What is the start frequency for the digitizer 5142

Dears,
what is the start and stop frequency of the digitizer 5142 which is 100MS/s?

Hello Ahmed.Abdulbaky,
When you say “start” and “stop” frequencies, I assume that you are inquiring about the maximum and minimum sampling rates of the 5142 digitizer. Is this correct? If so, then take a look at page 13 of the NI PXI/PCI-5142 Specifications, and you will see under Real-Time Sampling that the minimum and maximum sampling rates are 1.526 kS/s and 100 MS/s, respectively.
To answer your question from your other post, yes, you can change the sampling rate of the digitizer through the NI-SCOPE API. If you are using LabVIEW with the device, there is a VI called “niScope Configure Horizontal Timing.vi” that you can use to set the sampling rate, by wiring the desired sampling rate to the min sample rate input. This VI can be found in the functions palette under Measurement I/O » NI-SCOPE » niScope Sonfigure Horizontal Timing.vi.
Chris_G
Sr Test Engineer
Medtronic, Inc.

Similar Messages

Changing the sampling rate of the Digitizer 5142

Dears,
Can i change the sampling rate of the digitizer 5142 ( for the 100MS/s can i change it to be smaller), can i change it at the spectrum mode and the IQ mode?

Thank you for posting on the NI Discussion Forums. Since this question is related to your other forum post, let’s move the discussion over there to answer this question.
Chris_G
Sr Test Engineer
Medtronic, Inc.

What is the Firefox start page looking for when it tells me I'm not using the most current version and need to update Firefox? The check for updates button says my version is up to date, but the start page disagrees. Is there a setting I need to adjust?

Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?

I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people.

What are the best approaches for mapping re-start in OWB?

What are the best approaches for mapping re-start in OWB?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
We have number of mappings. We built process flows for mappings as well.
I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
How do we re-cycle failed rows?
Are there any builtin features/best approaches in OWB to implement the above?
Does runtime audit tables help us to build re-start process?
If not, do we need to maintain our own tables (custom) to maintain such data?
How did our forum members handled above situations?
Any idea ?
Thanks in advance.
RI

Hi RI,
How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
What will happen if m3 fails?Process is suspended and you can restart execution from m3.
By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
Oleg

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.

What is the frequency response for the new iPhone 5 earbuds?

I have recently purchased a new iPhone 5 with iOS 6.0.1. I was wandering about the specifications of the new earbuds. What is the frequency response? Thank you for the information.

Apple has released 2 sets of earbuds with the iPhone 5 release. There are the earpods and also the in-ear headphones. Here are the in-ear headphones: http://store.apple.com/us/product/MA850G/B/apple-in-ear-headphones-with-remote-a nd-mic?fnode=49. The frequency response on these is 5kHz-21kHz. I was unable to find the earpods response for definite but the best response I got was 30Hz-16kHz. Hope this answers your question.

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
There is some info on these pages :
developer site : https://developer.apple.com
developing for iOS 7 : https://developer.apple.com/ios7/
developer support : https://developer.apple.com/support/
developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

What are the flat frequency settings for bass & treble knobs on X-Fi Elite Pro?

Ok, I have the X-Fi Elite Pro and I need to set its bass & treble levels (volume control panel) to a flat frequency response setting. I noticed that the default value given by creative is 50% for bass level and 50% for treble level. So, what is the flat frequency response setting for bass and treble knobs? 0% or 50%?
Kind regards
Message Edited by Hyperion on 11-14-2008 08:26 PM

Ok, I get the picture. The reason why I asked this question came up when I bought a new set of monitors (the Edirol MA-15DBK). I found out that after changing speakers (I had a set of Philips SPC-3208) the new ones were set to 0% boost/cut for bass/treble, but the sound came out quite bassy in an almost irritating level. So, I thought that maybe my card's bass levels were somewhat boosted. I guess now some lower frequencies are revealed, so I have to take care of my room acoustics. However the reviews for the Edirols gave low bass levels, so this gets more complicated. I am still in a 30-days trial, so maybe I will have a look at the Gigaworks T40 series II and I'll see what happens then...

I have had Itunes installed on my laptop for many years. I t started malfunctioning so I uninstalled it. I tried to reinstall and there is persistent error in installing . What is the problem ? How can I solve this?

