What is the supported connectivity of OSN to internal systems by Oracle

I have a project that is using OSN and under the OSN specification we are trying hammer down vendor access back into our environment. The OSN documentation calls for HTTPs access that is turned to HTTP over the laod balancers. It is easier and perhaps safer to use a VPN from OSN to our environment.
My question is: is a VPN connection supported by Oracle?
Thanks!!

Not sure to understand your issue.... you can set the pause, for example
SQL> set pages 24 pause on pause "Press Enter "
SQL> select table_name from user_tables;or you can spool the result
SQL> set pages 9999
SQL> spool tables
SQL> select table_name from user_tables;then edit/list tables.lst.
... or increase the lines of scrollback in your ssh emulator.

Similar Messages

HT2822 What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n???? does not support with ethernet gigabit?

What is the better Connection on Apple TV v2, Ethernet or Wifi 802.11n????
Does not support with ethernet gigabit?

If you have stable wifi with good connectivity it should work fine - in reality many people struggle with wifi.
I was plagued by interference issues with wifi whenever the microwave was used and would always use ethernet now as my first preference for stability.
As the house is not wired for ethernet several years ago I tried mains powerline network adapters that are made by many companies.
I use these from Devolo currently:
http://www.devolo.co.uk/consumer/81_dlan-500-avmini_starter-kit_product-pictures _8.html?l=en
They are excellent and you can create a wired network in minutes without running long lengths of cable.
As with wifi they never achieve the highest rated speeds and are dependent on the wiring quality but are more than adequate for HD streaming to multiple AppleTVs.
Many other manufacturers produce these eg Belkin, Netgear etc as well as lesser known brands.
AC

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go? Also, are there any compatiility issues with newer models and G5/G4s?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

What is the best Connection option from WebSphere to Weblogic?

What is the best Connection option from WebSphere to Weblogic?
          We are trying to send XML messages from Websphere to WLS to active some
          services....
          any pointers, suggestions?
          Thx
          VJ


Hi,
One of my clients has an environment similar to yours with an internal pair of F5s and a pair used for the access from the internet.
I am only going to focus on the method using an F5 Load Balancer and SSL Offloading. the setup of the F5 will not be covered in detail but a reference to the documentation to support SharePoint and SSL Offloading will be provided
Since you arte going to be using SSL Offloading you do not need to extend your WebApps to use separate IIS WebSites with Unique IP Addresses
Configure the F5 with SSL Offloading
Configure a Internal AAM for SSL (HTTPS) for each WebApp that maps to the Public HTTP FQDN AAM Setting for each WebApp
Our environment has an additional component we require RSA Authentication for all internet facing Sites. So we have the extra step of extending the WebApp to a separate IIS WebSite and configuring RSA for each extended WebSite.Reference:
Reference SharePoint F5 Configuration:
http://www.f5.com/featured/video/ssl-offloading/
-Ivan

What are the supported uplink modules in the WS-C3850-48F-L?

Our company has two offices, but the distance between them is a little far. I want to connect the network between the two offices with fiber, But our company is using Cisco Catalyst 3850 Switches , So what are the supported uplink modules
in the WS-C3850-48F-L?

The WS-C3850-48F-L supports the following uplink modules:
4 x 1GE network module C3850-NM-4-1G=
2 x 1/10GE network module C3850-NM-2-10G=
4 x 1/10GE network module C3850-NM-4-10G=
http://www.3anetwork.com/cisco-ws-c3850-48f-l-price_p1839.html

What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)

I feel like I should know the answer to this. I can't believe it is a hard question.
What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)
Easy? Right?
Just plug my iphone in to a mac and copy a photo from the mac to my iphone.
I don't have internet access - I can't email it, or mobileme it, or dropbox it.

iTunes. Other than that there is no direct method. However, do try the iPhone forums.

What is the Supported wifi module for hp dv6-6154tx

What is the supported wifi module part number of wifi card number for hp dv6-6154tx . I lost it somewhere when I tried to add thermal compound on processor. Help me plz

Hi,
These are the part numbers of the wireless card which are suitable for your unit from the below link.
http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
Look for page # 67.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

What are the supported Platforms and system requirements for JSE?

What are the supported Platforms and system requirements for JSE?

Hi There,
The following are the system requirements & the support platforms for JSE :-
* Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
* Solaris 9 Operating System (x86 Platform Edition)
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
* Windows 2000 and Windows XP
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher

What are the pin connections from 7764 to stepper motor drive

what are the pin connections from UMI 7764 to stepper motor drive? I use PCI 7340 controller. Third party driver is not branded, but assembled. It has 3 inputs, one for (A,A/) one for (b,b/) one for enable, apart from ground pin.

