What is the Std Cost field in Material document
Hi,
Can someone please advice what the table name and fieldname for fetching the std cost from the material document.
I have checked the tables MKPF and MSEG but could'nt find any.
Thanks,
Arti
Hi,
Can you please tell me where the Standard Cost is stored in the Material Document ? I am looking the same Material Document in the MIGO 'Display Mode' and i am able to trace the Accounting Documents in it..
Can you please clearify where that field is present in the MB03 or MIGO Tcode....
Edited by: nav009 on Jan 15, 2010 7:25 AM
Similar Messages
-
What are the possible cost objects for raw material consumption postings
what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).
For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number. If you are using movement type 201, then the system prompts you to enter the cost center and so on.
Thanks,
Madhav Nanduri -
What is the concept of view in material master?
Hello sap gurus
Some quetions regarding Material Master
what is the concept of views in material master ?
what is determined by specifying industry sector in material master ?
To sell material which views are material are maintened in Material master?
Regards
AmitHi,
<b>Material master for finished ggods is related with SD, MM & PP departments</b>. If you carefully go through the various screens in MM record you will realize the importance of the respective fields and the department to which they belong.
<b>1.Suppose Base unit of measure</b> in Basic data 1 screen. The production people will keep the stock of the item using this UOM.
<b>2. In Sales:Sales Org.1</b> screen we have sales unit in which we will sell the material.
<b>3. Then we have the plant</b> data in which we enter the delivering plant. Also the taxes are determined from the plant so we have the settings for taxes also - whether this material is fully taxable/50% tax/Tax exempted.
<b>4. Then we have purchasing</b> screen in which the data like the purchasing group, variable units,etc are entered. This will effect the purchasing cycle when we are procuring a material from outside. This is related to MM.
<b>5. The we have MRP</b>, this is related to PP as to how to manufacture the product, the MRP type, the strategy group - whether it is MTO/MTS like that.
<b>5. Sales:Sales Org.2 screen</b> - Here we mainatin the account assignment group which is very important as far as the generation of the accounting document is concerned. This triggers the system where to post the value in which G/L account. Accounting document is generated when we create the invoice in VF01 & save it.
<b>6. Work scheduling</b> - Related with the sceduling of the production as to whether underdelivery or overdelivery is allowed, the storage location
<b>7. Quality</b> - Here you can select for a particular finished item where where it has to be checked for quality during its journey from the raw material stage to the finished goods store as a finished item.
<b>8. Accounting</b> - Related to accounting, product costing, total value of the stock in hand, etc. Also related with FI & PP
So all the screens have data which effects one or more modules for the proper functioning of the system to give the optimum results.
<b>Industry Sector:</b>
Key that specifies the branch of industry to which the material is assigned.
<b>Use</b>
When you create a material master record, the industry sector you specify determines
1. which screens appear and in what order
2. which industry-specific fields appear on the individual screens
<b>Screens for Sales:</b>
Sales:Sales Org.1, Sales:Sales Org.2. But other screens also have data which is related to sales. You cannot just maintain the sales views and save the master. It has to be properly linked with the other modules also for the proper functioning of the system. That is why the system is called as "Enterprise Resource Planning" You have to paln the resources of your company and these resources are related with all the modules.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil -
How to Run a Cost Estimate with Budgeted Values parallel to the Std Cost Estiamte
Hi Experts,
My client want to run a parallel cost estimate with Budgeted values for each type of cost in a similar process like standard cost estimate(currently only Std business run only the std. cost estimate). Below will be provided to run the said cost estimate.
1. Budgeted Cost for cost elements against each cost center
2. Re-posting/distribution will be required run to allocate and apportion the cost from service cost centers to Production cost centers
3. All Planned(future) Material Cost will be provided. (note that the valuation strategy of costing variant of standard cost estimate has below sequence
4. Budgeted activity quantities will be provided. (Cost and activity qty for Kp06 and Kp26)
Based on the above data business need to run a cost estimate with budgeted values parallel to the standard cost estimate(based on planned values), which will be compared with actual then Budget at each months.
