What is the Tcode for Account Statement

Hi Gurus,
What is Tcode for Accounts STatement. Please help, i have some work.
regs
rams

sorry , F.27
Message was edited by: Chandrasekhar Jagarlamudi

Similar Messages

  • What is the tcode for plant wise g/l account list

    Dear Experts
    Can you help on this "what is the tcode for plant wise g/l account list"
    Regards
    B

    Hi Bhaskar,
    G/L accounts wont be plant wise.It will be either chart of accounts level or compant code level.
    The best thing you can do is to derive the company code for the plants from the table T001K assuming the valuation level is at plant level.
    Now after deriving the company code go to transaction SE16 and give the company code derived above in the table SKB1 and generate the G/L account list.
    Hope this is clear if not  please clearly explain more elaborately on the exact requirement why you need plant wise g/l account list for appropiate solution.

  • What is the tcode for creating material receipt

    Hi,
    what is the tcode for creating material receipt & payment to the vendor

    Hi,
    You recieve your material from the vendor and do a Goods Reciept in MIGO with mvt 101. You can even enter via T-Code - MB1C.
    Once you get your Invoice for this reciept from your vendor, you then do invoice verification in MIRO.
    After verification, if there is no blocking of the invoices and is posted and released, a accounting document is released during the posting of MIRO. These documents are then referred by FI pals, who are responsible for the payment.
    Hope this gives you a clear picture.
    Anand
    Message was edited by:
            Anand.B.K.

  • What is the Tcodes for Uploading of data using BDC & CATT

    PP members:
    I was going through the <b>cutover activities</b> ,  and what I understood is  we transfer all the legacy system data into SAP before going live
    The data upload follows certain steps (depends on the organizational design load strategies)
    First we upload all the master data ( material master, BOM, W/C's & Routings)
    Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
    If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as <b>materials of the previous stage</b> and necessary adjustments shall be made after cutover day
    At this point, I could not able to understand what does the author mean <b>materials of the previous stage</b>
    Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
    Is it a must to use <b>only LSMW tool</b> to upload master data or any other upload tools are fine
    Lastly,. I am not sure about the Tcode of CATT & BDC
    Summary of the questions:
    1.What does the author mean  <b>material of previous stage</b>, for WIP materials during cutover activities
    2. Is it mandatory to use only LSMW tool for uploading for master data
    3. What are the Tcodes for upload tools CATT & BDC ?
    Thanks for your time
    Suren R

    Dear,
    1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
    2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
    3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

  • What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?

    Hi Guys,
    What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?
    I have to write an AP Invoice Aging Report in Discoverer to show all unpaid invoices that have been transferred into GL... Business wants it to match one-to-one with the AP Trial Balance standard report...
    Business wants to run the report for any date in a past...
    The report has two parameters:
    As Of Date - the same as As of Date for the AP Trial Report
    Trial Balance Run Date - the date when Trial Balance was run...
    Conditions are:
    TRUNC(Invoice Date) <=TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
    TRUNC(NVL(Payment Date,'01-JAN-5000')) > TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
    TRUNC(Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
    Distr Accounting Date <= TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
    NVL(Distr Creation Date,Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
    Show_Flag = 'YES', where:
    Show_Flag = CASE WHEN ( NVL(Cancelled Date,'01-JAN-1901') > NVL(:As Of Date,SYSDATE) AND NVL(Inv Amount Aud,0) = 0 ) THEN 'YES' ELSE ( CASE WHEN NVL(Inv Amount Aud,0) = 0 THEN 'NO' ELSE 'YES' END ) END
    There is a difference between the logic of my report, and the logic of AP Trial Balance...
    Could you please advise what I'm missing?
    Thanks,
    Iana

    What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10? You can get the code by opening the report in Reports Builder and get the query.
    Or, enable trace/debug as per (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]).
    Thanks,
    Hussein

  • What is the TCODE for number change of idoc

    Hi all,
    can anyone help me in chnaging the number range of IDOCS in R/3 system..
    what is the TCODE for that...
    Thanks in advance.
    Cheers,
    Raghavesh

    Hi,
    Please go to transaction SNUM/SNRO and use object EDIDOC.
    Select number range and change to specific number that you wish.
    Hope this will help.
    Regards,
    Ferry Lianto

  • What is the Tcode for WBS Hierarchies in R/3

    Hi All,
    What is the Tcode for WBS Hierarchies in R/3? and more over how can we include WBS element groups in our bw reports.
    and one more does any relation between WBS element Hierarchy and WBS element Group
    Regards,
    Sekhar

    Hi Shekar
    CJE0    Run Hierarchy Report
    CJE1    Create Hierarchy Report
    CJE2    Change Hierarchy Report
    CJE3    Display Hierarchy Report
    In a work breakdown structure (WBS), you describe the individual tasks and activities in the
    project as individual elements in a hierarchy.
    Depending on the phase of your project, you continue to break down the tasks and activities in
    your project, step-by-step, until you reach the level of detail necessary to carry it out.
    The individual elements represent activities within the work breakdown structure. The elements
    are called work breakdown structure elements (WBS elements) in the Project System. WBS
    elements can be:
      Tasks
      Partial tasks which are subdivided further
      Work packages

  • What is the tcode for Nominee Form 2 ?

