WHAT IS THE TABLE TO CREATE TRAIL BALANCE IN REPORT PAINTER.
Hello Friends,
Friends my client requirement is to create the Trail balance but i want to create the trail balance(Report) in REPORT PAINTER
can any buddy please let me know which "TABLE" we need to assign to the library. I mean in which table we can create the trail balance....
quick reply will be more appreciated...
thanks........
Moderator: Please, search SDN and don't post in CAPITAL letters
Hi
as per my knoweladge G\L balances display table is not available in SAP so go for t.Code FIS4 (Report Painter) and create Report as you wish.
satish
Similar Messages
-
What are the tables/view used to Compute Dependecies Report
Hi,
what are the tables/views we have in APEX, which is used to create the Compute Dependecies Report
Home -> Application xxxxx > Application Reports > Shared Components > Database Object Dependencies
thanks,
DeepakHi Scott,
thanks for the quick response.
So my question is then...
I want to create a APEX Report which will give me the following information.
1. Application and all the Pages associated with it, which I am getting from apex_applications and
apex_application_pages. This is OK
2. List of all the Database Objects (Table/View) which the individual page is using, I mean relation between Page ID and database object. HOW to get that???.....(I want for each individual page, the list all the database objects (tables/views), which that page is using)
Thanks,
Deepak -
Trail Balance in report painter
Hello Friends,
i want to create trail balance report In report painter(table:faglflext). My issue is if the cumulative balance i.e (Dr. - Cr.) of G/L is positive then the balance should be shown in debit side column, if the cumulative balance i.e (Dr. - Cr.) of G/L is negative then the balance should be shown in Credit side column. will you please let me know how and where to write this logic...
Thank You....Hello,
Normally, reports S_ALR_87012277 - G/L Account Balances and S_ALR_87012301 - Totals and Balances serve the purpose of outputing trail balance for accounting staff.
Kind regards,
John Chin -
What are the tables to be used for these reports
hello everybody,
i am a new user. it is only recently that i have started learning ABAP. i was given a rask by my faculty to develop the following reports. can anyone help me find out the tables that are used for them.
1. Report for Sales Orders due for delivery.
2. Revenue Reports based on Order Types.
3. Report for list of Pending Purchase Orders, Cancel Purchase orders.Hi,
This depends on which fields you are supposed to show in output.Ask the person about layout requirement. How they want output of the report and which fields.
Normally Functional person will give table name also.
Here are few tables which can be useful in your requirement.
Sales Header table : VBAK
Sales Item table : VBAP
Delivery Header : LIKP
Delivery Item : LIPS
Purchase order header : EKKO
Purchase order item : EKPO
Better to concern this with u r requester and u ll get definite answer.
*MARK if this helps -
What is the prerequisite for creating two hierarchies from one fact table i
Hi,
what is the prerequisite for creating two hierarchies from one a single fact table.
Rgds,
Amitcreate global temporary table t1 as select * from trn_ordbase on commit preserve rows;You CANNOT use this syntax.
http://download-east.oracle.com/docs/cd/B19188_01/doc/B15917/sqcmd.htm
http://download-east.oracle.com/docs/cd/B19188_01/doc/B15917/glob_tab.gif
http://download-east.oracle.com/docs/cd/B19188_01/doc/B15917/cre_tabl.gif -
What are the prerequisites before creating a Table Control?.
What are the prerequisites before creating a Table Control?.
It depends on the kind of application you want to develop....You can use Editable ALV or Table Control......
If you need a table control...The best is create an Structure in SE11 to assing the fields to the table....It's easy -;)
Greetings,
Blag. -
What are the tables rfpdo and rfpdo1?
what are the tables rfpdo and rfpdo1?
wht are these fields?
rfpdo-allgstid
rfpdo1-allgfaelLook at <a href="http://help.sap.com/saphelp_46c/helpdata/en/40/5f3275e24bd111950d0060b03c6b76/frameset.htm">Data Collection Programs for FI-GL, FI-LC, CO-OM and CO-PA</a>
<i>Data Collection Programs for FI-GL, FI-LC, CO-OM and CO-PA
Description
1. Data retrieval from the FI general ledger With the report RFBILA00, data from the balance sheet and the P+L statement can be transferred to SAP-EIS. Detailed information on this is stored with the corresponding parameter of the report RFBILA00 (RFPDO-BILA_EIS).
2. The interface to FI-LC has been revised and the sender structure enhanced. AS sender field names were changed, it is necessary to adapt transfer rules created in release 2.2. Detailed information on this interface is contained in the online help for transfer program RGCEISS1.
3. CO-PA data can be transferred into SAP-EIS using a basic report. More information on this can be found in the Implementation Guide of SAP-EIS.
4. Data from CO-OM can be transferred to SAP-EIS using Report Writer reports. Since reports must fulfill certain conditions for the data transfer, standard reports in the report group '1EI' are delivered for CO-CCA. From the same group, you can define reports which transfer data from CO-OPA to SAP-EIS. You will find more information on this in the implementation guide.</i>
Regards -
What are the tables will update while loading Master data ?
Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar -
What are the tables and fields in fico & sd module
what are the tables and fields in fico & sd module
Hi,
<b> Sales and Distribution:</b>
Customers KNA1 General Data
KNB1 Customer Master Co. Code Data (payment method, reconciliation acct)
KNB4 Customer Payment History
KNB5 Customer Master Dunning info
KNBK Customer Master Bank Data
KNKA Customer Master Credit Mgmt.
KNKK Customer Master Credit Control Area Data (credit limits)
KNVV Sales Area Data (terms, order probability)
KNVI Customer Master Tax Indicator
KNVP Partner Function key
KNVD Output type
KNVS Customer Master Ship Data
KLPA Customer/Vendor Link
Sales Documents VBAKUK VBAK + VBUK
VBUK Header Status and Administrative Data
VBAK Sales Document Header Data
VBKD Sales Document Business Data
VBUP Item Status VBAP Sales Document Item Data
VBPA Partners
VBFA Document Flow
VBEP Sales Document Schedule Line
VBBE Sales Requirements: Individual Records
SD Delivery DocumeLIPS Delivery Document item data, includes referencing PO
LIKP Delivery Document Header data
Billing Document VBRK Billing Document Header
VBRP Billing Document Item
SD Shipping Unit VEKP Shipping Unit Item (Content)
VEPO Shipping Unit Header
<b>Financial Accounting</b>
FBAS Financial Accounting Basis
BKPF Accounting Document Header BUKRS / BELNR / GJAHR
BSEG Accounting Document Segment BUKRS / BELNR / GJAHR / BUZEI
BSIP Index for Vendor Validation of Double BUKRS / LIFNR / WAERS / BLDAT /
Documents XBLNR / WRBTR / BELNR / GJAHR / BUZEI
BVOR Inter Company Posting Procedure BVORG / BUKRS / GJAHR / BELNR
EBKPF Accounting Document Header (docs from GLSBK / BELNR / GJHAR / GLEBK
External Systems)
FRUN Run Date of a Program PRGID
KLPA Customer / Vendor Linking NKULI / NBUKR / NKOAR / PNTYP
/ VKULI / VBUKR / VKOAR
KNB4 Customer Payment History KUNNR / BUKRS
KNB5 Customer Master Dunning Data KUNNR / BUKRS / MABER
KNBK Customer Master Bank Details KUNNR / BANKS / BANKL / BANKN
KNC1 Customer Master Transaction Figures KUNNR / BUKRS / GJHAR
KNC3 Customer Master Special GL Transactions KUNNR / BUKRS / GJAHR / SHBKZ
Figures
LFB5 Vendor Master Dunning Data LIFNR / BUKRS / MABER
LFBK Vendor Master Bank Details LIFNR / BANKS / BANKL / BANKN
LFC1 Vendor Master Transaction Figures LIFNR / BUKRS / GJHAR
LFC3 Vendor Master Special GL Transactions LIFNR / BUKRS / GJHAR / SHBKZ
Figures
VBKPF Document Header for Document Parking AUSBK / BUKRS / BELNR / GJHAR
FBASCORE Financial Accounting General Services Basis
KNB1 Customer Master (Company Code) KUNNR / BUKRS
LFA1 Vendor Master (General Section) LIFNR
LFB1 Vendor Master (company Code Section) LIFNR / BUKRS
SKA1 G/L Account Master (Chart of Accounts) KTOPL / SAKNR
SKAT G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR
Description)
MAHNS Accounts Blocked by Dunning Selection KOART / BUKRS / KONKO / MABER
MHNK Dunning Data (Account Entries) LAUFD / LAUFI / KOART / BUKRS /
KUNNR / LIFNR / CPDKY / SKNRZE /
SMABER / SMAHSK / BUSAB
FI-GL-GL (FBS) General Ledger Accounting: Basic Functions- G/L Accounts
SKAS G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR / SCHLW
Key Word list)
SKB1 G/L Account Master (Company Code) BUKRS / SAKNR
FI-GL-GL (FBSC) General Ledger Accounting: Basic
Functions - R/3 Customizing for G/L Accounts
FIGLREP Settings for G/L Posting Reports MANDT
TSAKR Create G/L account with reference BUKRS / SAKNR
FI-GL-GL (FFE) General Ledger Accounting: Basic
Functions - Fast Data Entry
KOMU Account Assignment Templates for G/L KMNAM / KMZEI
Account items
FI-AR-AR (FBD) Accounts Receivable: Basic Functions - Customers
KNKA Customer Master Credit Management : KUNNR
Central Data
KNKK Customer Master Credit Management : KUNNR / KKBER
Control Area Data
KNKKF1 Credit Management : FI Status data LOGSYS / KUNNR / KKBER / REGUL
RFRR Accounting Data A/R and A/P RELID / SRTFD / SRTF2
Information System
FI-BL-PT Bank Accounting: Payment (BFIBL_CHECK_D) Transactions General Sections
PAYR Payment Medium File ZBUKR / HBKID / HKTID / RZAWE /
CHECT
PCEC Pre-numbered Check ZBUKR / HBKID / HKTID / STAPL
FI-BL-PT-AP(FMZA)Bank Accounting: Payment Transactions Automatic Payments
F111G Global Settings for Payment Program for MANDT
Payment Requests
FDZA Cash Management Line Items in Payment KEYNO
Requests
PAYRQ Payment Requests KEYNO
Hope this solves your concern...