Simply an alternative cost estimate with budgeted values for a given period for all materials.
Kindly advice the possibility of such a cost estimate in the system and if possible pls. mentioned the Process in order and configuration steps for the same.
Thanks in advance.
AzizHi..
You can define costing variants which have valuation variant for budgeted values parallel to the standard cost estimate in Customizing for Product Cost Controlling.
You can define target cost versions using above costing variants under the customizing transaction OKV6 as below picture.
When you calculate variances, you can check “all target cost version” flag to calculate variances for all target cost versions in the controlling area as below picture.
You can analysis the difference between actual cost and several budget cost using target cost version as below picture. -
What are the tables and fields in fico & sd module
what are the tables and fields in fico & sd module
Hi,
<b> Sales and Distribution:</b>
Customers KNA1 General Data
KNB1 Customer Master Co. Code Data (payment method, reconciliation acct)
KNB4 Customer Payment History
KNB5 Customer Master Dunning info
KNBK Customer Master Bank Data
KNKA Customer Master Credit Mgmt.
KNKK Customer Master Credit Control Area Data (credit limits)
KNVV Sales Area Data (terms, order probability)
KNVI Customer Master Tax Indicator
KNVP Partner Function key
KNVD Output type
KNVS Customer Master Ship Data
KLPA Customer/Vendor Link
Sales Documents VBAKUK VBAK + VBUK
VBUK Header Status and Administrative Data
VBAK Sales Document Header Data
VBKD Sales Document Business Data
VBUP Item Status VBAP Sales Document Item Data
VBPA Partners
VBFA Document Flow
VBEP Sales Document Schedule Line
VBBE Sales Requirements: Individual Records
SD Delivery DocumeLIPS Delivery Document item data, includes referencing PO
LIKP Delivery Document Header data
Billing Document VBRK Billing Document Header
VBRP Billing Document Item
SD Shipping Unit VEKP Shipping Unit Item (Content)
VEPO Shipping Unit Header
<b>Financial Accounting</b>
FBAS Financial Accounting Basis
BKPF Accounting Document Header BUKRS / BELNR / GJAHR
BSEG Accounting Document Segment BUKRS / BELNR / GJAHR / BUZEI
BSIP Index for Vendor Validation of Double BUKRS / LIFNR / WAERS / BLDAT /
Documents XBLNR / WRBTR / BELNR / GJAHR / BUZEI
BVOR Inter Company Posting Procedure BVORG / BUKRS / GJAHR / BELNR
EBKPF Accounting Document Header (docs from GLSBK / BELNR / GJHAR / GLEBK
External Systems)
FRUN Run Date of a Program PRGID
KLPA Customer / Vendor Linking NKULI / NBUKR / NKOAR / PNTYP
/ VKULI / VBUKR / VKOAR
KNB4 Customer Payment History KUNNR / BUKRS
KNB5 Customer Master Dunning Data KUNNR / BUKRS / MABER
KNBK Customer Master Bank Details KUNNR / BANKS / BANKL / BANKN
KNC1 Customer Master Transaction Figures KUNNR / BUKRS / GJHAR
KNC3 Customer Master Special GL Transactions KUNNR / BUKRS / GJAHR / SHBKZ
Figures
LFB5 Vendor Master Dunning Data LIFNR / BUKRS / MABER
LFBK Vendor Master Bank Details LIFNR / BANKS / BANKL / BANKN
LFC1 Vendor Master Transaction Figures LIFNR / BUKRS / GJHAR
LFC3 Vendor Master Special GL Transactions LIFNR / BUKRS / GJHAR / SHBKZ
Figures
VBKPF Document Header for Document Parking AUSBK / BUKRS / BELNR / GJHAR
FBASCORE Financial Accounting General Services Basis
KNB1 Customer Master (Company Code) KUNNR / BUKRS
LFA1 Vendor Master (General Section) LIFNR
LFB1 Vendor Master (company Code Section) LIFNR / BUKRS
SKA1 G/L Account Master (Chart of Accounts) KTOPL / SAKNR
SKAT G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR
Description)
MAHNS Accounts Blocked by Dunning Selection KOART / BUKRS / KONKO / MABER