"It started malfunctioning so I uninstalled it".
That may have been necessary, may not have.
"I tried to reinstall and there is persistent error in installing. What is the problem?"
No clue.. you've not provided us any details.
"How can I solve this?"
Search these forums or google for the error occurring or post the error so that others can help you.

My daughter is a college student. she needs to write and compile c programs on her mac for a class this semester. what is the best place for her to start to get the correct compiler etc. to use ? thanks

my daughter is a college student. she needs to write and compile c programs on her mac for a class this semester. what is the best place for her to start to get the correct compiler etc. to use ? thanks

If you know that you will not be asked to design GUI interfaces, and the C programming course will adhere to command line compilation environments, then get the Xcode command-line developer tools, and skip the extra complication of Xcode until you absolutely need it. Apple has kicked GNU C to the curb and is rightly so, using Clang/LLVM compiler technology.
Sign up for a free Apple Developer account using your Apple ID, and then visit the Mac Dev Center, and towards the bottom of the page, you will see additional downloads. Click on the associated, all down loads link. Know your OS X version beforehand, as the command-line tool releases are tied to general operating system versions, and the most recent Xcode version. That said, there are currently two March 9, 2015 command-line tools for Xcode 6.2 — one for OS X 10.9 Mavericks, and the other for OS X Yosemite.

At installation iTunes there is an error. An error of package Windows Installer. It is impossible to start necessary for end of installation the program. Address to technicians or to the supplier of a package. What to do?

At installation iTunes there is an error. An error of package Windows Installer. It is impossible to start necessary for end of installation the program. Address to technicians or to the supplier of a package. What to do?

Repair your Apple Software Update:
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install

My iMac 21.5 shuts down and doesn't restart. i need to unplug it for it to start again. what is the issue?

my iMac 21.5 shuts down and doesn't restart. i need to unplug it for it to start again. what is the issue?

Reset the SMC (System Management Controller), click here, read the notes and follow the directions.

What can I do to stop the pass word at start up for mac mini?

What can I do to stop the pass word at start up for mac mini?

Go to Settings>Security and Privacy>General and make sure the box that says "Require password....begins is not checked".

Often my iphone4 just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?often my iphone4 just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?

often my iphone4 just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

What's the best FM frequency to use for the Transm...

Hi all,
I'm having difficulty in getting my iPod car kit set up, so I am using my n900 for in car entertainment for the time being. Problem is that I can't seem to find a clear frequency to set the phone to use, so it doesn't keep picking up other stations whilst I am driving around.
I have just read that 87.5 is a good choice, as not many stations go that low. Problem is the n900 won't go that low, as far as I can tell.
Any suggestions?
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

The lower transmit frequency limit is in there to make the device meet FCC regulations.. that is a regulation imposed of US regions and, to a lesser extent, Latin american regions that border with the US.
In addition, you'll be pleased to know that the N900 will not use certain European WiFi channels if a) the sim card is removed or b) the phone has a sim card but is OUT of 3G coverage.. again, to make the device meet FCC regulations.. (seriously.. when you go out of 3G coverage, the kernel reports it is switching from EU wifi to US wifi!!)
Let me put this into perspective..
From: http://www.nokia.com/results/Nokia_results2009Q3e.pdf
Nokia sold 3.1million handsets in the US 2009 Q3
Nokia sold 27.1million handsets in Europe during the same period.. That is 9 times as many.
The USA has its OWN firmware
and yet ALL versions of the firmware (including the UK specific one) are crippled to meet the requirements of a region that produces the lowest sales figures by a factor of 3 (Latin America produced 9.7 million units in 2009Q3)
Why the HELL are we suffering because of US restrictions..
That's like saying you can't use bluetooth because it isn't allowed on the Christmas islands.. (it is allowed.. not picking on you, Christmas Islands, but you are small!)
If the FCC wants a phone that doesn't allow broadcasts on sub 88Mhz frequences, and doesn't want certain Wifi channels to be used, the ALTER THE US FIRMWARE..
What next, BMWs have with left hand steering in the UK because the US drives on the Left?
Phillips TVs that only work on 120V because the US uses 120V..
I don't give a **** what the FCC say.. I'm not in the US and I have my own european and UK legislation to adhere to..
For a company that INSISTS on having a billion regional firmware versions, they don't appear to be able to get that right either!!! The UK version lacks UK specific restrictions such as the ability to us UK frequencies for wifi and FM transmission!!
Crazy and very very irritating

What is the start frequency for the digitizer 5142

Similar Messages

Maybe you are looking for