What is the Sucessor for the ASA 5505 Appliance

Hello,
we are looking for a small Firewall Appliance for branch offices which are connected via MPLS and Internet VPNs in the best case.
We need a small low-priced appliance with the specs of a 5505.
Sometimes the appliances are not Rackmounted but placed inside of small offices, so they need to be silent.
We only need basic Firewalling and IPSec VPN capabilities. No Cloud / Application / Fill-In-Buzzword-here Stuff.
An Hardware Updated 5505 would be ideal.
Is there any real sucessor for the 5505? What would you use for this (other vendors may also apply).
Regards
Sebastian

Up to now, there is no successor for the 5505. Many people expect that something will come soon, I do that for much over a year now ... ;-)
For your needs, a Cisco 880 could be a good buy. Not as fast as the 5505 but much more features for your VPN-deployment.

Similar Messages

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I have just getting a new phone and I have forgot my password an Apple ID what I made new for the new phone now I cannot get on it because asking for id and password what should I do help plz thank u

I have just getting a new phone and I have forgot my password an Apple ID what I made new for the new phone now I cannot get on it because asking for id and password what should I do help plz thank u

Try
https://iforgot.apple.com

I´ve bought the new IPad3, what a disappointment the 3G does not work, no Internet available, APPLE what are you doing for the all the people in Germany who bought the new IPad3? I´m still an Apple fan, all my products are from Apple but I need a solution

I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.

JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it?

TS3212 it says that the download for the new itunes is not a valid Wn32 application. what do i do?

it says that the download for the new itunes is not a valid Wn32 application. what do i do?

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

What are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

iCloud Mail Settings

What are the settings for the "Default Client Settings"?

What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
Thanks
James A+, Network+, MCP

Hi,
The blogs below provides the default client settings.
Default Client Settings in SCCM 2012 SP1
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
Note: Microsoft provides third-party contact information to help you find technical
support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

What are the parameters for the processes menu items

Is there anywhere that lists out what the exact parameters of the process menu items are. i.e "Make Louder, Normalize, Hard Limit, Equalize Volume Levels",
For instance when you use "Make Louder" you see the dialog box title change from "Analyzing peeks" to "Applying Hard Limit". What exactly is happening when these processes are being applied? I realize that the Hard limiter is being applied, but with what paramaters and what does "Analyzing peeks" really mean and is there a way to do that by its self and if so what can be learned by the results.
I would also like to know the paramaters for the others as well. It would be helpfull to know, so one could dial up or down the paramaters to achieve a similar result, but with slightly more or less effect.
Regards,
Don T

Nothin?

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

What is the path in the filesystem for the deployed Wendynpro application .

What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
Please help..

Hi,
What is the path in the filesystem for the deployed Wendynpro application in the WAB AS
If you search for your component under the /usr/<SID> folder
We have a different version of webdynpro application running in production and non production , what is the process for overwriting the deployed application from one enviorment to another.
If you have NWDI in place CTS would help in this, else you can deploy your application using sdm.
in CE you can deploy the application from NWDS.
Regards
Ayyapparaj

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

What is the part number for the fan for the dv7 2270 us

what is the part number for the fan for the dv7 2270 us

Dear Kamat,
The HP manual (http://h10032.www1.hp.com/ctg/Manual/c01689926.pdf) says that the Fan/Heat sink assembly (depending on the graphics subsystems memory type), can be the following:
516876-001 (for discrete)
516331-001 (for UMA)
I dont know what graphics subsystem type is the DV7-2270US (VM189UA), but it doesnt matter in this case, becouse, if you search for those two part numbers, no one of them, is used in that computer. Check it your self:
http://h20141.www2.hp.com/Hpparts/part_where_used.aspx?mscssid=5FB90592D9AD45D39C93EDC2771FE844&Sear...
and
http://h20141.www2.hp.com/Hpparts/part_where_used.aspx?mscssid=5FB90592D9AD45D39C93EDC2771FE844&Sear...
CAN ANYBODY ELSE TELL US WHAT IS THE PART NUMBER FOR THE FAN OF A HP PAVILION DV7-2270US (VM189UA) ??
Regards,
Nicolas

HT3231 What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air

What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air

As I posted "it is an Unknown", at least to me, what type FW port is on the OPs older Mac.
LowLuster
HT3231 Re: What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
Dec 26, 2013 8:04 PM (in response to OGELTHORPE)
But the newest Mac notebooks do not have a firewire port.
So he may need a TB to FW adapter, $29, a FW 400 or 800 cable, $??, and then a FW 400 to 800 cable/port adapter (If the old Mac only has a FW 400 port), $??.
It is unknown if the old Mac has a FW 400 or 800 port.

"There was a problem downloading the software for the iPhone....An unknown error occurred (-23)." What should I do?

"There was a problem downloading the software for the iPhone....An unknown error occurred (-23)." What should I do?

i have the same problem:
I have an iphone 4s and I have been trying for months to update my phone from iOS 6.1.3 to the new one.
I recently got a new computer (my old harddrive crashed and will not work at all) and I just now copied all my music and photos to the computer.
Now I have been trying to update to the iOS 7.1 both on iTunes and on the iPhone but neither one work. I keeps saying "unknown error" .
I am wondering if I restore it to factory settings and then update it will the install work?
also since i have backed up to the iCloud and my computer..will i be able to recover my music, contacts, notes and photos???
thanks in advance.

What is the default for the "Display PDF in Browser" setting?

What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
Also, are any statistics available on what proportion of users have this setting set to on?

For all three the default is "checked".
Be well...

What is the Sucessor for the ASA 5505 Appliance

Similar Messages

Maybe you are looking for