Regards,
Habeeb
Assign points if helpful -
What is the use for CREATING VIEW WITH CHECK OPTION?
Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
KarthikHi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables. -
What is the table name for Workload analysis?
Hi All TechGurus,
We need to create an ABAP program in which it displays some information of Transaction (STO3n), Report for the same (SAPWL_ST03N)
We want to create an ABAP program to get the output in excel format?
What is the table name for Workload analysis?
Many thanks in advance!!Hi Keshav,
Thank you for your reply.
As per my requirement, i want to create an ABAP program in which it displays some information of Transaction (STO3n) and want to send the output in excel format. however I don't understand how to start with it.
Below are the conditions -
1. display data for today's date
2 .In transaction profile, task should be Dialogue.
from where should i fetch data which is getting displyed after executing t.code ST03n?
Please help me with your suggessions...
Thanks -
What is the procedure to create field catalog in alv
what is the procedure to create field catalog in alv?
with a example please.Hi,
U can use the function module REUSE_ALV_FIELDCAT_MERGE...If we use a structure that is exactly
identical to the datadictionary other wise u hav to hard code as in the following example.
**ALV EXAMPLE
*& Report ZJE_ALV_EXAMPLE
REPORT zje_alv_example.
TYPE-POOLS: slis.
*type declaration for values from ekko
TYPES: BEGIN OF i_ekko,
ebeln LIKE ekko-ebeln,
aedat LIKE ekko-aedat,
bukrs LIKE ekko-bukrs,
bsart LIKE ekko-bsart,
lifnr LIKE ekko-lifnr,
END OF i_ekko.
*type declaration for values from ekpo
TYPES: BEGIN OF i_ekpo,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
matnr LIKE ekpo-matnr,
menge LIKE ekpo-menge,
meins LIKE ekpo-meins,
netpr LIKE ekpo-netpr,
END OF i_ekpo.
DATA: it_ekko TYPE STANDARD TABLE OF i_ekko INITIAL SIZE 0,
wa_ekko TYPE i_ekko.
DATA: it_ekpo TYPE STANDARD TABLE OF i_ekpo INITIAL SIZE 0,
wa_ekpo TYPE i_ekpo .
*variable for Report ID
DATA: v_repid LIKE sy-repid .
*declaration for fieldcatalog
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA: it_listheader TYPE slis_t_listheader.
declaration for events table where user comand or set PF status will
be defined
DATA: v_events TYPE slis_t_event,
wa_event TYPE slis_alv_event.
declartion for layout
DATA: alv_layout TYPE slis_layout_alv.
declaration for variant(type of display we want)
DATA: i_variant TYPE disvariant,
i_variant1 TYPE disvariant,
i_save(1) TYPE c.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: i_title_ekko TYPE lvc_title VALUE 'FIRST LIST DISPLAYED'.
DATA: i_title_ekpo TYPE lvc_title VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
v_repid = sy-repid.
PERFORM build_fieldcatlog.
PERFORM event_call.
PERFORM populate_event.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_listheader USING it_listheader.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATLOG
Fieldcatalog has all the field details from ekko
FORM build_fieldcatlog.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_m = 'PO NO.'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-seltext_m = 'DATE.'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'BUKRS'.
wa_fieldcat-seltext_m = 'COMPANY CODE'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'BUKRS'.
wa_fieldcat-seltext_m = 'DOCMENT TYPE'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'LIFNR'.
wa_fieldcat-no_out = 'X'.
wa_fieldcat-seltext_m = 'VENDOR CODE'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM event_call.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = v_events
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM populate_event.
READ TABLE v_events INTO wa_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
wa_event-form = 'TOP_OF_PAGE'.
MODIFY v_events FROM wa_event TRANSPORTING form WHERE name =
wa_event-form.
ENDIF.
READ TABLE v_events INTO wa_event WITH KEY name = 'USER_COMMAND'.
IF sy-subrc EQ 0.
wa_event-form = 'USER_COMMAND'.
MODIFY v_events FROM wa_event TRANSPORTING form WHERE name =
wa_event-name.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
retreiving values from the database table ekko
FORM data_retrieval.
SELECT ebeln aedat bukrs bsart lifnr
FROM ekko
INTO TABLE it_ekko.
ENDFORM. "data_retrieval
*& Form bUild_listheader
text
-->I_LISTHEADEtext
FORM build_listheader USING i_listheader TYPE slis_t_listheader.
