What is the status of Facetime repair?

I have not been able to use Facetime for almost a week. What is the status?

You can check the status of Apple Services here http://www.apple.com/support/systemstatus/

Similar Messages

  • I don't understand correlation between ACL and dACL. If dACL is downloaded to the Catalyst switch what is the status of the ACL

    Understanding  ISE and dACL.
     I don't understand correlation between ACL and dACL.
     If dACL is downloaded to the Catalyst switch what is the status of the ACL attached to physical port. Is dACL appended to the existing ACL? When I typed ‘sh ip access-list int fa0/1’ I can see only dACL for access domain and dACL for voice domain appended to the previous dACL and no ACL lines.
     Regards,
    Vice

    Hi,
    Downloadable ACLs (dACL) are applied from your RADIUS server based on authentication and authorization policies.  It overrides any standard interface ACL.
    Standard interface ACLs are in place to limit traffic on the port before 802.1x or MAB authentication.
    When an authenticated session terminates on the interface the standard ACL will be re-applied until the next authentication.

  • What is the major advantage of Repair full request?

    Hi gurus
    What is the major advantage of Repair full request?
    Thanks in advance
    Raj

    Full Repair request is used when:
    1. During delta upload you have skipped some records and want them in your data target.
    2. When the delta load was not correct and you make a selective deletion and fetch the data for the same selection without disturbing the delta update.
    3. When at times you fail to have even full upload, then mark the request as repair request and you can get the full upload..(I have faced such a scenario)
    Assign points if useful.
    Regards
    Gajendra

  • What is the status of Quicken that will run in iOS5?

    What is the status of Quicken that will run on iOS5?

    http://quicken.intuit.com/support/help/is-quicken-software-compatible-with-the-i pad--ipod--iphone--or-android-/GEN83084.html
    http://quicken.intuit.com/support/help/install--register--and-convert/quicken-fo r-mac-compatibility-with-mac-osx-10-7-lion/GEN83208.html
    Parent Company
    https://www.mint.com/how-it-works/anywhere/iphone/

  • What is the status of Arch64

    What is the status of arch64 is it as stable as 32 bit arch distribution?
    What possibilities there are that makes arch64 able of running 32bit programs(especially 32b firefox with flash plugin)?

    creatid wrote:
    I am using 64bit firefox + flash without any issues. No 32bit software at all on my boxes.
    The only thing that I can't use yet is Skype. I can live without it because I can use my PSP for that :-)
    And Wine has no 64bit version yet, but so far I have no need for it.
    So for me the status of Arch x86_64 is: all systems go!
    frigaut wrote:yes, it works great. I run the 64 bits flash, and 32 bits skype with the 32 bits libraries.
    no significant issue. very stable. and, in my experience, faster than 32bits for heavy numerical calculations (even though you may not care and YMMV), which is important for my work.
    Guys:
    Following The Arch Way I usually do my research and try to resolve my own problems without bothering you with n00b questions, this way when I eventually found the way to fix that problems I post the explaination here so other green users like me can have it a little easier.
    Said that, I'm burned about making flash work (and usually multimedia) ok in KDE SC (4.4.3) on a Arch x64 system.
    Flash movies play well but with no audio when in GNOME -the other DE/WM I tried- flash run smooth. Any idea!? I installed flashplugin packet from extra, would help in any way using ndiswrapper?
    Running a fresh install of Arch x64 + KDE SC - installed yesterday, still tweaking some things.
    Last edited by martin77 (2010-05-15 17:03:46)

  • What is the status of AU 3.0? Upgrade to..? Supported ?

    What is the status of AU 3.0? Upgrade to..? Supported ?

    Sorry Mylenium, Adobe Audition 3.0 seems to be in some kind of Limbo with Adobe. Love the program, and was inquiring as to where it headed in the future.
    s
    Thanks to all those who serve
    Mike Marcum
    Audio Engineer
    Jewel Recording Studio

  • What is the status of the Moto X Android 4.4.4  update?

    What is the status of the Moto X Android 4.4.4 update?

    None of us customers know. The reps that roam this community forum won't know either.

  • My home button is not workingit seems to be indented into the iPod itself. would Apple fix that? if so, what is the approximated cost of repair?

    it seems to be indented into the iPod itself. would Apple fix that? if so, what is the approximated cost of repair?

    If under warranty and the iPOd is defective, Apple will replace the iPod ant no cost.  Otherwise they will excahnge the iPod for a refurbished one for a flat price depending upon the capacity, for a 4G it is $99, $149, or $199.
    If not under warranty:
    FIX for iPod Touch Home Button: Apple Support Communities

  • I have a 2013 macpro I upgraded to yosemite.  Now I find time machine does not work, nor my old back up using a click free wireless back up.  What is the status of time machine and yosemite?

    What is the status of time machine not working with yosemite?
    I upgraded mu mac pro to yosemite and since have found time machine does not work.
    Also, my old backup via a clikfree wireless backup does not work any longer.
    Is anyone working on this issue?
    Is there anyway I can backup my information today and until time machine &
    yosemite get fixed?

