What is the standard Video Preview Dimensional size of Webinar?

Please anybody tell me what is the standard video preview size of webinar? I mean pixels x pixels
Regards
Abhishek Thakur

It matches the media that you are editing.

Similar Messages

What is the best video converter for high quality MPEG-4 for Apple TV?

What is the best video converter for high quality MPEG-4 for Apple TV?

Handbrake won't convert AVI files, But there are many more than those mentioned that will
The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
Message was edited by: Winston Churchill

I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

What is the photo, video, music capacity of the 16 gb ipad 2?

What is the photo, video, music capacity, etc. of the 16 gb ipad 2. How do I compare it to the 32 gb ipad 2 to choose which one meets my needs?

Videos, photos, music files vary in size.
There is no real way to give you any accurate number.
My personal music library is 966 files, 6.81 gb.
One entire season of a 45 minute tv show, 22 episodes from iTunes is 10.96gb.
Draw your own conclusions.

What are the standard Solutions available for Complaints Management in CRM?

Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.

You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin

What is the STANDARD Web Template in BI 7.0?

Hello guys,
Do you know what is the Standard Web Template in BI 7.0?
Today we only use Workbooks and the java is already installed.
Do we have to do some configuration in this Web template for our first execution?
Thank you,
Carlos Edaurdo

Hi,
0ANALYSIS_PATTERN is the standard Web template for the BI Queries when executed through Web.
We can copy this template to a Ztemplate and make the changes necessory based on project need and can be assigned
as default in Configuration settings .
Thanks,
Prakash

What are the standard IDOC's available in IDES? where can i see in IDES?

Dear All,
Can any body let me know what are the standard IDOC's available in IDES? What is the path for the same?
Thanks in advance for replies
regards
srikanth

Hi,
IDOCs are intermediatery Documents, we can check for IDOCS using Tcode
WE01 : Create IDOC
WE02 : Display IDOC
WE19 : Reprocess IDOC
etc
Thanks
Kalyan

What is the best video converter for DVD to iMovie? Either free or to purchase.

What is the best video converter for DVD to iMovie? Either free or to purchase. And one that is 'fool-proof' and very easy to use. Many thanks, anyone who can advise.

You want to 'reverse engineer' the compressed mpeg2 DVD file back to something iMovie can use?
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Invoice list: What is the standard setting for output type LR00 ?

Hello all,
They have messed up our system. What are the standard settings for output type LR00 ?
Program RVADIL01,
Form ??
Thanks
Rad

Dear Rad,
> Program RVADIL01,
> Form - SD_INVOICE_LIST
Thanks,
Raja

What are the standard functions in XI ?

What are the standard functions in XI ?

Hi,
The target field mapping is possible by using below typs of functions
1. Standard functions
2. Runtime procedure
3. User Defined functions
Standard functions are the APIs provided in Graphical mapping to process the values of the fields used for target field mapping.
Technically all these values are trated as string thus all standard functions expect strings as input argument and string as an export aurgument
Please find here with you more details about it at below link
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
2. Runtime procedure
http://help.sap.com/saphelp_nw04/helpdata/en/3d/24e15bf9d79243b45d49b13b03de8f/content.htm
3. User Defined functions
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Thanks
Swarup

What is the standard class used to create SALES ORDER in SAP CRM?

Hello Experts,
Can anyone suggest me what is the standard class used for creating sales order.
I have created sales order using the BAPI 'BAPI_SLSTRANSACT_CREATEMULTI' in my report program.
Now, I have to create sales order using standard classes and methods(my assignment).
Please suggest the suitable class.
Regards
DNR Varma

Hi Varma,
You can create crm documents like sales order using BOL interfaces.
You can check one example at the following thread:
Create OrderThro BOL
Check if it helps you a little more.
Kind regards,
Garcia

What is the standard print prg for Purchase Order

Hi,
I am working on forms, what is the standard print program for purchase order.
Already i have gone to nace and found that the program assigned to the customized print prg, so i am not able to find out the print program, so can u tell me how to solve it.
Regards,
clara

Here are the default entries in the configuration
NEU     Purchase order     1     SAPFM06P     ENTRY_NEU     MEDRUCK
NEU     Purchase order     2     SAPFM06P     ENTRY_NEU     MEDRUCK
NEU     Purchase order     6     RSNASTED     EDI_PROCESSING
NEU     Purchase order     A     RSNASTED     ALE_PROCESSING
Regards,f
Ravi
Note : Please mark the helpful answers

What does the standard program RFBIBL00    does?

what does the standard program RFBIBL00    does?

Hi Bharath
Accounting Documents: Data Transfer Workbench
Definition
Transferring FI accounting documents from an external system into the SAP System using program RFBIBL00.
Use
You use program RFBIBL00 to enter accounting documents and to clear open items.
Method
Program RFBIBL00 primarily transfers accounting documents using the batch input method. However, you can also generate documents immediately using call transaction or direct input by means of the "Data transfer type" parameter. Both of these procedures lead to improvements in system performance when transferring large quantities of data (more than 10,000 transactions).
Object-Specific Settings
With call transaction or direct input, documents are posted immediately to the SAP System. As a result, you need to ensure that if for any reason the program is terminated, it can be restarted without inconsistencies occurring in the data.
other information:
To enhance the batch input procedure, the system offers the direct input technique, especially for transferring large amounts of data. In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not process screens. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or Transaction BMV0.
Examples for direct input programs are:
Program        Application
RFBIBL00         FI
RMDATIND       MM
RVAFSS00       SD
RAALTD11        AM
RKEVEXT0       CO-PA
Hope this helps u
thanks and regards
suma sailaja pvn

What is the standard format of jdbc url?

Hi,
What is the standard format fo the
jdbc url?
Thanks
Wasiq

HI,
It's well described in help,
for EP 6.0 and BW 3.5: http://help.sap.com/saphelp_nw04/helpdata/en/27/6c013a53271a05e10000000a11402f/frameset.htm
for EP 7.0 and BI 7.0 is more difficult, but You have a wizard:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/ef05462480025ae10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
Regards,
Jarek

What is the standard method to integreate with AME for the approval process

I have developed a new OAF page and registered under Employee Self Service menu.
What is the standard method to integreate with AME for the approval process.
Appreciate your early response

Any one used AME with the new OAF pages?
Please share , how you use AME with OAF page

What is the standard Video Preview Dimensional size of Webinar?

Similar Messages

Maybe you are looking for