DATA hline TYPE slis_listheader.
hline-info = 'this is my first alv pgm'.
hline-typ = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
text
FORM display_alv_report.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = i_title_ekko
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
it_fieldcat = i_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
i_save = 'A'
is_variant = i_variant
it_events = v_events
TABLES
t_outtab = it_ekko
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
PERFORM build_fieldcatlog_ekpo.
PERFORM event_call_ekpo.
PERFORM populate_event_ekpo.
PERFORM data_retrieval_ekpo.
PERFORM build_listheader_ekpo USING it_listheader.
PERFORM display_alv_ekpo.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
text
FORM build_fieldcatlog_ekpo.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_m = 'PO NO.'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-seltext_m = 'LINE NO'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-seltext_m = 'MATERIAL NO.'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MENGE'.
wa_fieldcat-seltext_m = 'QUANTITY'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MEINS'.
wa_fieldcat-seltext_m = 'UOM'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'NETPR'.
wa_fieldcat-seltext_m = 'PRICE'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM event_call_ekpo.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = v_events
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM populate_event_ekpo.
READ TABLE v_events INTO wa_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
wa_event-form = 'TOP_OF_PAGE'.
MODIFY v_events FROM wa_event TRANSPORTING form WHERE name =
wa_event-form.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM f_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_listheader
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM data_retrieval_ekpo.
SELECT ebeln ebelp matnr menge meins netpr
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. "DATA_RETRIEVAL_EKPO
*& Form BUILD_LISTHEADER_EKPO
text
-->I_LISTHEADER text
FORM build_listheader_ekpo USING i_listheader TYPE slis_t_listheader.
DATA: hline1 TYPE slis_listheader.
hline1-typ = 'H'.
hline1-info = 'CHECKING PGM'.
ENDFORM. "BUILD_LISTHEADER_EKPO
*& Form DISPLAY_ALV_EKPO
text
FORM display_alv_ekpo.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
i_grid_title = i_title_ekpo
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = i_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT =
i_save = 'A'
IS_VARIANT =
it_events = v_events
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY_ALV_EKPO
Reward if Helpful -
What is the table for query name
Hi All,
I need an urgent requirement for removing duplicate technical query names from the production. Since there are few issues with the SAP given program I am customizing the SAP Program. Can any one tell me what is the table where the QUERY NAME and it's technical name can be found?
Thanks,
Alex.hi Alex,
try RSRREPDIR, RSZCOMPDIR.
there is one oss note all the tables.
Table containing Work Book and query relation
Query Detailes
oss 792779
Symptom
Report ANALYZE_RSZ_TABLES is designed as a check-tool for detecting and solving different types of inconsistencies in the main query definition database tables.
The program is recommended for BW system administrators.
Other terms
Query definition, query, reusable, component, variable, missing elements, missing records, missing UID, INCONSISTENCY, RSZELTDIR, RSZCOMPDIR, RSZCOMPIC, RSZGLOBV, RSZCALC, RSZSELECT, RSRREPDIR.
Reason and Prerequisites
ATTENTION: the described version of the program is delivered with the following Support Packages:
SP27 for release BW 3.0B
SP21 for release BW 3.1C
SP13 for release BW 3.5
All versions of this report available in systems before those Support Packages are test versions which can be used only for information purposes.
Check prerequisites
Checks are possible only for elements in object version 'A' (active) and 'D' (delivered).
Checks for query elements in 'D' version are possible only in the systems which are set as content.
Checks description
Report performs checks in the tables containing the parts of the definitions of queries and query components: RSRREPDIR, RSZCOMPDIR, RSZCOMPIC, RSZGLOBV, RSZELTDIR and RSZELTXREF.
1. Table RSRREPDIR
The table RSRREPDIR is a header table of the generated reports. Consistency of query definition in this table allows to select a query in the Open Dialogs of fronted application and to call report generated for this particular query using transaction RSRT.
The following errors can be found:
- queries with missing definition;
- queries with missing GENUNIID;
- queries with technical names different than in RSZCOMPDIR;
- non-queries in the table.
1.1 Queries with missing definition
The queries are available only in the table RSRREPDIR and not found in the table RSZELTDIR in the corresponding object version. Such queries (in active version) can be accessed only from RSRT transaction. An attempt to execute such query will return the short dump 'Exception condition INCONSISTENCY'. The error also happens during query generation in RSRT or during mass regeneration of the queries using RSR_GEN_DIRECT_ALL_QUERIES report or application menu of transaction RSRT. The inconsistent queries can not be repaired because of missing query definitions. The recommended solution is to delete those records in order to avoid the possible system dumps.
1.2 Queries with missing GENUNIID
Queries having empty GENUNIID field in the table RSRREPDIR. Such queries may be available in the frontend and in RSRT transaction. An attempt to execute such query will return the message'GENUNIID not found'. Situation requires additional investigation at SAP. Create an OSS message for BW-BEX-ET-QDEF.