MHNK Dunning Data (Account Entries) LAUFD / LAUFI / KOART / BUKRS /
KUNNR / LIFNR / CPDKY / SKNRZE /
SMABER / SMAHSK / BUSAB
FI-GL-GL (FBS) General Ledger Accounting: Basic Functions- G/L Accounts
SKAS G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR / SCHLW
Key Word list)
SKB1 G/L Account Master (Company Code) BUKRS / SAKNR
FI-GL-GL (FBSC) General Ledger Accounting: Basic
Functions - R/3 Customizing for G/L Accounts
FIGLREP Settings for G/L Posting Reports MANDT
TSAKR Create G/L account with reference BUKRS / SAKNR
FI-GL-GL (FFE) General Ledger Accounting: Basic
Functions - Fast Data Entry
KOMU Account Assignment Templates for G/L KMNAM / KMZEI
Account items
FI-AR-AR (FBD) Accounts Receivable: Basic Functions - Customers
KNKA Customer Master Credit Management : KUNNR
Central Data
KNKK Customer Master Credit Management : KUNNR / KKBER
Control Area Data
KNKKF1 Credit Management : FI Status data LOGSYS / KUNNR / KKBER / REGUL
RFRR Accounting Data A/R and A/P RELID / SRTFD / SRTF2
Information System
FI-BL-PT Bank Accounting: Payment (BFIBL_CHECK_D) Transactions General Sections
PAYR Payment Medium File ZBUKR / HBKID / HKTID / RZAWE /
CHECT
PCEC Pre-numbered Check ZBUKR / HBKID / HKTID / STAPL
FI-BL-PT-AP(FMZA)Bank Accounting: Payment Transactions Automatic Payments
F111G Global Settings for Payment Program for MANDT
Payment Requests
FDZA Cash Management Line Items in Payment KEYNO
Requests
PAYRQ Payment Requests KEYNO
Hope this solves your concern...
Regards,
Habeeb
Assign points if helpful -
What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601
Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008) -
What is the typical cost of replacing the cooling fan the laptop is HP Pavillion DV6 6165tx.
What is the typical cost of replacing the cooling fan in a
laptop computer ? (In India in Indian Rupees)?
The laptop is HP Pavillion DV6 6165tx. The cost means
fan cost plus labour charges.Hi,
You should know this better than us. Normally part is around $40 (more or less) and labour can be $50 to $200. I would charge this for $400 (minimum) or free.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
What is the most cost effective way to have a broken screen repaired?
What is the most cost effective way to have a broken screen repaired?
One thing to bear in mind, if your iPad is still under any sort of warranty, using any unauthorized repair place may void that.
So you may find less expensive places that are non-authorized, but once you use them, Apple disowns your device and if you have any warranty left, it'll be void. -
How can L identify what are the not null fields of a table in a stored procedure ?
How can L identify what are the not null fields of a table in a stored procedure ?
You could query the data dictionary:
SELECT column_name
FROM all_tab_columns
WHERE owner = '...'
AND table_name = '...'
AND nullable = 'N' -
HT3302 What is the average cost to replace a cracked screen on an ipad?
What is the average cost to replace a cracked ipad screen?
Apple will exchange your iPod for a refurbished one
Out-of-Warranty ServiceIf you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service.Apple reserves the right to determine whether or not your iPad is eligible for Out-of-Warranty service. Replacement iPads have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see the AppleCare+ for iPad and Apple Repair Terms And Conditions for further details.
Here is one third-party place.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
BTW, this is the iPod touch forum. -
Can you get a battery replacement at an Apple store while you wait? What would the rough cost be, out of warranty?