    Dear Mates,
    Kindly help to me what is the Tcode for Nominee Form 2 ?
    Ur's Mohan

    Dear Sandeep,
    Yes we have maintained IT 591 & i didn't any output in EPF report related to this info type 0591. Anyway now my client is asking me form 2 for nominee details kindly let me know is there any tcode?
    Ur's Mohan

  • What is the tcode for Run ''Remittance Completeness Check''

    Hi all,
    What is the tcode for Remittance completeness check ?
    Thanks
    Jerry

    Hello Jerry,
    The transaction to program RPURMC00 is PC00_M99_URMC.
    I hope this information is helpful.
    Kind regards,
    Graziela

  • What is the Tcode for document header.

    HI all.
    What is the Tcode for document header.

    Hi,
    Post Document: Header Data (FBR2)
    Purpose
    Use this procedure to post a new document referencing (copying all or part) of an existing document.  This process will also allow the user to reverse a document that cannot be reversed using transaction FB08.
    Trigger
    Perform this procedure when there is a need to post with reference an existing document to create a new document.  Or to reverse a document that cannot be reversed using transaction FB08.
    Prerequisites
    Before beginning this task, obtain the following information.
    ·         Document number and fiscal year of the document to be referenced or reversed
        Document being referenced must be a posted document.
    ·         If applicable, the reversal reason code
    Menu Path
    Use the following menu path(s) to begin this transaction:
    ·         N/A
    Transaction Code
    FBR2
    Helpful Hints
    Generate reverse posting can be used when using transaction FB08 is not possible.  Examples provided below.
    ·         Original document types such as WA and ZF cannot be reversed using the FB08 transaction
    ·         Document was already reversed but the reversing document is incorrect
    ·         Document to be reversed is a reversing document
    ·         R/O/C/D indicates a field is required, optional, conditional (dependent upon another selection) or the information defaults (based on previously entered information or system configuration)
    Reward if helpful
    Jagadish

  • What is the Tcode for Aggregate Statstics Table and PSA table

    What is the Tcode for Aggregate Statstics Table and PSA table

    Hii raina..
    There is no such perticular Tcode to check PSA data . Go to RSA1 and open ur DS . Right click and say manage. U will get PSA data.. But their should be data in PSA 
    I hope thjis is useful to u.

  • What is the Tcode for Zform

    what is the Tcode for Zform

    Hi Basha,
    Transaction code: SE71 can be used for form/script/layout.
    Transaction code: SE38 can be used for print/driver program.
    Hope this helps.
    Thanks,
    Srinivasa

  • What is the Tcode for Jet form

    what is the Tcode for Jet form

    hi
    good
    go through this link
    http://www.stethos.com/e_sap_extern.htm
    reward point if hlepful.
    thanks
    mrutyun^

  • What is the Tcode for creation of SC..

    HI all,
    I am very new for the SRM..
    Can any body please tell me what is the tcode for creation of SC...?

    Hi,
    The browser transactions can not be started from the Easy Access Menu (from the start page).
    When you getting the message "Transaction BBPSC03 cannot be called in the Easy Access Menu; see long text" just hit:
    /n (in command window)
    and then you can start/enter the transaction(BBPSC03/BBPSC01) what you want.
    BR,
    Disha.

  • What is the tcode for creating a variant ??

    Dear Guru,
    I want to know What is the tcode for creating a variant  which is being used for SM30 's variant option .
    Because we have created a maintenance view and we want to run this trhough tcode..
    but dont know how to do it.
    pls guide through out the procedure.
    thanks & regards
    Saifur rahaman

    Hi,
    If you want to create the TCODE for the TMG you created you must go for Parameter Transaction
    Go to SE93
    Give your Tcode
    Click Create , select parameter transaction Radio Button
    In the Transaction Field Give SM30
    Check the Check box SKIP INITIAL SCREEN
    select your GUI support and SAVE
    in the space provided give F4
    Select        VIEWNAME and give your table name
    Select                  UPDATE  give it as X
    then SAVE
    Edited by: Prasanth Kasturi on Nov 25, 2008 6:54 AM

Maybe you are looking for

  • Blank error when opening a PDF in Acrobat Standard 9

    I get a Blank Error every time i try to open a PDF in Adobe Acrobat Standard 9.  How do I get rid of it?

  • Multiple CLOB's/BLOB's in one SELECT

    Hi Is there a standard way to retrieve several CLOB fields from a resultset? I get an SQLException, Stream has already been closed if I do not select the fields out, one at a time. What is the correct way to deal with this? I'd love to be able to whi

  • TouchSmart 600 unable to connect to Internet & email accounts. Error Code 0x80070057

    TouchSmart 600 unable to connect to Internet & email accounts.  Receive Windows Network Diagnostics error message "An unexpected error has occurred.  The troubleshooting wizard can't continue"  Error Code: 0x80070057.  Using old laptop to send this m

  • Don't they know about vibration problems?

    Hi, I got a macbook, it is 3 days old, and it vibrates every time I use it. I have to place a business card under it to dampen the vibration so that I can work comfortably. I called the Apple Support and the specialist said he had never heard about t

  • Safe Protection of file access by all means

    Hello, we currently in an implementation project we we get delivered sensitive denormalised data from special ledger. Denormalised means in this case that we post transaction data and master data attributes in one file. This is done due to technical