1.3 Queries with technical names different than in RSZCOMPDIR
The check outputs the queries which have different technical names in the RSRREPDIR and RSZCOMPDIR tables. Execution of a query using the technical name given in Query Designer and stored in the table RSZCOMPDIR will return the error message 'GENUNIID not found'. The system tries to find the corresponding GENUNIID for the wrong COMPID which does not exist in the system or which belong to another query. The recommended solution is to correct the wrong COMPID in the table RSRREPDIR via corresponding procedure.
1.4 Non-queries in the table
The table RSRREPDIR normally contains only reports. Query elements of other types should not exist in this table and can be deleted. In case, when such records exist in the table an attempt to access them in RSRT returns the error message 'GENUNIID not found'. The recommended solution is to delete those records from the table using the corresponding procedure.
2. Table RSZCOMPIC
The table RSZCOMPIC contains an InfoProvider assignment for queries and other reusable query components (STR, RKF and CKF).
The following errors can be found:
- local elements in RSZCOMPIC;
- components with inconsistent definition;
- components based on non-existing InfoProviders;
- components based on non-active InfoProviders.
2.1 Local elements in RZSCOMPIC
The table RSZCOMPIC contains an InfoProvider assignment for the reusable components. The local elements and also variables have no InfoProvider assignment and should not exist in this table. Those elements can be deleted via corresponding procedure.
2.2 Components with inconsistent definition
The reusable queries or query components existing in the table RSZCOMPIC, but not found in the table RSZELTDIR. Those reusable components may return 'Exception condition INCONSISTENCY' dump during accessing/execution. The situation may have different outcomes and has to be investigated at SAP. Create an OSS message for BW-BEX-ET-QDEF.
2.3 Components based on non-existing InfoProviders
Queries or query components are assigned to the InfoProviders which do not exist anymore in the system. Queries without InfoProvider are not available in Open Dialogs of frontend applications, but can be executed in RSRT. The execution will return the error message'InfoProvider not found'. The recommended solution is to delete the unnecessary components. Deletion of these queries or query components can be done directly from the list using corresponding procedure similar to RSZDELETE transaction.
2.4 Components based on non-active InfoProviders
Queries or query components which are assigned to the InfoProviders which do not exist in the system in the active version. Queries without active InfoProvider are not available in Open Dialogs of frontend applications. In case, an affected query is technically consistent, an attempt to execute it in transaction RSRT will return the message 'Activate the XXX InfoCube / InfoProvider again. Message #BRAIN 056'. Quite often this error is combined with other errors like missing GENUNIID in the RSRREPDIR or other inconsistencies. Each case has to be investigated in order to get the current status of this object. If the affected query is useless, it can be deleted from the system using transaction RSZDELETE.
The check is available only for the query elements in object version 'A' (active).
3. Table RSZCOMPDIR
The table RSZCOMPDIR is the directory table containing the main properties of all reusable components.
The following errors can be found:
- duplicated technical names (COMPID);
- components with inconsistent definition;
- components without InfoProvider assignment;
- components with missing OWNER.
3.1 Duplicated technical names (COMPID)
The check outputs queries or other reusable query components which have duplicated technical names (COMPID).
The error does not cause any dumps in ABAP or terminations in Query Designer, but may cause several symptoms in different reporting areas:
different queries are available in BEX Analyzer and RSRT under the same name;
wrong query is used as Data Source for Web Template (Web Reporting, Reporting Agent, Broadcasting, MDX);
replacement of variables does not work... etc.
The recommended solution is to provide a new technical name for the duplicated component using corresponding procedure.
ATTENTION: in case when there are only 2 components with the duplicated technical name, only one of those 2 components can be renamed using the corresponding procedure.
The alternative solution for renaming the duplicated technical names is to use the ABAP report RENAME_DUPLICATE_ELEMENTS.
3.2 Components with inconsistent definition
Reusable query components which are not found in the element directory table RSZELTDIR are displayed. This situation may cause the short dump 'Exception condition INCONSISTENCY' during accessing the affected component in Query Designer or execution the affected query in RSRT. Further investigations are required at SAP. Create an OSS note for the SAP component BW-BEX-ET-QDEF.
3.3 Components without InfoProvider assignment
All reusable query component (except variables) should be assigned to a particular InfoProvider. This assignment is located in the table RSZCOMPIC. When the record is not found in this table, the affected component may become not available in Query Designer in the corresponding InfoProvider. In some cases the error message "Component XXX.. (version A) has no InfoCube assignment". Further investigations are required at SAP. Create an OSS note for the SAP component BW-BEX-ET-QDEF.
3.4 Components with empty ONWER field
Reusable components which have empty OWNER field in the table RSZCOMPDIR are accessible by users having $USER setting in the authorization object S_RS_COMP1 (users which are authorized to their own queries or query components). This leads to authorization concept violation.
For error solution the field OWNER in the RSZCOMPDIR should be filled with any value. Execute the corresponding edit mode in order to fill the empty field with user 'SAP'. This will prevent the potential authorization violation for users with $USER setting and will take no effect on the users without this setting.