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • What is the status pharse returned by expdp ?

    Hi Guys,
    In case of success, Expdp return "successfully completed".
    What is the status returned in case of warning and failure ?
    regards

    I am not looking at this level of precision, just the "line" shown by expdp at the end of logfile, that tells about export status (success, failure or success with warning) .
    example of last 3 lines in logfile (in case of success) :
    Dump file set for SECUREDMP.SYS_EXPORT_SCHEMA_01 is:
    /PRD/sgd/dpdump/exp_p01t_sgd.dmp
    Job "SECUREDMP"."SYS_EXPORT_SCHEMA_01" successfully completed at 08:38:49
    in this case , it is "successfully completed".

  • What is the status of the iPhone 6 plus 128GB pre-orders?

    Does anyone know the delivery status of the iPhone 6 plus 128GB pre-orders made within the first hour on the verizonwireless.com website?  I fully completed the process online for a silver iPhone 6 plus 128GB and received three indications of a 9/19 delivery date (an order summary webpage, an order confirmation webpage, and an order confirmation email with the correct phone upgrade order).  My online verizonwireless.com account doesn't show any orders (in the past 120 days), but when I put in the pre-order confirmation number and my last name I get the message "We received your order and it is in process. Expected Ship Date: Not available at this time"  During Friday and Saturday the date showed 10/14 (not even the 9/19 on the three confirmations).  The question is what is the real delivery date, and was the pre-order really even received?  Is there a Verizon rep online that might be able to check if I provide the necessary numbers and tell me what is the status of my pre-order?  Thanks anyone for any assistance.

    Thank you so much for that information! That is great news! And the first straight answer I've been able to find!! And it makes sense!! I was able to start my order around 2:57am and then with some confusion over losing my unlimited plan & having to choose a new one I probably didn't get the order in until around 3:15-3:20....But my confirmation email didn't come through until 4:55am and I know I was definitely done ordering the phone WAY before then! So I bet they did the first cut off at 4:55 then sent out confirmation emails for those who made the cut! Phew! It's all making sense now thanks to your information! I ordered the 6+ 128gb in gold btw and I can't wait, my 4s is still 3G and it's long overdue for retirement!!

  • What is the deal with facetime

    what is the deal with facetime for iphone 4s

    Wow.  That could not be more vague.
    There is no "deal".
    What are you talking about?

  • What is the average price apple repairing IPhone4s Display failure problem?

    what is the average price apple repairing IPhone4s Display failure problem?

    It depends. If your still within warranty and the display failure isn't your fault you just back up your phone then go to any apple retail store and they'll give you a new one for free. If it is your fault I would still back up your phone and go into the store. Then they'll charge you about £150 and will give you a new one. But you must have your phone backed up. That will be the first thing they ask you.

  • What is the status for job in DBA_SCHEDULER_JOB_RUN_DETAILS if we stop runn

    Hi All,
    I'm going to create a monitoring script to monitor failed DBMS_SCHEDULER JOBS,
    i'm queering DBA_SCHEDULER_JOB_RUN_DETAILS, so i want to know what is the status for the JOB after i force job to stop when it is running?

    Status will be STOPPED with ERROR#0
    thanks you!

  • I sent my iphone in for repair and the status was canceled repair request.

    I sent my iphone 3GS in for repair and when I checked on the status of the repair, it said repair request canceled.  Does this mean it has been fixed and on its way back or they are sending a new one back?  I am confused.

    Ah ,so you are in Europe ( helps to tell upfront as this is a WW forum )
    They will not repair your iPhone they will check it and assuming no user induced damage will send back a replacement refurbished unit  to you ( reason for no accessories )
    There must be a contact number where you arranged the return
    It is possibly going to Eire where Apple seems to ship most EU shipments from

Maybe you are looking for

  • In gui_download FM can we input  FILETYPE = 'WK1'

    In gui_download FM can we use the filetype = 'wk1'. or it is going to support only BIN and ASC. i want to upgraded ws_download to gui_download.in that ws_download filetype was 'WK1' .so how to give WK1 IN GUI_DOWNLOAD. PLS ITS URGENT

  • The slideshow's auto play feature is not working when exported to iPad.

    Is there anyway around this?

  • Query Pld Output

    Hello Experts, I have done a query pld in which item code , description, is repeating. How to restrict this? My Current out put is Itemcode    Item Desc      Qty   Rate       Batch No.  Batch Qty 001            ABC                 10  15000         

  • Re: Difference between function and procedure

    Hello Oracles Guru's, I am learning Oracle and I am beginner. My question may be simple and not worth to ask but I am sorry Why we call Procedures as Stored Procedure but we call functions only functions. As per my understanding I think but the objec

  • Pc will not id printer shows offline

    pc will not transmit to printer shows off line have replaced printer cord This question was solved. View Solution.