Dear enigmata,
Here is a link to the UMI Manual that describes the signal connections:
http://www.ni.com/pdf/manuals/321941b.pdf
What you really need is the documentation for the input of the "translator" mentioned on the left side of the last diagram you posted. It is still not possible to tell which of you drive inputs correspond to step and direction (or CW, CCW) because in the circuit that you posted, these signals have already been converted by other circuitry in the drive to the A, A/, B, B/ output signals for the stepper motor.
I agree with Jochen: Without the documentation you will need to test it out as he described in his last post.
Best Regards,
Nate Holmes
National Instruments

HT1222 Hi, what is the support end date for Quicktime 7.7.3?

Hi, what is the support end date for Quicktime 7.7.3?

Hi
<b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
BAPI_PO_GETRELINFO
BAPI_PO_GETITEMSREL
BAPI_PO_GETITEMSREL            List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO             Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_RELEASE                Release Purchase Orders
BAPI_PO_RESET_RELEASE          Cancel Release of Purchase Orders
<u>Related link -></u>
Re: How to fetch data from back end for PO?
Hope this will help.
Do let me know.
Regards
- Atul

What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20? Question I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20? Answer Please see

What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20?
Question
I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20?
Answer
Please see the list below:
- IBM SPSS Statistics 18 and 19 releases are supported on Apple Macintosh OS 10.5 (Leopard) and 10.6 (Snow Leopard) with Intel processor.
- IBM SPSS Statistics 20 release is supported on Apple Macintosh OS 10.6 (Snow Leopard) and 10.7 (Lion) with Intel processor.
- The IBM SPSS Statistics versions 18 and 19 are not supported on Mac OS 10.7 (Lion).
THIS MEANS THAT TO USE LION ONE FIRST HAS TO UPGRADE TO SPSS STATISTICS 20.

Whilst the 2012-02-15 edition of IBM's matrix does not mention Lion, a few users have noted that:
• 18.0 can be troublesome
• an updated version of 18.x should be better.
Related files
PASWStatistics_1 803_Mac_Patch.dmg and IBM SPSS Statistics 18.0.3.4 Hotfix Mac.zip are no longer available from the spss.com domain, and I could not find them in an IBM domain. If you download from unofficial sources, proceed with caution.
Related pages
In Apple Support Communities:
• will PASW (SPSS) 18 work with LION
• PASW statistics 18 crashes every time
• Java Virtual Machine & SPSS 18 with a question from me.
Elsewhere:
• SPSS on Lion « Decorator Pattern
• SPSS / PASW Mac Patch 18.0.3 and Graphing Fix | The Personal Website of Philip Fizur
• Patching PASW 18 (or SPSS 18) for Mac OS X (Leopard, Snow Leopard, Lion) to version 18.0.3.1
• and other sources, including one domain that I treat as reputable but I'll respectfully not share that link here.
At a glance, you might find that 18.0.3.4 is compatible with Lion.

What are the supported countries?

What are the supported countries in order to be able to convert and export?

Hi dollyp56,
The ExportPDF online service is available for purchase in the following countries: Countries where ExportPDF is available for purchase.
If you're wondering what languages are available for text recognition, please see this document: Using OCR in Adobe ExportPDF.
Please let us know if you have additional questions.
Best,
Sara

What is the purpose of Date From and Date To In Oracle HRMS ?

hi
I have doubt on
What is the purpose of Date From and Date To In Oracle HRMS?
Thanks

Where do you see these fields? Please give full details (eg, the navigation path).
If you're referring to Effective Start Date and Effective End Date (effective_start_date, effective_end_date) these are two fields that appear on many HRMS entities. They're used to store dated history over time. For example:
14-Jan-2009 to 19-Apr-2009 - Pam Stephens
20-Apr-2009 to date - Pam Erickson
In this example Pam got married on the 20th April 2009 and changed her surname from Stephens to Erickson. Here the history of changes are kept so that if we date-track to any time prior to the 20th April 2009 we'll see Pam Stephens and if we date-track on or after the 20th April 2009 we'll see Pam Erickson.
Check out the following Oracle Support article for more information:
How Date Track Works [ID 177733.1]

I travel between countries often for my work. What is the best iphone to use for international calling at a reasonable cost?

I travel between countries often for my work. What is the best iphone to use for international calling at a reasonable cost?

All six Uk carriers carry the iPhone officially and micro sims are very common therefore
PAYG is very common in UK every carrier offers a number of packages but all commitment free
http://support.apple.com/kb/ht1937
List of Turkish Carriers within this doc

What are the drawbacks of implementing QAS (Quick Address System) with SAP CRM

Hi,
What are the drawbacks of implementing QAS (Quick Address System) for duplicate address management in SAP. QAS is a third party software that deals with duplicate address in the system.
Thanks in advance...

Hi Peter,
You can refer the CRM installation guide which has all the details including the post installation steps you require:
You can refer to CRM installation guide in SAP Service Market Place,which would also guide you about post-installation steps.
Please go through the below link:
service.sap.com/instguides> SAP Business Suite Solutions>SAP CRM--> SAP CRM 7.0
Hope this helps.
Regards
Yogesh

What is the supported connectivity of OSN to internal systems by Oracle

Similar Messages

Maybe you are looking for