4. Table RSZELTXREF
The table RSZELTXREF contains all links and dependencies between the query elements within a query or query component.
The following errors can be found:
- missing elements (INCONSISTENCY dump);
- not supported relations between query elements;
- extended RSZELTXREF check.
4.1 Missing elements
Missing elements are those query elements which exist as the dependant objects (field TELTUID) in the table RSZELTXREF, but not available in the element directory table RSZELTDIR in corresponding object version. In case, when such elements are used in any query or other query components (STR, CKF or RKF), this may lead to ABAP short dump with 'Exception condition INCONSISTENCY' error message in query run-time or design-time. Other known symptoms of this error is, that structures, calculated key figures or restricted key figures are not available in an Info Provider in Query Designer during design-time.
The missing elements which are in use in other queries or query components, can not be automatically repaired or deleted without components where those elements are used. In most cases the manual repair operations directly in the DB tables are required. Create an OSS message for SAP component BW-BEX-ET-QDEF for further investigations and creation of a repair plan.
The missing elements which are not in use in any query or query components, can be deleted from the system via corresponding delete procedure. This deletion will not affect any existing query or query component.
ATTENTION: if missing element is variable, it can be repaired in some cases automatically using the corresponding repair procedure. See table RSZGLOBV check 5.1. 'Variables with inconsistent definition' for details.
4.2 Not supported relations between query elements
Some relations between query elements which are not supported and can cause dumps in ABAP or terminations in Query Designer (for example link STR <--> VAR). Such cases have to be additionally investigated at SAP. Create an OSS message for SAP component BW-BEX-ET-QDEF.
4.3 Extended RSZELTXREF check
The extended RSZELTXREF check outputs 2 situations which, in combination with other conditions in the system, may be responsible for slow performance of all operations which involve select from the table RSZELTXREF and resolving the relations between query elements (query load, query generation, expanding of a variable list for corresponding InfoObject, expanding of a list of reusable components in Query Designer,... etc.):
- records with empty INFOCUBE field
- records which are not used in any query or query component
Records with empty INFOCUBE field
The current algorithm of resolving of relations between the query elements uses an optimization which allows to reduce the amount of data selected from the table RSZELTXREF during such operations are query load, query generate, expand a list of reusable components (STR, CKF, RKF) and so on. All relations between query elements within one reusable component based on one InfoProvider 'N' are also located within the same InfoProvider. The system has to select only records where the INFOCUBE field contain the same InfoProvider 'N' and in addition to this all other records where the INFOCUBE field is empty. This is necessary, because in all BW releases below 3.x the INFOCUBE field was not in the RSZELTXREF table and all components created before 3.x release have this field empty. Selection of records with empty INFOCUBE is required in order to ensure the consistency of processed query.
When the number of records with empty INFOCUBE is quite large (50.000 - 1 mln records), any simple operation which require resolving of the relations may take a long time, because those records are always being selected, loaded to Query Designer and processed in the design-time.
Records which are not used in any query or query component
The program makes a virtual attempt to reconstruct the table RSZELTXREF via resolving the relations between all reusable components existing in the system. All records which are not used in any query or query components are considered as non-used records. Usually these are fragments of old queries or other components which are not deleted due to former errors in the query delete algorithm.
The current version of the program contain only information about those 2 issues. See the OSS note 823804 for additional information.
ATTENTION: the extended RSZELTXREF check is recommended when all critical problems with reusable components are resolved and the system clean-up is done (no useless records in the tables, no useless non-executable queries or other affected query component available).
Starting from SP28 for BW 30B, SP22 for BW 31C and SP14 for BW 3.5 the Extended RSZELTXREF check detects and fixes the following situations:
records used in existing queries or query components with empty INFOCUBE field;
records used in existing queries or query components with wrong INFOCUBE assignment;
records with or without INFOCUBE assignment which are not used in any query or query component.
For further check details read the OSS note 859086.
5. Table RSZGLOBV
The table RSZGLOBV contains the definitions and technical properties of the variables.
The following errors can be found:
- variables with inconsistent definition;
- variables with missing or incorrect properties;
5.1 Variables with inconsistent definition. Variable not found in RSZELTDIR/RSZCOMPDIR tables.
The variable existing in the table RSZGLOBV, but not existing in the tables RSZELTDIR or RSZCOMPDIR have inconsistent definition. These situation may return 2 different error messages. When a variable is missing in RSZELTDIR table (or in both together), an attempt to expand a list of variable under a corresponding InfoProvider or a list of text/formula variables will return a message 'Inconsistency in loading...'. All variables which are created for corresponding InfoProvider, text/formula variable are not available. When a variable is missing in the RSZCOMPDIR table only the error message is 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded' in Query Designer.
In both cases the variables can be repaired via the corresponding procedure provided in the program under the technical name (COMPID) corresponding to the name in VNAM field in the table RSZGLOBV with the text 'REPAIRED BY SAP'.
As an alternative solution, when the affected variables which are not used in any query or query component can be deleted directly from the RSZGLOBV table. Both solutions will fix the reported symptoms.
