What is the TCODE for number change of idoc

Hi all,
can anyone help me in chnaging the number range of IDOCS in R/3 system..
what is the TCODE for that...
Thanks in advance.
Cheers,
Raghavesh

Hi,
Please go to transaction SNUM/SNRO and use object EDIDOC.
Select number range and change to specific number that you wish.
Hope this will help.
Regards,
Ferry Lianto

Similar Messages

What is the Tcode for WBS Hierarchies in R/3

Hi All,
What is the Tcode for WBS Hierarchies in R/3? and more over how can we include WBS element groups in our bw reports.
and one more does any relation between WBS element Hierarchy and WBS element Group
Regards,
Sekhar

Hi Shekar
CJE0    Run Hierarchy Report
CJE1    Create Hierarchy Report
CJE2    Change Hierarchy Report
CJE3    Display Hierarchy Report
In a work breakdown structure (WBS), you describe the individual tasks and activities in the
project as individual elements in a hierarchy.
Depending on the phase of your project, you continue to break down the tasks and activities in
your project, step-by-step, until you reach the level of detail necessary to carry it out.
The individual elements represent activities within the work breakdown structure. The elements
are called work breakdown structure elements (WBS elements) in the Project System. WBS
elements can be:
Tasks
Partial tasks which are subdivided further
Work packages

What is the Tcode for document header.

HI all.
What is the Tcode for document header.

Hi,
Post Document: Header Data (FBR2)
Purpose
Use this procedure to post a new document referencing (copying all or part) of an existing document. This process will also allow the user to reverse a document that cannot be reversed using transaction FB08.
Trigger
Perform this procedure when there is a need to post with reference an existing document to create a new document. Or to reverse a document that cannot be reversed using transaction FB08.
Prerequisites
Before beginning this task, obtain the following information.
·         Document number and fiscal year of the document to be referenced or reversed
    Document being referenced must be a posted document.
·         If applicable, the reversal reason code
Menu Path
Use the following menu path(s) to begin this transaction:
·         N/A
Transaction Code
FBR2
Helpful Hints
Generate reverse posting can be used when using transaction FB08 is not possible. Examples provided below.
·         Original document types such as WA and ZF cannot be reversed using the FB08 transaction
·         Document was already reversed but the reversing document is incorrect
·         Document to be reversed is a reversing document
·         R/O/C/D indicates a field is required, optional, conditional (dependent upon another selection) or the information defaults (based on previously entered information or system configuration)
Reward if helpful
Jagadish

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

What is the equivalent for 'On Change of' Event in ABAP OBJECTS?

What is the equivalent for 'On Change of' Event in ABAP OBJECTS? and how to use it in LOOP control?

hi,
There is no such Equivalent in OO ABAP.
You have to Raise your own Event within tha class checking the value of the field whose value is changing.
Regards
Sumit Agarwal

What is the tcode for plant wise g/l account list

Dear Experts
Can you help on this "what is the tcode for plant wise g/l account list"
Regards
B

Hi Bhaskar,
G/L accounts wont be plant wise.It will be either chart of accounts level or compant code level.
The best thing you can do is to derive the company code for the plants from the table T001K assuming the valuation level is at plant level.
Now after deriving the company code go to transaction SE16 and give the company code derived above in the table SKB1 and generate the G/L account list.
Hope this is clear if not please clearly explain more elaborately on the exact requirement why you need plant wise g/l account list for appropiate solution.

What is the tcode for Nominee Form 2 ?

Dear Mates,
Kindly help to me what is the Tcode for Nominee Form 2 ?
Ur's Mohan

Dear Sandeep,
Yes we have maintained IT 591 & i didn't any output in EPF report related to this info type 0591. Anyway now my client is asking me form 2 for nominee details kindly let me know is there any tcode?
Ur's Mohan

What is the tcode for Run ''Remittance Completeness Check''

Hi all,
What is the tcode for Remittance completeness check ?
Thanks
Jerry

Hello Jerry,
The transaction to program RPURMC00 is PC00_M99_URMC.
I hope this information is helpful.
Kind regards,
Graziela

What is the tcode for creating material receipt

Hi,
what is the tcode for creating material receipt & payment to the vendor

Hi,
You recieve your material from the vendor and do a Goods Reciept in MIGO with mvt 101. You can even enter via T-Code - MB1C.
Once you get your Invoice for this reciept from your vendor, you then do invoice verification in MIRO.
After verification, if there is no blocking of the invoices and is posted and released, a accounting document is released during the posting of MIRO. These documents are then referred by FI pals, who are responsible for the payment.
Hope this gives you a clear picture.
Anand
Message was edited by:
Anand.B.K.

What is the Tcode for Aggregate Statstics Table and PSA table

What is the Tcode for Aggregate Statstics Table and PSA table

Hii raina..
There is no such perticular Tcode to check PSA data . Go to RSA1 and open ur DS . Right click and say manage. U will get PSA data.. But their should be data in PSA
I hope thjis is useful to u.

What is the Tcode for Zform

what is the Tcode for Zform

Hi Basha,
Transaction code: SE71 can be used for form/script/layout.
Transaction code: SE38 can be used for print/driver program.
Hope this helps.
Thanks,
Srinivasa

What is the Tcode for Jet form

what is the Tcode for Jet form

hi
good
go through this link
http://www.stethos.com/e_sap_extern.htm
reward point if hlepful.
thanks
mrutyun^

What is the Tcode for creation of SC..

HI all,
I am very new for the SRM..
Can any body please tell me what is the tcode for creation of SC...?

Hi,
The browser transactions can not be started from the Easy Access Menu (from the start page).
When you getting the message "Transaction BBPSC03 cannot be called in the Easy Access Menu; see long text" just hit:
/n (in command window)
and then you can start/enter the transaction(BBPSC03/BBPSC01) what you want.
BR,
Disha.

What is the tcode for creating a variant ??

Dear Guru,
I want to know What is the tcode for creating a variant which is being used for SM30 's variant option .
Because we have created a maintenance view and we want to run this trhough tcode..
but dont know how to do it.
pls guide through out the procedure.
thanks & regards
Saifur rahaman

Hi,
If you want to create the TCODE for the TMG you created you must go for Parameter Transaction
Go to SE93
Give your Tcode
Click Create , select parameter transaction Radio Button
In the Transaction Field Give SM30
Check the Check box SKIP INITIAL SCREEN
select your GUI support and SAVE
in the space provided give F4
Select VIEWNAME and give your table name
Select UPDATE give it as X
then SAVE
Edited by: Prasanth Kasturi on Nov 25, 2008 6:54 AM

What are the Tcodes commanly used in ALE-IDOCs?

Hi,
What are the Tcodes commanly used in ALE-IDOCs?
Regards,
Chow.

Hi,
Go through the following Tcode for ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards,
Priyanka.

What is the TCODE for number change of idoc

Similar Messages

Maybe you are looking for