with the above (direct plug batteries) is that the slightest bump and the battery becomes a lever that could break the 30 pin plug on your phone, just like that warily flimsy feeling when you put an iPhone in a dock.
Hope that helps, at least in the Mophie department! -
What are the standard Solutions available for Complaints Management in CRM?
Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin -
What is the STANDARD Web Template in BI 7.0?
Hello guys,
Do you know what is the Standard Web Template in BI 7.0?
Today we only use Workbooks and the java is already installed.
Do we have to do some configuration in this Web template for our first execution?
Thank you,
Carlos EdaurdoHi,
0ANALYSIS_PATTERN is the standard Web template for the BI Queries when executed through Web.
We can copy this template to a Ztemplate and make the changes necessory based on project need and can be assigned
as default in Configuration settings .
Thanks,
Prakash -
What are the standard IDOC's available in IDES? where can i see in IDES?
Dear All,
Can any body let me know what are the standard IDOC's available in IDES? What is the path for the same?
Thanks in advance for replies
regards
srikanthHi,
IDOCs are intermediatery Documents, we can check for IDOCS using Tcode
WE01 : Create IDOC
WE02 : Display IDOC
WE19 : Reprocess IDOC
etc
Thanks
Kalyan -
Invoice list: What is the standard setting for output type LR00 ?
Hello all,
They have messed up our system. What are the standard settings for output type LR00 ?
Program RVADIL01,
Form ??
Thanks
RadDear Rad,
> Program RVADIL01,
> Form - SD_INVOICE_LIST
Thanks,
Raja -
What are the standard functions in XI ?
What are the standard functions in XI ?
Hi,
The target field mapping is possible by using below typs of functions
1. Standard functions
2. Runtime procedure
3. User Defined functions
Standard functions are the APIs provided in Graphical mapping to process the values of the fields used for target field mapping.
Technically all these values are trated as string thus all standard functions expect strings as input argument and string as an export aurgument
Please find here with you more details about it at below link
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
2. Runtime procedure
http://help.sap.com/saphelp_nw04/helpdata/en/3d/24e15bf9d79243b45d49b13b03de8f/content.htm
3. User Defined functions
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Thanks
Swarup -
What is the standard class used to create SALES ORDER in SAP CRM?
Hello Experts,
Can anyone suggest me what is the standard class used for creating sales order.
I have created sales order using the BAPI 'BAPI_SLSTRANSACT_CREATEMULTI' in my report program.
Now, I have to create sales order using standard classes and methods(my assignment).
Please suggest the suitable class.
Regards
DNR VarmaHi Varma,
You can create crm documents like sales order using BOL interfaces.
You can check one example at the following thread:
Create OrderThro BOL
Check if it helps you a little more.
Kind regards,
Garcia -
What is the standard print prg for Purchase Order
Hi,
I am working on forms, what is the standard print program for purchase order.
Already i have gone to nace and found that the program assigned to the customized print prg, so i am not able to find out the print program, so can u tell me how to solve it.
Regards,
claraHere are the default entries in the configuration
NEU Purchase order 1 SAPFM06P ENTRY_NEU MEDRUCK
NEU Purchase order 2 SAPFM06P ENTRY_NEU MEDRUCK
NEU Purchase order 6 RSNASTED EDI_PROCESSING
NEU Purchase order A RSNASTED ALE_PROCESSING
Regards,f
Ravi
Note : Please mark the helpful answers -
What does the standard program RFBIBL00 does?
what does the standard program RFBIBL00 does?
Hi Bharath
Accounting Documents: Data Transfer Workbench
Definition
Transferring FI accounting documents from an external system into the SAP System using program RFBIBL00.
Use
You use program RFBIBL00 to enter accounting documents and to clear open items.
Method
Program RFBIBL00 primarily transfers accounting documents using the batch input method. However, you can also generate documents immediately using call transaction or direct input by means of the "Data transfer type" parameter. Both of these procedures lead to improvements in system performance when transferring large quantities of data (more than 10,000 transactions).
Object-Specific Settings
With call transaction or direct input, documents are posted immediately to the SAP System. As a result, you need to ensure that if for any reason the program is terminated, it can be restarted without inconsistencies occurring in the data.
other information:
To enhance the batch input procedure, the system offers the direct input technique, especially for transferring large amounts of data. In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not process screens. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or Transaction BMV0.
Examples for direct input programs are:
Program Application
RFBIBL00 FI
RMDATIND MM
RVAFSS00 SD
RAALTD11 AM
RKEVEXT0 CO-PA
Hope this helps u
thanks and regards
suma sailaja pvn -
What is the standard format of jdbc url?
Hi,
What is the standard format fo the
jdbc url?
Thanks
WasiqHI,
It's well described in help,
for EP 6.0 and BW 3.5: http://help.sap.com/saphelp_nw04/helpdata/en/27/6c013a53271a05e10000000a11402f/frameset.htm
for EP 7.0 and BI 7.0 is more difficult, but You have a wizard:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/ef05462480025ae10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
Regards,
Jarek -
What is the standard method to integreate with AME for the approval process
I have developed a new OAF page and registered under Employee Self Service menu.
What is the standard method to integreate with AME for the approval process.
Appreciate your early responseAny one used AME with the new OAF pages?
Please share , how you use AME with OAF page
Maybe you are looking for
-
My devices (Mac Pro, iPad
Until today my Mac Pro, iPad and iPhone (3Gs) have been sync'ing with iCloud. Today my iCloud calendar, phonebook and email are all empty. The information on my devices is intact. New information still sync's between my devices but does not show u
-
Yes, that solved the problem, but clicking on that didn't work.
A reply was sent to my email, but clicking on the line saying my problem was solved led only to a "cannot find the server". So I went to Mozilla site and signed in, but there was nothing in my inbox there. So I am sending the contribution to 650 Cast
-
Exception Queue cleanup.
hi all, i am using oracle 9i. is there a way to automatically remove messages from the exception queue? if so, what determines when this removal occurs? Thanks ahead, Lior.
-
How to move music from one computer to another???
I have windows xp on one computer and vista on this one...how do i move the music from the one with xp to this one??? burn it to a cd?? put it to my ipod??? i tried emailing the music to myself, but its taking forever
-
Differences between COM & JavaScript Scripting
Hi all, I have to make a sort of script that populate an InDesign document with some data from a database. I can do it with a Web Service called in Javascript or in C# with COM. Do you know the differences between COM and Javascript scripting ? What