ATTENTION: it is recommended to open a repaired variable in Variable Wizard of Query Designer and to adjust the definition of this variable, when it is necessary.
ATTENTION: deletion of the affected variables missing in the table RSZCOMPDIR is not possible using transaction RSZDELETE. An attempt to delete such variable will return the error message 'Component not found'.
5.2 Variables with missing or incorrect properties
Several errors can be found within this check. The variables of different type have their own sets of properties. Missing or incorrect properties may cause different error message during execution of a query where such variables are in use. In the case of the affect variables with processing type 'replacement' , the replacement may not work because of the problem.
Each case has to be investigated at SAP. Create an OSS message for SAP component BW-BEX-ET-QDEF.
6. Table RSZELTDIR
The table RSZELTDIR is the main directory table containing all query elements available in the system.
ATTENTION: the RSZELTDIR check may take a long running time depending upon the table size.
The following errors can be found:
- local elements not in use;
- reusable elements not in RSZCOMPDIR table;
- reusable elements not in RSZCOMPIC table;
- structure (STR) without structure members;
- selections or RKF without definition in RSZSELECT table;
- formulas or CKF without definition in RSZCALC table;
- variables (VAR) without definition in RSZGLOBV table;
- queries (REP) without entries in RSRREPDIR table.
6.1 Local elements not in use
Local elements (field REUSABLE = false) which are not used as dependant objects in the table RSZELTXREF. These elements are useless and not accessible from Query Designer. Usually these are fragments of the definitions of old queries accumulated in system because of different problems with save/delete procedures which are not accessible by the end users. The recommended solution is to delete those elements using the corresponding delete procedure.
6.2 Reusable elements not in RSZCOMPDIR table
Reusable elements (field REUSABLE = true) must have a corresponding entry in the table RSZCOMPDIR which contains the definition and properties of this reusable component. An attempt to load such component in Query Designer may cause the error message 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded'. Additional investigations are requires at SAP. Create an OSS message for BW-BEX-ET-QDEF.
ATTENTION: Deletion of such affected components is also not possible using transaction RSZDELETE. An attempt to delete will return the message 'Component not found'.
6.3 Reusable elements not in RSZCOMPIC table
Reusable elements (field REUSABLE = true), except variables (DEFTP = 'VAR'), must have a corresponding entry in the table RSZCOMPIC which contains an InfoProvider assignment for reusable components. When a reusable component has no InfoProvider assignment it may be not available in Query Designer during design-time. Additional investigations are required at SAP. Create an OSS message for BW-BEX-ET-QDEF. In case the affected component is useless, it can be also deleted from the system using transaction RSZDELETE.
6.4 Structures (STR) without structure members
Reusable and non-reusable structures (DEFTP = 'STR') should have dependant elements (structure members). When these structure members are not found a query containing this structure returns the error message 'Element structure not correct' during generation or execution in RSRT or BEx analyzer. The program outputs a query technical name where such structures are used or the technical name of an InfoProvider if the affected structure is reusable and not used in any query. In this case it can be accessed from any query created in the same InfoProvider in Query Designer. The solution is to open the affected structure in using the latest available version of Query Designer and to create the required structure members in order to avoid the error message.
In case, when the affecter structure is local (non-reusable) and is not used in any query, this structure is not accessible by frontend users and can be deleted from the system by corresponding procedure provided in the program.
6.5 Local selection of RKFs without records in RSZSELECT table
Local selections and reusable Restricted Key Figure (DEFTP = 'SEL') usually should have the corresponding records in the DB table RSZSELECT. The program outputs all selections found in the system which have no corresponding records in the RSZSELECT table.
Usually this issue has no impact on the existing queries and produces no error messages. There are 3 possible types of selections within a query:
Normal selection - this selection represents a characteristic in Row, Columns or Free Characteristics area, Conditions or Exceptions. This situation produces no error messages, but the selection is not taken into account by OLAP.
Dummy structure member - structure member type selection can be defined using Query Designer. Such structure member produces no selection and can be used only as place holder within a query. This situation produces no error messages during generation/execution of a query containing a structure with those dummy structure members.
Cell selection - this type of selection is usually used as Cell selection and can be defined using Cell Editor in Query Designer. This situation produces no error messages, but the selection is not taken into account by OLAP.
If it is necessary, the selection definition can adjusted using the latest available version of Query Designer. The affected local selections can be accessed from the queries presented in the WHERE-USED (INFOCUBE/QUERY). The Restricted Key Figures are available in Query Designer from any query created on the corresponding InfoProvider.
In case, when a local selection is not used in any query or query components the recommended solution is to delete this selection using the corresponding delete procedure.
6.6 Local formulas of CKFs without records in RSZCALC table
Local formulas (DEFTP = 'FML') or Calculated Key Figures (DEFTP = 'CKF') should contain definition of the calculations in the table RSZCALC. When such definition is not found in the table RSZCALC the queries or query components which include those affected objects can not be generated or executed by OLAP. An attempt to generate such query returns the error message 'The (sub) formula XXX... is not available'.