I am not sure what device you are trying to replace the battery on, but usually the battery is at least 30% of the cost of the device from what I have read. Apple likes to keep a monopoly on batteries I think. I have never seen them replace a battery at the store, usually they have to ship it out. You can find batteries for sale online, but you will have to crack the device open yourself.
-
What are the usual date field validations
Hi all,
can you please tell me what are the usual date field validations in selection Screen
Thanks and regards ,
Madhavi pillaOnce you declare it as TYPE SY-DATUM, usually that is enough. Sometimes we will also check that it is not less than '18000101' or greater than '99991231'. Or if you have a specific date range that applies to your program you could check the field contents against that. I hope this helps.
- April King -
What is the actual cost of SAP original Software?
hi experts
<b>What is the actual cost of SAP original Software to implement in one software company.</b>
thanks in advnaceBetween $1 and $100,000,000.
Lots of variables... yearly licensing fees or full purchase, R/3 or complete NetWeaver suite, single user or multi-user, several levels of support or no support, implementation partner expenses, types of hardware, etc....
EDIT:
I just noticed you said "one software company". There are other options if you want to be a "partner". It is one thing to use the software to run your company, it is another if you want the software because your company wants to develop add-ons.
Message was edited by: Norman Salter -
What is the best metadata field for picture TITLE?
Hi -- as stated: what is the best metadata field to use to hold the title of a picture?
I've been using the IPTC field "Title", but:
- I think this is actually used for a person's job title, not the title of a picture, and
- I can't get it to show up in BorderFX (though it does show in Images exported and viewed in Preview)
"Caption" and "Headline" seem to be obvious choices. I'm looking for something is widely used, so that the titles I give my pictures will stay with them and be available to other programs and users after I export the Images from Aperture.
Thanks for you advice!
Kirby.Correcting myself. After reading the User Guide it appears that the title does go in the Title field, imagine that.
IPTC Core Status section
Title
This field can be used as a shorthand reference for the image or “photograph” — primarily for identification. The title of an image should be a short, human-readable name — text and/or numeric reference —and may take several forms; for photographers this might be the filename of their original scan or digital camera file, for news organizations it might be the name of the story for which it’s to be used. (Note that there are new terms in the IPTC Extension which can also be used as image ID’s, if you are concerned about this field being overwritten later in the workflow). The Title term should not be confused with the Headline term, which is a short synopsis of the content of the photograph. There is a button in the panel which can be used to add the current file name to the Title field; however this will not work with a selection of images.
IPTC Core Content section
Headline
A headline is a brief publishable synopsis or summary of the contents of the photograph. Like a news story, the Headline should grab attention, and telegraph the content of the image to the audience. Headlines need to be succinct. Leave the supporting narrative for the Description field. Do not, however, confuse the Headline term with the Title term.
(emphasis added) -
HT204053 what is the monthly cost of using icloud
What is the monthly cost of using icloud on your iphone or pc
kzin69 wrote:
What is the monthly cost of using icloud on your iphone or pc
None... iCloud is Free... > http://www.apple.com/icloud/
https://discussions.apple.com/message/17292613#17292613
Maybe you are looking for
-
I no longer can get the rijks museum widget. Why? And how to restore?
Hallo There. Some time a go ,during an update .I lost my Rijksmuseum widget,which was part of Apples widget program.Does anyone know how to fix this dellema? Thank You for looking in to this. Greetings: John Basso.
-
Shared mailbox contacts to Address Book
Hi all We have recently migrated to an Exchange 2010 environment, our clients using Outlook 2003 and Outlook 2010. We have a large number of shared mailboxes within our organisation that contain their own contacts lists. The shared mailbox is added a
-
I'm making a text editor for practice with java... How do i make a text area with a scrollbar? Horizontil and vertical.. Thanks
-
What's the Mac equivalent of Windows Print Setup?
I can't find where in OS 10.8.5 applications like Numbers or Pages to set margins, page orientation (portrait/landscape), etc. as in Windows Page Setup facility. I also can't find where to set printing in color or B&W.
-
what crap