The definitions of the affected formulas or Calculated Key Figures can be adjusted using the latest available version of Query Designer. The adjustment of a local formula is possible from the corresponding query listed presented in the program. The Calculated Key Figures are available in Query Designer from any query created on the corresponding InfoProvider.
In case, when a local formula is not used in any query or query components the recommended solution is to delete this formula using the corresponding delete procedure.
6.7 Variables without records in RSZGLOBV table
Variables (DEFTP = 'VAR') should exist in the table RSZGLOBV. The table RSZGLOBV contains all processing properties and definition of the variables. Query where such variables are used can not be executed without problems.
The repair procedure is not possible, because of missing definition. In case, when such variable is not used in any query, the recommended solution is to delete it from the system in order to avoid potential problems. If the affected variable is already used in other queries or query components, create an OSS message for SAP component BW-BEX-ET-QDEF. Further investigations and possible repair plan have to be created at SAP.
6.8 Queries without records in RSRREPDIR table
Queries (DEFTP = 'REP') should exist in the table RSRREPDIR. The table RSRREPDIR is a header table of generated reports and also a part of the database view V_REP_JOIN which provides data for the BEx Open/Save Dialogs.
A query which does not exist in the table RSRREPDIR is not accessible via RSRT transaction (error message 'GENUNIID not found') and not displayed in the Open/Save Dialogs of fronted applications.
The recommended solution is to delete such queries using the corresponding procedure provided in the program and similar to RSZDELETE.
In some cases the repair procedure is also possible. The success of the repair procedure depends upon the consistency of the affected query, the existence of a valid InfoProvider for this query and some other factors. For repair attempt create an OSS message for the SAP component BW-BEX-ET-QDEF.
hope this helps. -
What is the table of future cash flows (coupan flows).
Hi experts,
Can you please tell me what is the table of future cash flows.
I am using securities module in transaction manger.
I am using t.code- TS01 for creating a deal transaction. it is generating a future cash flows ion case of bonds.
but not able to figure out in which table it is storing these flows. TPM 13 is a transaction code to see cash flows.
I need this table to devolope some BI reports
Please help.
Regards
Gaurav GuptaHi Guarav,
you can use logical databases like FTI_TR_PERIODS to create own reporting based on SAP queries, but they don't contain any data.
The cash flow data you see in TPM13 is from the TRL* tables and views, eg. TRLV_TRANS_POS or TRLV_FLOW. This data is valuation area dependant. To see transaction data you should check TRD* tables, for security account class data you better use TRS*.
Nevertheless, for BI reporting SAP offers some extractors with which you can get data from Treasury and furnish it to BI. For example, with 0CFM_INIT_POSITIONS you set initial position (like TPM12). With 0CFM_DELTA_POSITIONS you can then provide positions for further key dates and create BI reports that valuate delta flows. The DataSource 0CFM_O01 contains information about all position relevant flows, 0FM_O02 about reversed flows.
Extractor 0CFM_DELTA_POSITIONS and other 0CFM* extractors are generally based on logical databases, so you can e.g. create a query based on FTI_TR_PERIODS to check results that would be extracted to BI using 0CFM_DELTA_POSITIONS.
BR, Tomislav -
How can find what are the customers are created in my earlier version.
Hi all,I am trying to find out how can I check the what are the customers are created in my earlier version of sap (i.e 4.7B)
My client Upgrade d the 5.0 in 2007. Now my client asking, list of WDs which are created in the 4.7B.Hi,
You know when the SAP went live with the new version.
In t.code SE16, enter table name KNA1.
In the field created on put value of new SAP version go-live date and select a < symbol by double clicking the field. Then click on execute button, the system will provide the customer master created before the new version go-live date.
Regards,
Maybe you are looking for
-
Why can't I log into my iTunes account on the iTunes Store
I have been trying to log on to my iTunes account on the iTunes Store and it says accessing iTunes Store. I left it all day and night and its been 24 hours and nothing has changed
-
PAYMENT IDOC PEXR2002, Authorization, setup procedures.
Dear Members, Can somebody throw some light on how to learn the following requirements: 1) Creation of Outgoing Payment Idoc in PEXR2002 format. (Also would like to know what are the different types of payment run) 2) How to setup or trigger the Auth
-
K7N420pro issues...
Excuse if I take a bit too long to explain what the issue is, but I am hoping to give good info. I'm a novice. We ran the board for around 8 months before we had a problem with it. At the time I attempted to boot it up and got a hdd disk read error.
-
TS1424 itunes only downloaded part of a song I purchased. How do I correct that?
itunes only downloaded part of a song I purchased. How do I fix it or get a refund?
-
2.1 Software Upgrade Renders iTouch Disabled
I upgraded and paid the $9.95 plus tax, to upgrade the software to version 2.1 earlier today. iTunes charged me with no problem, the file downloaded with no problem, but then came the install and restore process... after which I started tearing my hi